Results for am-view

View, filter, and convert SAM/BAM/CRAM alignments — Rust port of samtools view

Simple wgpu based SLAM map viewer.

view composer is a dynamic way to compose view objects

Presenters and Model-View-Presenter (MVP) is the second most useful pattern after Service Objects to simplify your medium-to-large app. ActiveModelPresenter is a small gem that transforms ActiveRecord models into simple decorated objects that you can use to pass data for a JSON or a regular View rendering. It's based on Rails' **active_model_serializers** gem (AMS) so you get all it's features without creating any new type of files. It can be used as a layer for Rails between Controller and View to make data to flow in 1 direction.

This is a fork of the wicked_pdf gem which allows Rails < 2.3.4 to run. Basically no really big changes, so I am leaving most of this the same, and hopefully it will be pulled into the master. Wicked PDF uses the shell utility wkhtmltopdf to serve a PDF file to a user from HTML. In other words, rather than dealing with a PDF generation DSL of some sort, you simply write an HTML view as you would normally, and let Wicked take care of the hard stuff.

Twitterpunch =============== Twitterpunch is designed to work with PhotoBooth and OS X Folder Actions. When this script is called with the name of an image file, it will post the image to Twitter, along with a message randomly chosen from a list and a specified hashtag. If you call the script with the `--stream` argument instead, it will listen for tweets to that hashtag and download them to a specified directory. If the tweet came from another user, Twitterpunch will speak it aloud. Typically, you'll run one copy on an OSX laptop with PhotoBooth, and a separate copy on another machine (either Windows or OSX) for the viewer. You can also use a mobile device as a remote control, if you like. This will allow the user to enter a custom message for each photo that gets tweeted out, if they'd like. Configuration =========== Configure the program via the `~/.twitterpunch/config.yaml` YAML file. This file should look similar to the example below. --- :twitter: # twitter configuration :consumer_key: &lt;consumer key&gt; :consumer_secret: &lt;consumer secret&gt; :access_token: &lt;access token&gt; :access_token_secret: &lt;access secret&gt; :messages: # list of messages to attach - Hello there # to outgoing tweets - I'm a posting fool - minimally viable product :hashtag: Twitterpunch # The hashtag to post and listen to :handle: Twitterpunch # The twitter username to post as :photodir: ~/Pictures/twitterpunch/ # Where to save downloaded images :logfile: ~/.twitterpunch/activity.log # Where to save logs :viewer: # Use the built-in slideshow viewer :count: 5 # How many images to have onscreen at once :remote: :timeout: 45 # How long the button should remain disabled for :apptitle: dslrBooth # The photo booth application title :hotkey: space # Which hotkey to send to trigger a photo 1. Generate a skeleton configuration file * `twitterpunch --configure` 1. Edit the configuration file as needed. You'll be prompted with the path. * If you have your own Twitter application credentials, you're welcome to use them. 1. Authorize the application with the Twitter API. * `twitterpunch --authorize` Usage ========== ### Using OS X PhotoBooth 1. Start PhotoBooth at least once to generate its library. 1. Install the Twitterpunch Folder Action * `twitterpunch --install` * It may claim that it could not be attached, fear not. 1. Profit! * _and by that, I mean take some shots with PhotoBooth!_ *Note*: if the folder action doesn't seem to work and photos aren't posted to Twitter, here are some troubleshooting steps to take: 1. Run Twitterpunch by hand with photos as arguments. This may help you isolate configuration or authorization issues. * `twitterpunch foo.jpg` 1. Correct the path in the workflow. * `which twitterpunch` * Edit the Twitterpunch folder action to include that path. #### Using the remote web app Configure the remote web app using the `:remote` hash in `config.yaml`. You can usually find the title of the app using `system_profiler -detailLevel full SPApplicationsDataType` and grepping for the name or path to the `.app`. In this example, the title is _dslrBooth_. [ben@ganymede] ~ $ system_profiler -detailLevel full SPApplicationsDataType | grep -B8 dslrBooth.app dslrBooth: Version: 2.9 Obtained from: Identified Developer Last Modified: 10/14/17, 9:50 PM Kind: Intel 64-Bit (Intel): Yes Signed by: Developer ID Application: Hope Pictures LLC (MZR5GHAQX4), Developer ID Certification Authority, Apple Root CA Location: /Applications/dslrBooth.app 1. Run the app with `twitterpunch --remote` 1. Browse to the app with http://{address}:8080 1. [optional] If on an iOS device, add to your homescreen * This will give you "app behaviour", such as full screen, and a nice icon #### Troubleshooting. 1. Make sure the folder action is installed properly 1. Use the Finder to navigate to `~/Pictures/` 1. Right click on the `Photo Booth Library` icon and choose _Show Package Contents_. 1. Right click on the `Pictures` folder and choose `Services &gt; Folder Actions Setup` 1. Make sure that the `Twitterpunch` action is attached. 1. Install the folder action 1. Open the `resources` folder of this gem. * Likely to be found in `/Library/Ruby/Gems/{version}/gems/twitterpunch-#{version}/resources/`. 1. Double click on the `Twitterpunch` folder action and install it. * It may claim that it could not be attached, fear not. ### Using something besides PhotoBooth Configure the program you are using for your photo shoot to call Twitterpunch each time it snaps a photo. Pass the name of the new photo as a command line argument. Alternatively, you could batch them, as Twitterpunch can accept multiple files at once. [ben@ganymede] ~ $ twitterpunch photo.jpg [photo2.jpg photo3.jpg photo4.jpg] You can manually install the Folder Action, or you can follow the automated install process after tweaking the workflow slightly. 1. Identify where the app stores the resulting image files. 1. Edit the Twitterpunch folder action to include that path. 1. Follow the steps above to install the Folder Action. ### Viewing the Twitter stream Twitterpunch will run on OS X or Windows equally well. Simply configure it on the computer that will act as the Twitter display and then run in streaming mode. [ben@ganymede] ~ $ twitterpunch --stream There are two modes that Twitterpunch can operate in. 1. If a `:hashtag` is defined then all images tweeted to the configured hashtag will be displayed in the slideshow. 1. Otherwise, Twitterpunch will stream the `:handle` Twitter user's stream and display all images either posted by that user or addressed to that user. With protected tweets, you can have rudimentary access control. In either mode, tweets that come from any other user will also be spoken aloud. If you don't want to use the built-in slideshow viewer, you can disable it by removing the `:viewer` key from your `~/.twitterpunch/config.yaml` config file. Twitterpunch will then simply download the tweeted images and save them into the `:photodir` directory. You can then use anything you like to view them. There are currently two decent viewing options I am aware of. * Windows background image: * Configure the Windows background to randomly cycle through photos in a directory. * Hide desktop icons. * Hide the taskbar. * Disable screensaver and power savings. * Drawbacks: You're using Windows and you have to install Ruby &amp; RubyGems manually. * OS X screensaver: * Choose one of the sexy screensavers and configure it to show photos from the `:photodir` * Set screensaver to a super short timeout. * Disable power savings. * Drawbacks: The screensaver doesn't reload dynamically, so I have to kick it and you'll see it reloading each time a new tweet comes in. Limitations =========== * It currently requires manual setup for Folder Actions. * Rubygame is kind of a pain to set up. Contact ======= * Author: Ben Ford * Email: binford2k@gmail.com * Twitter: @binford2k * IRC (Freenode): binford2k

== README.md: #ScheduledResource This gem is for displaying how things are used over time -- a schedule for a set of "resources". You can configure the elements of the schedule and there are utilities and protocols to connect them: - Configuration (specification and management), - Query interfaces (a REST-like API and internal protocols to query the models), and - A basic Rails controller implementation. We have a way to configure the schedule, internal methods to generate the data, and a way to retrieve data from the client. However this gem is largely view-framework agnostic. We could use a variety of client-side packages or even more traditional Rails view templates to generate HTML. In any case, to get a good feel in a display like this we need some client-side code. The gem includes client-side modules to: - Manage &lt;b&gt;time and display geometries&lt;/b&gt; with "infinite" scroll along the time axis. - &lt;b&gt;Format display cells&lt;/b&gt; in ways specific to the resource models. - &lt;b&gt;Update text justification&lt;/b&gt; as the display is scrolled horizontally. ## Configuration A **scheduled resource** is something that can be used for one thing at a time. So if "Rocky &amp; Bullwinkle" is on channel 3 from 10am to 11am on Saturday, then 'channel 3' is the &lt;u&gt;resource&lt;/u&gt; and that showing of the episode is a &lt;u&gt;resource-use&lt;/u&gt; block. Resources and use-blocks are typically Rails models. Each resource and its use-blocks get one row in the display. That row has a label to the left with some timespan visible on the rest of the row. Something else you would expect see in a schedule would be headers and labels -- perhaps one row with the date and another row with the hour. Headers and labels also fit the model of resources and use-blocks. Basic timezone-aware classes (ZTime*) for those are included in this gem. ### Config File The schedule configuration comes from &lt;tt&gt;config/resource_schedule.yml&lt;/tt&gt; which has three top-level sections: - ResourceKinds: A hash where the key is a Resource and the value is a UseBlock. (Both are class names), - Resources: A list where each item is a Resource Class followed by one or more resource ids, and - visibleTime: The visible timespan of the schedule in seconds. The example file &lt;tt&gt;config/resource_schedule.yml&lt;/tt&gt; (installed when you run &lt;tt&gt;schedulize&lt;/tt&gt;) should be enough to display a two-row schedule with just the date above and the hour below. Of course you can monkey-patch or subclass these classes for your own needs. ### The schedule API The 'schedule' endpoint uses parameters &lt;tt&gt;t1&lt;/tt&gt; and &lt;tt&gt;t2&lt;/tt&gt; to specify a time interval for the request. A third parameter &lt;tt&gt;inc&lt;/tt&gt; allows an initial time window to be expanded without repeating blocks that span those boundaries. The time parameters _plus the configured resources_ define the data to be returned. ### More About Configuration Management The &lt;b&gt;ScheduledResource&lt;/b&gt; class manages resource and use-block class names, id's and labels for a schedule according to the configuration file. A ScheduledResource instance ties together: 1. A resource class (eg TvStation), 2. An id (a channel number in this example), and 3. Strings and other assets that will go into the DOM. The id is used to - select a resource _instance_ and - select instances of the _resource use block_ class (eg Program instances). The id _could_ be a database id but more often is something a little more suited to human use in the configuration. In any case it is used by model class method &lt;tt&gt;(resource_use_block_class).get_all_blocks()&lt;/tt&gt; to select the right use-blocks for the resource. A resource class name and id are are joined with a '_' to form a tag that also serves as an id for the DOM. Once the configuration yaml is loaded that data is maintained in the session structure. Of course having a single configuration file limits the application's usefulness. A more general approach would be to have a user model with login and configuration would be associated with the user. ## Installation Add this line to your application's Gemfile: ```ruby gem 'scheduled_resource' ``` And then execute: $ bundle Or install it yourself as: $ gem install scheduled_resource Then from your application's root execute: $ schedulize . This will install a few image placeholders, client-side modules and a stylesheet under &lt;tt&gt;vendor/assets&lt;/tt&gt;, an example configuration in &lt;tt&gt;config/resource_schedule.yml&lt;/tt&gt; and an example controller in &lt;tt&gt;app/controllers/schedule_controller.rb&lt;/tt&gt;. Also, if you use $ bundle show scheduled_resource to locate the installed source you can browse example classes &lt;tt&gt;lib/z_time_*.rb&lt;/tt&gt; and the controller helper methods in &lt;tt&gt;lib/scheduled_resource/helper.rb&lt;/tt&gt; ## Testing This gem also provides for a basic test application using angularjs to display a minimal but functional schedule showing just the day and hour headers in two different timezones (US Pacific and Eastern). Proceed as follows, starting with a fresh Rails app: $ rails new test_sr As above, add the gem to the Gemfile, then $ cd test_sr $ bundle $ schedulize . Add lines such as these to &lt;tt&gt;config/routes.rb&lt;/tt&gt; get "/schedule/index" =&gt; "schedule#index" get "/schedule" =&gt; "schedule#schedule" Copy / merge these files from the gem source into the test app: $SR_SRC/app/views/layouts/application.html.erb $SR_SRC/app/views/schedule/index.html.erb $SR_SRC/app/assets/javascripts/{angular.js,script.js,controllers.js} and add &lt;tt&gt;//= require angular&lt;/tt&gt; to application.js just below the entries for &lt;tt&gt;jquery&lt;/tt&gt;. After you run the server and browse to http://0.0.0.0:3000/schedule/index you should see the four time-header rows specified by the sample config file. ## More Examples A better place to see the use of this gem is at [tv4](https://github.com/emeyekayee/tv4). Specifically, models &lt;tt&gt;app/models/event.rb&lt;/tt&gt; and &lt;tt&gt;app/models/station.rb&lt;/tt&gt; give better examples of implementing the ScheduledResource protocol and adapting to a db schema organized along somewhat different lines. ## Contributing 1. Fork it ( https://github.com/emeyekayee/scheduled_resource/fork ) 2. Create your feature branch (`git checkout -b my-new-feature`) 3. Commit your changes (`git commit -am 'Add some feature'`) 4. Push to the branch (`git push origin my-new-feature`) 5. Create a new Pull Request

= TMail http://tmail.rubyforge.org/ Mikel Lindsaar maintainer Trans assitant developer Minero Aoki original developer == NOTE: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ! THIS IS A FORK OF TMAIL HACKED TOGETHER TO WORK WITH RUBY 1.9.1 ! ! USE AT YOUR OWN DISCRETION ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! == DESCRIPTION: TMail is a mail handling library for Ruby. It abstracts a mail message into a usable object allowing you to read, set, add and delete headers and the mail body. TMail is used by the Ruby on Rails web framework as the Email abstraction layer for their ActionMailer module. It is also used by the Nitro framework and many other applications on and off the web. The goal of the TMail handling library is to be able to parse and handle raw Email sources and produce RFC compliant Emails as a result. If you find something that TMail does that violates an RFC, we want to know and we'll get it fixed fast. == DOCUMENTATION: The place you will want to look first is the TMail::Mail class. This has the vast majority of methods you will be using to talk to your TMail object. == FEATURES/PROBLEMS: TMail is fairly RFC compliant on the handling of emails. There are also some problems in the header handling, but for 99.9% of email, you will be fine. Usually, the problems revolve around parsing incomming emails and making sense of them. I really welcome any examples of Emails that "didn't work" with TMail so I can use them as test cases. == SYNOPSIS: TMail is very easy to use. You simply require the library and then pass a raw email text message into the TMail::Mail.parse method. This returns a TMail::Mail object which you can now query and run methods against to modify, inspect or add to the Email. You can find almost all of the methods that you will use to talk to and update a TMail instance in the TMail::Mail class. I am constantly updating this code, with comments, added a fair bit and have a lot more to go!. === Short Version: irb(main):001:0&gt; require 'tmail' irb(main):002:0&gt; raw_email = File.open("my_raw_email", 'r') { |f| @mail = f.read } irb(main):003:0&gt; email = TMail::Mail.parse(raw_email) irb(main):004:0&gt; puts email['to'] mikel@example.com =&gt; nil irb(main):005:0&gt; email['to'] = 'mikel@somewhere.else.com' =&gt; "mikel@somewhere.else.com" irb(main):006:0&gt; puts email['to'] mikel@somewhere.else.com =&gt; nil === Longer Version: Assuming you have a single raw email in the variable my_message, you can do the following: require 'tmail' email = TMail::Mail.parse(my_message) This will give you a TMail::Mail class containing your parsed message. There are other methods of opening emails through Ports. You can view this email by a simple puts: puts email Return-Path: &lt;mikel@nowhere.com&gt; Date: Sun, 21 Oct 2007 19:38:13 +1000 From: Mikel Lindsaar &lt;mikel@nowhere.com&gt; To: mikel@somewhere.com Message-Id: &lt;009601c813c6$19df3510$0437d30a@mikel091a&gt; Subject: Testing Email Hello Mikel Easy right? === Adding a header to the EMail: Say now that you have opened your message, you want to put in a Reply-To field. You do this like so: email['reply-to'] = "My Email Address &lt;my_address@anotherplace.com&gt;" Is it really there? Well, find out with a puts: puts email Return-Path: &lt;mikel@nowhere.com&gt; Date: Sun, 21 Oct 2007 19:38:13 +1000 From: Mikel Lindsaar &lt;mikel@nowhere.com&gt; Reply-To: My Email Address &lt;my_address@anotherplace.com&gt; To: mikel@somewhere.com Message-Id: &lt;009601c813c6$19df3510$0437d30a@mikel091a&gt; Subject: Testing Email Hello Mikel Yup looks good. === Inspecting a header: You can then inspect your added header by doing: email['reply-to'] # =&gt; #&lt;TMail::AddressHeader "My Email Address &lt;my_address@anotherplace.com&gt;"&gt; If you just want to the actual value, not the AddressHeader object, pass to_s to this. email['reply-to'].to_s # =&gt; "My Email Address &lt;my_address@anotherplace.com&gt;" === Deleting a header: One way of deleting a header from an Email is just assigning it nil like so: email['reply-to'] = nil # =&gt; nil If you now puts the email again, it will not be included: puts email Return-Path: &lt;mikel@nowhere.com&gt; Date: Sun, 21 Oct 2007 19:38:13 +1000 From: Mikel Lindsaar &lt;mikel@nowhere.com&gt; To: mikel@somewhere.com Message-Id: &lt;009601c813c6$19df3510$0437d30a@mikel091a&gt; Subject: Testing Email Hello Mikel === Writing out an Email: You can just call to_s on any email to have it serialized out as a single string with the right number of line breaks and encodings. == CONTRIBUTING: You can visit the {Contributing to TMail}[link:http://tmail.rubyforge.org/contributing/] to find out how to contribute to TMail, developers are welcome and wanted! == REQUIREMENTS: * C compiler if you want the Ruby extension for Scanner * Ruby 1.8 or later == INSTALLATION: * sudo gem install tmail Or manually, * sudo script/setup == LICENSE: (The MIT License) Copyright (c) 2007 FIX Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the 'Software'), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED 'AS IS', WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

# Overview This guide documents the InsightVM Application Programming Interface (API) Version 3. This API supports the Representation State Transfer (REST) design pattern. Unless noted otherwise this API accepts and produces the `application/json` media type. This API uses Hypermedia as the Engine of Application State (HATEOAS) and is hypermedia friendly. All API connections must be made to the security console using HTTPS. ## Versioning Versioning is specified in the URL and the base path of this API is: `https://<host>:<port>/api/3/`. ## Specification An <a target="_blank" href="https://github.com/OAI/OpenAPI-Specification/blob/master/versions/2.0.md">OpenAPI v2</a> specification (also known as Swagger 2) of this API is available. Tools such as <a target="_blank" href="https://github.com/swagger-api/swagger-codegen">swagger-codegen</a> can be used to generate an API client in the language of your choosing using this specification document. <p class="openapi">Download the specification: <a class="openapi-button" target="_blank" download="" href="/api/3/json"> Download </a></p> ## Authentication Authorization to the API uses HTTP Basic Authorization (see <a target="_blank" href="https://www.ietf.org/rfc/rfc2617.txt">RFC 2617</a> for more information). Requests must supply authorization credentials in the `Authorization` header using a Base64 encoded hash of `"username:password"`. <!-- ReDoc-Inject: <security-definitions> --> ### 2FA This API supports two-factor authentication (2FA) by supplying an authentication token in addition to the Basic Authorization. The token is specified using the `Token` request header. To leverage two-factor authentication, this must be enabled on the console and be configured for the account accessing the API. ## Resources ### Naming Resource names represent nouns and identify the entity being manipulated or accessed. All collection resources are pluralized to indicate to the client they are interacting with a collection of multiple resources of the same type. Singular resource names are used when there exists only one resource available to interact with. The following naming conventions are used by this API: | Type | Case | | --------------------------------------------- | ------------------------ | | Resource names | `lower_snake_case` | | Header, body, and query parameters parameters | `camelCase` | | JSON fields and property names | `camelCase` | #### Collections A collection resource is a parent resource for instance resources, but can itself be retrieved and operated on independently. Collection resources use a pluralized resource name. The resource path for collection resources follow the convention: ``` /api/3/{resource_name} ``` #### Instances An instance resource is a "leaf" level resource that may be retrieved, optionally nested within a collection resource. Instance resources are usually retrievable with opaque identifiers. The resource path for instance resources follows the convention: ``` /api/3/{resource_name}/{instance_id}... ``` ## Verbs The following HTTP operations are supported throughout this API. The general usage of the operation and both its failure and success status codes are outlined below. | Verb | Usage | Success | Failure | | --------- | ------------------------------------------------------------------------------------- | ----------- | -------------------------------------------------------------- | | `GET` | Used to retrieve a resource by identifier, or a collection of resources by type. | `200` | `400`, `401`, `402`, `404`, `405`, `408`, `410`, `415`, `500` | | `POST` | Creates a resource with an application-specified identifier. | `201` | `400`, `401`, `404`, `405`, `408`, `413`, `415`, `500` | | `POST` | Performs a request to queue an asynchronous job. | `202` | `400`, `401`, `405`, `408`, `410`, `413`, `415`, `500` | | `PUT` | Creates a resource with a client-specified identifier. | `200` | `400`, `401`, `403`, `405`, `408`, `410`, `413`, `415`, `500` | | `PUT` | Performs a full update of a resource with a specified identifier. | `201` | `400`, `401`, `403`, `405`, `408`, `410`, `413`, `415`, `500` | | `DELETE` | Deletes a resource by identifier or an entire collection of resources. | `204` | `400`, `401`, `405`, `408`, `410`, `413`, `415`, `500` | | `OPTIONS` | Requests what operations are available on a resource. | `200` | `401`, `404`, `405`, `408`, `500` | ### Common Operations #### OPTIONS All resources respond to the `OPTIONS` request, which allows discoverability of available operations that are supported. The `OPTIONS` response returns the acceptable HTTP operations on that resource within the `Allow` header. The response is always a `200 OK` status. ### Collection Resources Collection resources can support the `GET`, `POST`, `PUT`, and `DELETE` operations. #### GET The `GET` operation invoked on a collection resource indicates a request to retrieve all, or some, of the entities contained within the collection. This also includes the optional capability to filter or search resources during the request. The response from a collection listing is a paginated document. See [hypermedia links](#section/Overview/Paging) for more information. #### POST The `POST` is a non-idempotent operation that allows for the creation of a new resource when the resource identifier is not provided by the system during the creation operation (i.e. the Security Console generates the identifier). The content of the `POST` request is sent in the request body. The response to a successful `POST` request should be a `201 CREATED` with a valid `Location` header field set to the URI that can be used to access to the newly created resource. The `POST` to a collection resource can also be used to interact with asynchronous resources. In this situation, instead of a `201 CREATED` response, the `202 ACCEPTED` response indicates that processing of the request is not fully complete but has been accepted for future processing. This request will respond similarly with a `Location` header with link to the job-oriented asynchronous resource that was created and/or queued. #### PUT The `PUT` is an idempotent operation that either performs a create with user-supplied identity, or a full replace or update of a resource by a known identifier. The response to a `PUT` operation to create an entity is a `201 Created` with a valid `Location` header field set to the URI that can be used to access to the newly created resource. `PUT` on a collection resource replaces all values in the collection. The typical response to a `PUT` operation that updates an entity is hypermedia links, which may link to related resources caused by the side-effects of the changes performed. #### DELETE The `DELETE` is an idempotent operation that physically deletes a resource, or removes an association between resources. The typical response to a `DELETE` operation is hypermedia links, which may link to related resources caused by the side-effects of the changes performed. ### Instance Resources Instance resources can support the `GET`, `PUT`, `POST`, `PATCH` and `DELETE` operations. #### GET Retrieves the details of a specific resource by its identifier. The details retrieved can be controlled through property selection and property views. The content of the resource is returned within the body of the response in the acceptable media type. #### PUT Allows for and idempotent "full update" (complete replacement) on a specific resource. If the resource does not exist, it will be created; if it does exist, it is completely overwritten. Any omitted properties in the request are assumed to be undefined/null. For "partial updates" use `POST` or `PATCH` instead. The content of the `PUT` request is sent in the request body. The identifier of the resource is specified within the URL (not the request body). The response to a successful `PUT` request is a `201 CREATED` to represent the created status, with a valid `Location` header field set to the URI that can be used to access to the newly created (or fully replaced) resource. #### POST Performs a non-idempotent creation of a new resource. The `POST` of an instance resource most commonly occurs with the use of nested resources (e.g. searching on a parent collection resource). The response to a `POST` of an instance resource is typically a `200 OK` if the resource is non-persistent, and a `201 CREATED` if there is a resource created/persisted as a result of the operation. This varies by endpoint. #### PATCH The `PATCH` operation is used to perform a partial update of a resource. `PATCH` is a non-idempotent operation that enforces an atomic mutation of a resource. Only the properties specified in the request are to be overwritten on the resource it is applied to. If a property is missing, it is assumed to not have changed. #### DELETE Permanently removes the individual resource from the system. If the resource is an association between resources, only the association is removed, not the resources themselves. A successful deletion of the resource should return `204 NO CONTENT` with no response body. This operation is not fully idempotent, as follow-up requests to delete a non-existent resource should return a `404 NOT FOUND`. ## Requests Unless otherwise indicated, the default request body media type is `application/json`. ### Headers Commonly used request headers include: | Header | Example | Purpose | | ------------------ | --------------------------------------------- | ---------------------------------------------------------------------------------------------- | | `Accept` | `application/json` | Defines what acceptable content types are allowed by the client. For all types, use `*/*`. | | `Accept-Encoding` | `deflate, gzip` | Allows for the encoding to be specified (such as gzip). | | `Accept-Language` | `en-US` | Indicates to the server the client's locale (defaults `en-US`). | | `Authorization ` | `Basic Base64("username:password")` | Basic authentication | | `Token ` | `123456` | Two-factor authentication token (if enabled) | ### Dates & Times Dates and/or times are specified as strings in the ISO 8601 format(s). The following formats are supported as input: | Value | Format | Notes | | --------------------------- | ------------------------------------------------------ | ----------------------------------------------------- | | Date | YYYY-MM-DD | Defaults to 12 am UTC (if used for a date & time | | Date & time only | YYYY-MM-DD'T'hh:mm:ss[.nnn] | Defaults to UTC | | Date & time in UTC | YYYY-MM-DD'T'hh:mm:ss[.nnn]Z | | | Date & time w/ offset | YYYY-MM-DD'T'hh:mm:ss[.nnn][+&#124;-]hh:mm | | | Date & time w/ zone-offset | YYYY-MM-DD'T'hh:mm:ss[.nnn][+&#124;-]hh:mm[<zone-id>] | | ### Timezones Timezones are specified in the regional zone format, such as `"America/Los_Angeles"`, `"Asia/Tokyo"`, or `"GMT"`. ### Paging Pagination is supported on certain collection resources using a combination of two query parameters, `page` and `size`. As these are control parameters, they are prefixed with the underscore character. The page parameter dictates the zero-based index of the page to retrieve, and the `size` indicates the size of the page. For example, `/resources?page=2&size=10` will return page 3, with 10 records per page, giving results 21-30. The maximum page size for a request is 500. ### Sorting Sorting is supported on paginated resources with the `sort` query parameter(s). The sort query parameter(s) supports identifying a single or multi-property sort with a single or multi-direction output. The format of the parameter is: ``` sort=property[,ASC|DESC]... ``` Therefore, the request `/resources?sort=name,title,DESC` would return the results sorted by the name and title descending, in that order. The sort directions are either ascending `ASC` or descending `DESC`. With single-order sorting, all properties are sorted in the same direction. To sort the results with varying orders by property, multiple sort parameters are passed. For example, the request `/resources?sort=name,ASC&sort=title,DESC` would sort by name ascending and title descending, in that order. ## Responses The following response statuses may be returned by this API. | Status | Meaning | Usage | | ------ | ------------------------ |------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | | `200` | OK | The operation performed without error according to the specification of the request, and no more specific 2xx code is suitable. | | `201` | Created | A create request has been fulfilled and a resource has been created. The resource is available as the URI specified in the response, including the `Location` header. | | `202` | Accepted | An asynchronous task has been accepted, but not guaranteed, to be processed in the future. | | `400` | Bad Request | The request was invalid or cannot be otherwise served. The request is not likely to succeed in the future without modifications. | | `401` | Unauthorized | The user is unauthorized to perform the operation requested, or does not maintain permissions to perform the operation on the resource specified. | | `403` | Forbidden | The resource exists to which the user has access, but the operating requested is not permitted. | | `404` | Not Found | The resource specified could not be located, does not exist, or an unauthenticated client does not have permissions to a resource. | | `405` | Method Not Allowed | The operations may not be performed on the specific resource. Allowed operations are returned and may be performed on the resource. | | `408` | Request Timeout | The client has failed to complete a request in a timely manner and the request has been discarded. | | `413` | Request Entity Too Large | The request being provided is too large for the server to accept processing. | | `415` | Unsupported Media Type | The media type is not supported for the requested resource. | | `500` | Internal Server Error | An internal and unexpected error has occurred on the server at no fault of the client. | ### Security The response statuses 401, 403 and 404 need special consideration for security purposes. As necessary, error statuses and messages may be obscured to strengthen security and prevent information exposure. The following is a guideline for privileged resource response statuses: | Use Case | Access | Resource | Permission | Status | | ------------------------------------------------------------------ | ------------------ |------------------- | ------------ | ------------ | | Unauthenticated access to an unauthenticated resource. | Unauthenticated | Unauthenticated | Yes | `20x` | | Unauthenticated access to an authenticated resource. | Unauthenticated | Authenticated | No | `401` | | Unauthenticated access to an authenticated resource. | Unauthenticated | Non-existent | No | `401` | | Authenticated access to a unauthenticated resource. | Authenticated | Unauthenticated | Yes | `20x` | | Authenticated access to an authenticated, unprivileged resource. | Authenticated | Authenticated | No | `404` | | Authenticated access to an authenticated, privileged resource. | Authenticated | Authenticated | Yes | `20x` | | Authenticated access to an authenticated, non-existent resource | Authenticated | Non-existent | Yes | `404` | ### Headers Commonly used response headers include: | Header | Example | Purpose | | -------------------------- | --------------------------------- | --------------------------------------------------------------- | | `Allow` | `OPTIONS, GET` | Defines the allowable HTTP operations on a resource. | | `Cache-Control` | `no-store, must-revalidate` | Disables caching of resources (as they are all dynamic). | | `Content-Encoding` | `gzip` | The encoding of the response body (if any). | | `Location` | | Refers to the URI of the resource created by a request. | | `Transfer-Encoding` | `chunked` | Specified the encoding used to transform response. | | `Retry-After` | 5000 | Indicates the time to wait before retrying a request. | | `X-Content-Type-Options` | `nosniff` | Disables MIME type sniffing. | | `X-XSS-Protection` | `1; mode=block` | Enables XSS filter protection. | | `X-Frame-Options` | `SAMEORIGIN` | Prevents rendering in a frame from a different origin. | | `X-UA-Compatible` | `IE=edge,chrome=1` | Specifies the browser mode to render in. | ### Format When `application/json` is returned in the response body it is always pretty-printed (indented, human readable output). Additionally, gzip compression/encoding is supported on all responses. #### Dates & Times Dates or times are returned as strings in the ISO 8601 'extended' format. When a date and time is returned (instant) the value is converted to UTC. For example: | Value | Format | Example | | --------------- | ------------------------------ | --------------------- | | Date | `YYYY-MM-DD` | 2017-12-03 | | Date & Time | `YYYY-MM-DD'T'hh:mm:ss[.nnn]Z` | 2017-12-03T10:15:30Z | #### Content In some resources a Content data type is used. This allows for multiple formats of representation to be returned within resource, specifically `"html"` and `"text"`. The `"text"` property returns a flattened representation suitable for output in textual displays. The `"html"` property returns an HTML fragment suitable for display within an HTML element. Note, the HTML returned is not a valid stand-alone HTML document. #### Paging The response to a paginated request follows the format: ```json { resources": [ ... ], "page": { "number" : ..., "size" : ..., "totalResources" : ..., "totalPages" : ... }, "links": [ "first" : { "href" : "..." }, "prev" : { "href" : "..." }, "self" : { "href" : "..." }, "next" : { "href" : "..." }, "last" : { "href" : "..." } ] } ``` The `resources` property is an array of the resources being retrieved from the endpoint, each which should contain at minimum a "self" relation hypermedia link. The `page` property outlines the details of the current page and total possible pages. The object for the page includes the following properties: - number - The page number (zero-based) of the page returned. - size - The size of the pages, which is less than or equal to the maximum page size. - totalResources - The total amount of resources available across all pages. - totalPages - The total amount of pages. The last property of the paged response is the `links` array, which contains all available hypermedia links. For paginated responses, the "self", "next", "previous", "first", and "last" links are returned. The "self" link must always be returned and should contain a link to allow the client to replicate the original request against the collection resource in an identical manner to that in which it was invoked. The "next" and "previous" links are present if either or both there exists a previous or next page, respectively. The "next" and "previous" links have hrefs that allow "natural movement" to the next page, that is all parameters required to move the next page are provided in the link. The "first" and "last" links provide references to the first and last pages respectively. Requests outside the boundaries of the pageable will result in a `404 NOT FOUND`. Paginated requests do not provide a "stateful cursor" to the client, nor does it need to provide a read consistent view. Records in adjacent pages may change while pagination is being traversed, and the total number of pages and resources may change between requests within the same filtered/queries resource collection. #### Property Views The "depth" of the response of a resource can be configured using a "view". All endpoints supports two views that can tune the extent of the information returned in the resource. The supported views are `summary` and `details` (the default). View are specified using a query parameter, in this format: ```bash /<resource>?view={viewName} ``` #### Error Any error responses can provide a response body with a message to the client indicating more information (if applicable) to aid debugging of the error. All 40x and 50x responses will return an error response in the body. The format of the response is as follows: ```json { "status": <statusCode>, "message": <message>, "links" : [ { "rel" : "...", "href" : "..." } ] } ``` The `status` property is the same as the HTTP status returned in the response, to ease client parsing. The message property is a localized message in the request client's locale (if applicable) that articulates the nature of the error. The last property is the `links` property. This may contain additional [hypermedia links](#section/Overview/Authentication) to troubleshoot. #### Search Criteria <a section="section/Responses/SearchCriteria"></a> Multiple resources make use of search criteria to match assets. Search criteria is an array of search filters. Each search filter has a generic format of: ```json { "field": "<field-name>", "operator": "<operator>", ["value": "<value>",] ["lower": "<value>",] ["upper": "<value>"] } ``` Every filter defines two required properties `field` and `operator`. The field is the name of an asset property that is being filtered on. The operator is a type and property-specific operating performed on the filtered property. The valid values for fields and operators are outlined in the table below. Every filter also defines one or more values that are supplied to the operator. The valid values vary by operator and are outlined below. ##### Fields The following table outlines the search criteria fields and the available operators: | Field | Operators | | --------------------------------- | ------------------------------------------------------------------------------------------------------------------------------ | | `alternate-address-type` | `in` | | `container-image` | `is` ` is-not` ` starts-with` ` ends-with` ` contains` ` does-not-contain` ` is-like` ` not-like` | | `container-status` | `is` ` is-not` | | `containers` | `are` | | `criticality-tag` | `is` ` is-not` ` is-greater-than` ` is-less-than` ` is-applied` ` is-not-applied` | | `custom-tag` | `is` ` is-not` ` starts-with` ` ends-with` ` contains` ` does-not-contain` ` is-applied` ` is-not-applied` | | `cve` | `is` ` is-not` ` contains` ` does-not-contain` | | `cvss-access-complexity` | `is` ` is-not` | | `cvss-authentication-required` | `is` ` is-not` | | `cvss-access-vector` | `is` ` is-not` | | `cvss-availability-impact` | `is` ` is-not` | | `cvss-confidentiality-impact` | `is` ` is-not` | | `cvss-integrity-impact` | `is` ` is-not` | | `cvss-v3-confidentiality-impact` | `is` ` is-not` | | `cvss-v3-integrity-impact` | `is` ` is-not` | | `cvss-v3-availability-impact` | `is` ` is-not` | | `cvss-v3-attack-vector` | `is` ` is-not` | | `cvss-v3-attack-complexity` | `is` ` is-not` | | `cvss-v3-user-interaction` | `is` ` is-not` | | `cvss-v3-privileges-required` | `is` ` is-not` | | `host-name` | `is` ` is-not` ` starts-with` ` ends-with` ` contains` ` does-not-contain` ` is-empty` ` is-not-empty` ` is-like` ` not-like` | | `host-type` | `in` ` not-in` | | `ip-address` | `is` ` is-not` ` in-range` ` not-in-range` ` is-like` ` not-like` | | `ip-address-type` | `in` ` not-in` | | `last-scan-date` | `is-on-or-before` ` is-on-or-after` ` is-between` ` is-earlier-than` ` is-within-the-last` | | `location-tag` | `is` ` is-not` ` starts-with` ` ends-with` ` contains` ` does-not-contain` ` is-applied` ` is-not-applied` | | `mobile-device-last-sync-time` | `is-within-the-last` ` is-earlier-than` | | `open-ports` | `is` ` is-not` ` in-range` | | `operating-system` | `contains` ` does-not-contain` ` is-empty` ` is-not-empty` | | `owner-tag` | `is` ` is-not` ` starts-with` ` ends-with` ` contains` ` does-not-contain` ` is-applied` ` is-not-applied` | | `pci-compliance` | `is` | | `risk-score` | `is` ` is-not` ` in-range` ` greater-than` ` less-than` | | `service-name` | `contains` ` does-not-contain` | | `site-id` | `in` ` not-in` | | `software` | `contains` ` does-not-contain` | | `vAsset-cluster` | `is` ` is-not` ` contains` ` does-not-contain` ` starts-with` | | `vAsset-datacenter` | `is` ` is-not` | | `vAsset-host-name` | `is` ` is-not` ` contains` ` does-not-contain` ` starts-with` | | `vAsset-power-state` | `in` ` not-in` | | `vAsset-resource-pool-path` | `contains` ` does-not-contain` | | `vulnerability-assessed` | `is-on-or-before` ` is-on-or-after` ` is-between` ` is-earlier-than` ` is-within-the-last` | | `vulnerability-category` | `is` ` is-not` ` starts-with` ` ends-with` ` contains` ` does-not-contain` | | `vulnerability-cvss-v3-score` | `is` ` is-not` | | `vulnerability-cvss-score` | `is` ` is-not` ` in-range` ` is-greater-than` ` is-less-than` | | `vulnerability-exposures` | `includes` ` does-not-include` | | `vulnerability-title` | `contains` ` does-not-contain` ` is` ` is-not` ` starts-with` ` ends-with` | | `vulnerability-validated-status` | `are` | ##### Enumerated Properties The following fields have enumerated values: | Field | Acceptable Values | | ----------------------------------------- | ------------------------------------------------------------------------------------------------------------- | | `alternate-address-type` | 0=IPv4, 1=IPv6 | | `containers` | 0=present, 1=not present | | `container-status` | `created` `running` `paused` `restarting` `exited` `dead` `unknown` | | `cvss-access-complexity` | <ul><li><code>L</code> = Low</li><li><code>M</code> = Medium</li><li><code>H</code> = High</li></ul> | | `cvss-integrity-impact` | <ul><li><code>N</code> = None</li><li><code>P</code> = Partial</li><li><code>C</code> = Complete</li></ul> | | `cvss-confidentiality-impact` | <ul><li><code>N</code> = None</li><li><code>P</code> = Partial</li><li><code>C</code> = Complete</li></ul> | | `cvss-availability-impact` | <ul><li><code>N</code> = None</li><li><code>P</code> = Partial</li><li><code>C</code> = Complete</li></ul> | | `cvss-access-vector` | <ul><li><code>L</code> = Local</li><li><code>A</code> = Adjacent</li><li><code>N</code> = Network</li></ul> | | `cvss-authentication-required` | <ul><li><code>N</code> = None</li><li><code>S</code> = Single</li><li><code>M</code> = Multiple</li></ul> | | `cvss-v3-confidentiality-impact` | <ul><li><code>L</code> = Local</li><li><code>L</code> = Low</li><li><code>N</code> = None</li><li><code>H</code> = High</li></ul> | | `cvss-v3-integrity-impact` | <ul><li><code>L</code> = Local</li><li><code>L</code> = Low</li><li><code>N</code> = None</li><li><code>H</code> = High</li></ul> | | `cvss-v3-availability-impact` | <ul><li><code>N</code> = None</li><li><code>L</code> = Low</li><li><code>H</code> = High</li></ul> | | `cvss-v3-attack-vector` | <ul><li><code>N</code> = Network</li><li><code>A</code> = Adjacent</li><li><code>L</code> = Local</li><li><code>P</code> = Physical</li></ul> | | `cvss-v3-attack-complexity` | <ul><li><code>L</code> = Low</li><li><code>H</code> = High</li></ul> | | `cvss-v3-user-interaction` | <ul><li><code>N</code> = None</li><li><code>R</code> = Required</li></ul> | | `cvss-v3-privileges-required` | <ul><li><code>N</code> = None</li><li><code>L</code> = Low</li><li><code>H</code> = High</li></ul> | | `host-type` | 0=Unknown, 1=Guest, 2=Hypervisor, 3=Physical, 4=Mobile | | `ip-address-type` | 0=IPv4, 1=IPv6 | | `pci-compliance` | 0=fail, 1=pass | | `vulnerability-validated-status` | 0=present, 1=not present | ##### Operator Properties <a section="section/Responses/SearchCriteria/OperatorProperties"></a> The following table outlines which properties are required for each operator and the appropriate data type(s): | Operator | `value` | `lower` | `upper` | | ----------------------|-----------------------|-----------------------|-----------------------| | `are` | `string` | | | | `contains` | `string` | | | | `does-not-contain` | `string` | | | | `ends with` | `string` | | | | `in` | `Array[ string ]` | | | | `in-range` | | `numeric` | `numeric` | | `includes` | `Array[ string ]` | | | | `is` | `string` | | | | `is-applied` | | | | | `is-between` | | `numeric` | `numeric` | | `is-earlier-than` | `numeric` | | | | `is-empty` | | | | | `is-greater-than` | `numeric` | | | | `is-on-or-after` | `string` (yyyy-MM-dd) | | | | `is-on-or-before` | `string` (yyyy-MM-dd) | | | | `is-not` | `string` | | | | `is-not-applied` | | | | | `is-not-empty` | | | | | `is-within-the-last` | `numeric` | | | | `less-than` | `string` | | | | `like` | `string` | | | | `not-contains` | `string` | | | | `not-in` | `Array[ string ]` | | | | `not-in-range` | | `numeric` | `numeric` | | `not-like` | `string` | | | | `starts-with` | `string` | | | #### Discovery Connection Search Criteria <a section="section/Responses/DiscoverySearchCriteria"></a> Dynamic sites make use of search criteria to match assets from a discovery connection. Search criteria is an array of search filters. Each search filter has a generic format of: ```json { "field": "<field-name>", "operator": "<operator>", ["value": "<value>",] ["lower": "<value>",] ["upper": "<value>"] } ``` Every filter defines two required properties `field` and `operator`. The field is the name of an asset property that is being filtered on. The list of supported fields vary depending on the type of discovery connection configured for the dynamic site (e.g vSphere, ActiveSync, etc.). The operator is a type and property-specific operating performed on the filtered property. The valid values for fields outlined in the tables below and are grouped by the type of connection. Every filter also defines one or more values that are supplied to the operator. See <a href="#section/Responses/SearchCriteria/OperatorProperties">Search Criteria Operator Properties</a> for more information on the valid values for each operator. ##### Fields (ActiveSync) This section documents search criteria information for ActiveSync discovery connections. The discovery connections must be one of the following types: `"activesync-ldap"`, `"activesync-office365"`, or `"activesync-powershell"`. The following table outlines the search criteria fields and the available operators for ActiveSync connections: | Field | Operators | | --------------------------------- | ------------------------------------------------------------- | | `last-sync-time` | `is-within-the-last` ` is-earlier-than` | | `operating-system` | `contains` ` does-not-contain` | | `user` | `is` ` is-not` ` contains` ` does-not-contain` ` starts-with` | ##### Fields (AWS) This section documents search criteria information for AWS discovery connections. The discovery connections must be the type `"aws"`. The following table outlines the search criteria fields and the available operators for AWS connections: | Field | Operators | | ----------------------- | ------------------------------------------------------------- | | `availability-zone` | `contains` ` does-not-contain` | | `guest-os-family` | `contains` ` does-not-contain` | | `instance-id` | `contains` ` does-not-contain` | | `instance-name` | `is` ` is-not` ` contains` ` does-not-contain` ` starts-with` | | `instance-state` | `in` ` not-in` | | `instance-type` | `in` ` not-in` | | `ip-address` | `in-range` ` not-in-range` ` is` ` is-not` | | `region` | `in` ` not-in` | | `vpc-id` | `is` ` is-not` ` contains` ` does-not-contain` ` starts-with` | ##### Fields (DHCP) This section documents search criteria information for DHCP discovery connections. The discovery connections must be the type `"dhcp"`. The following table outlines the search criteria fields and the available operators for DHCP connections: | Field | Operators | | --------------- | ------------------------------------------------------------- | | `host-name` | `is` ` is-not` ` contains` ` does-not-contain` ` starts-with` | | `ip-address` | `in-range` ` not-in-range` ` is` ` is-not` | | `mac-address` | `is` ` is-not` ` contains` ` does-not-contain` ` starts-with` | ##### Fields (Sonar) This section documents search criteria information for Sonar discovery connections. The discovery connections must be the type `"sonar"`. The following table outlines the search criteria fields and the available operators for Sonar connections: | Field | Operators | | ------------------- | -------------------- | | `search-domain` | `contains` ` is` | | `ip-address` | `in-range` ` is` | | `sonar-scan-date` | `is-within-the-last` | ##### Fields (vSphere) This section documents search criteria information for vSphere discovery connections. The discovery connections must be the type `"vsphere"`. The following table outlines the search criteria fields and the available operators for vSphere connections: | Field | Operators | | -------------------- | ------------------------------------------------------------------------------------------ | | `cluster` | `is` ` is-not` ` contains` ` does-not-contain` ` starts-with` | | `data-center` | `is` ` is-not` | | `discovered-time` | `is-on-or-before` ` is-on-or-after` ` is-between` ` is-earlier-than` ` is-within-the-last` | | `guest-os-family` | `contains` ` does-not-contain` | | `host-name` | `is` ` is-not` ` contains` ` does-not-contain` ` starts-with` | | `ip-address` | `in-range` ` not-in-range` ` is` ` is-not` | | `power-state` | `in` ` not-in` | | `resource-pool-path` | `contains` ` does-not-contain` | | `last-time-seen` | `is-on-or-before` ` is-on-or-after` ` is-between` ` is-earlier-than` ` is-within-the-last` | | `vm` | `is` ` is-not` ` contains` ` does-not-contain` ` starts-with` | ##### Enumerated Properties (vSphere) The following fields have enumerated values: | Field | Acceptable Values | | ------------- | ------------------------------------ | | `power-state` | `poweredOn` `poweredOff` `suspended` | ## HATEOAS This API follows Hypermedia as the Engine of Application State (HATEOAS) principals and is therefore hypermedia friendly. Hyperlinks are returned in the `links` property of any given resource and contain a fully-qualified hyperlink to the corresponding resource. The format of the hypermedia link adheres to both the <a target="_blank" href="http://jsonapi.org">{json:api} v1</a> <a target="_blank" href="http://jsonapi.org/format/#document-links">"Link Object"</a> and <a target="_blank" href="http://json-schema.org/latest/json-schema-hypermedia.html">JSON Hyper-Schema</a> <a target="_blank" href="http://json-schema.org/latest/json-schema-hypermedia.html#rfc.section.5.2">"Link Description Object"</a> formats. For example: ```json "links": [{ "rel": "<relation>", "href": "<href>" ... }] ``` Where appropriate link objects may also contain additional properties than the `rel` and `href` properties, such as `id`, `type`, etc. See the [Root](#tag/Root) resources for the entry points into API discovery.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.