Results for connected-domain

Currently supports connecting to Nominet and running checks on domain names

A universal proxy for external apis.

Models a mycelial network beneath conscious awareness: hyphae connect disparate knowledge domains, nutrients (insights) flow through the network, and fruiting bodies (creative breakthroughs) emerge at the surface.

Enables Vagrant to connect to vSphere VMs via dynamic domain names based on MAC addresses

IP2Location filter plugin for Logstash enables Logstash's users to add geolocation information such as country, state, district, city, latitude, longitude, ZIP code, time zone, ISP, domain name, connection speed, IDD code, area code, weather station code, weather station name, MNC, MCC, mobile brand, elevation, usage type, address type, IAB category, ASN, AS domain, AS usage type and AS CIDR by IP address.

Creates UUID version 5 out of scientific name string. It uses globalnames.org domain for DNS namespace. There is a 1:1 relationship between the string and the corresponding UUID, so it allows globally connect data about a name string originated from independent sources without a need to negotiate identifiers.

Connects Legion to ServiceNow via 60+ REST API domains spanning ITSM, ITOM, ITAM, HR, Security, DevOps, and platform administration

Ser(ve) your web app with HTTPS to any device on your network (mDNS): 1. Use convenient domain names without ports (https://app.local vs http://127.0.0.1:3000); 2. Use mDNS for .local domains, so you can visit them from your phone or any other device connected to the same network; 3. Locally-trusted development certificates (read on filosottile/mkcert how to trust certificates on mobile devices). Use-cases: 1. Simulate production-like subdomains (e.g., blog.example.com, api.example.com); 2. Test cookies scoped to specific domains; 3. Preview multi-tenant routing (e.g., tenant1.example.com, tenant2.example.com); 4. Use third-party APIs that need HTTPS.

# Netchk Simple tool to troubleshoot internet connectivity issues. This tool verifies: - your computer has at least one IP address - you have at least one DNS configured - you can reach the configured nameservers - the nameservers can resolve hosts Finally, some ICMP ping statistics are presented with average durations and error rates. ## Installation ```sh gem install netchk ``` ## Usage Just run `netchk` from your terminal and basic diagnosis will start showing you progress and any error if present. Note: On Linux system, this gem requires `sudo` to perform the ICMP ping operations. On macOS, this is not needed. You also can configure how netchk verifies your connections by configuring a `~/.netchk.yaml` or `~/.netchk.yml` file like below. ```yaml # Settings to test DNS server connectivity. dns: # Path to resolv.conf file to check presence and connectivity of DNS. # Path should be absolute to avoid issues when running netchk # from different directories. resolv.conf: /etc/resolv.conf # Settings to test DNS resolution. resolv: # Path to resolv.conf file to use for testing DNS resolution. # Path should be absolute to avoid issues when running netchk # from different directories. It is advised to be the same # as dns.resolv.conf. resolv.conf: /etc/resolv.conf # The list of domains to test for DNS resolution. domains: - google.com - youtube.com - facebook.com # Settings to test icmp ping. icmp: # A list of hosts to ping with ICMP. It is advised to use # IP addresses instead of domains to rule out any issues with # DNS resolution, which is tested separately. hosts: - 1.1.1.1 - 8.8.8.8 # The number of ping to issue each host. count: 20 # The duration in seconds to wait between each ping. # Setting this value too low might cause timeouts. interval: 0.2 ``` Each value is optional. If one is missing the default value will be used. The file above shows the default values. ## Contributing Bug reports and pull requests are welcome on GitHub at https://github.com/moray95/netchk.

# Overview This guide documents the InsightVM Application Programming Interface (API) Version 3. This API supports the Representation State Transfer (REST) design pattern. Unless noted otherwise this API accepts and produces the `application/json` media type. This API uses Hypermedia as the Engine of Application State (HATEOAS) and is hypermedia friendly. All API connections must be made to the security console using HTTPS. ## Versioning Versioning is specified in the URL and the base path of this API is: `https://<host>:<port>/api/3/`. ## Specification An <a target="_blank" href="https://github.com/OAI/OpenAPI-Specification/blob/master/versions/2.0.md">OpenAPI v2</a> specification (also known as Swagger 2) of this API is available. Tools such as <a target="_blank" href="https://github.com/swagger-api/swagger-codegen">swagger-codegen</a> can be used to generate an API client in the language of your choosing using this specification document. <p class="openapi">Download the specification: <a class="openapi-button" target="_blank" download="" href="/api/3/json"> Download </a></p> ## Authentication Authorization to the API uses HTTP Basic Authorization (see <a target="_blank" href="https://www.ietf.org/rfc/rfc2617.txt">RFC 2617</a> for more information). Requests must supply authorization credentials in the `Authorization` header using a Base64 encoded hash of `"username:password"`. <!-- ReDoc-Inject: <security-definitions> --> ### 2FA This API supports two-factor authentication (2FA) by supplying an authentication token in addition to the Basic Authorization. The token is specified using the `Token` request header. To leverage two-factor authentication, this must be enabled on the console and be configured for the account accessing the API. ## Resources ### Naming Resource names represent nouns and identify the entity being manipulated or accessed. All collection resources are pluralized to indicate to the client they are interacting with a collection of multiple resources of the same type. Singular resource names are used when there exists only one resource available to interact with. The following naming conventions are used by this API: | Type | Case | | --------------------------------------------- | ------------------------ | | Resource names | `lower_snake_case` | | Header, body, and query parameters parameters | `camelCase` | | JSON fields and property names | `camelCase` | #### Collections A collection resource is a parent resource for instance resources, but can itself be retrieved and operated on independently. Collection resources use a pluralized resource name. The resource path for collection resources follow the convention: ``` /api/3/{resource_name} ``` #### Instances An instance resource is a "leaf" level resource that may be retrieved, optionally nested within a collection resource. Instance resources are usually retrievable with opaque identifiers. The resource path for instance resources follows the convention: ``` /api/3/{resource_name}/{instance_id}... ``` ## Verbs The following HTTP operations are supported throughout this API. The general usage of the operation and both its failure and success status codes are outlined below. | Verb | Usage | Success | Failure | | --------- | ------------------------------------------------------------------------------------- | ----------- | -------------------------------------------------------------- | | `GET` | Used to retrieve a resource by identifier, or a collection of resources by type. | `200` | `400`, `401`, `402`, `404`, `405`, `408`, `410`, `415`, `500` | | `POST` | Creates a resource with an application-specified identifier. | `201` | `400`, `401`, `404`, `405`, `408`, `413`, `415`, `500` | | `POST` | Performs a request to queue an asynchronous job. | `202` | `400`, `401`, `405`, `408`, `410`, `413`, `415`, `500` | | `PUT` | Creates a resource with a client-specified identifier. | `200` | `400`, `401`, `403`, `405`, `408`, `410`, `413`, `415`, `500` | | `PUT` | Performs a full update of a resource with a specified identifier. | `201` | `400`, `401`, `403`, `405`, `408`, `410`, `413`, `415`, `500` | | `DELETE` | Deletes a resource by identifier or an entire collection of resources. | `204` | `400`, `401`, `405`, `408`, `410`, `413`, `415`, `500` | | `OPTIONS` | Requests what operations are available on a resource. | `200` | `401`, `404`, `405`, `408`, `500` | ### Common Operations #### OPTIONS All resources respond to the `OPTIONS` request, which allows discoverability of available operations that are supported. The `OPTIONS` response returns the acceptable HTTP operations on that resource within the `Allow` header. The response is always a `200 OK` status. ### Collection Resources Collection resources can support the `GET`, `POST`, `PUT`, and `DELETE` operations. #### GET The `GET` operation invoked on a collection resource indicates a request to retrieve all, or some, of the entities contained within the collection. This also includes the optional capability to filter or search resources during the request. The response from a collection listing is a paginated document. See [hypermedia links](#section/Overview/Paging) for more information. #### POST The `POST` is a non-idempotent operation that allows for the creation of a new resource when the resource identifier is not provided by the system during the creation operation (i.e. the Security Console generates the identifier). The content of the `POST` request is sent in the request body. The response to a successful `POST` request should be a `201 CREATED` with a valid `Location` header field set to the URI that can be used to access to the newly created resource. The `POST` to a collection resource can also be used to interact with asynchronous resources. In this situation, instead of a `201 CREATED` response, the `202 ACCEPTED` response indicates that processing of the request is not fully complete but has been accepted for future processing. This request will respond similarly with a `Location` header with link to the job-oriented asynchronous resource that was created and/or queued. #### PUT The `PUT` is an idempotent operation that either performs a create with user-supplied identity, or a full replace or update of a resource by a known identifier. The response to a `PUT` operation to create an entity is a `201 Created` with a valid `Location` header field set to the URI that can be used to access to the newly created resource. `PUT` on a collection resource replaces all values in the collection. The typical response to a `PUT` operation that updates an entity is hypermedia links, which may link to related resources caused by the side-effects of the changes performed. #### DELETE The `DELETE` is an idempotent operation that physically deletes a resource, or removes an association between resources. The typical response to a `DELETE` operation is hypermedia links, which may link to related resources caused by the side-effects of the changes performed. ### Instance Resources Instance resources can support the `GET`, `PUT`, `POST`, `PATCH` and `DELETE` operations. #### GET Retrieves the details of a specific resource by its identifier. The details retrieved can be controlled through property selection and property views. The content of the resource is returned within the body of the response in the acceptable media type. #### PUT Allows for and idempotent "full update" (complete replacement) on a specific resource. If the resource does not exist, it will be created; if it does exist, it is completely overwritten. Any omitted properties in the request are assumed to be undefined/null. For "partial updates" use `POST` or `PATCH` instead. The content of the `PUT` request is sent in the request body. The identifier of the resource is specified within the URL (not the request body). The response to a successful `PUT` request is a `201 CREATED` to represent the created status, with a valid `Location` header field set to the URI that can be used to access to the newly created (or fully replaced) resource. #### POST Performs a non-idempotent creation of a new resource. The `POST` of an instance resource most commonly occurs with the use of nested resources (e.g. searching on a parent collection resource). The response to a `POST` of an instance resource is typically a `200 OK` if the resource is non-persistent, and a `201 CREATED` if there is a resource created/persisted as a result of the operation. This varies by endpoint. #### PATCH The `PATCH` operation is used to perform a partial update of a resource. `PATCH` is a non-idempotent operation that enforces an atomic mutation of a resource. Only the properties specified in the request are to be overwritten on the resource it is applied to. If a property is missing, it is assumed to not have changed. #### DELETE Permanently removes the individual resource from the system. If the resource is an association between resources, only the association is removed, not the resources themselves. A successful deletion of the resource should return `204 NO CONTENT` with no response body. This operation is not fully idempotent, as follow-up requests to delete a non-existent resource should return a `404 NOT FOUND`. ## Requests Unless otherwise indicated, the default request body media type is `application/json`. ### Headers Commonly used request headers include: | Header | Example | Purpose | | ------------------ | --------------------------------------------- | ---------------------------------------------------------------------------------------------- | | `Accept` | `application/json` | Defines what acceptable content types are allowed by the client. For all types, use `*/*`. | | `Accept-Encoding` | `deflate, gzip` | Allows for the encoding to be specified (such as gzip). | | `Accept-Language` | `en-US` | Indicates to the server the client's locale (defaults `en-US`). | | `Authorization ` | `Basic Base64("username:password")` | Basic authentication | | `Token ` | `123456` | Two-factor authentication token (if enabled) | ### Dates & Times Dates and/or times are specified as strings in the ISO 8601 format(s). The following formats are supported as input: | Value | Format | Notes | | --------------------------- | ------------------------------------------------------ | ----------------------------------------------------- | | Date | YYYY-MM-DD | Defaults to 12 am UTC (if used for a date & time | | Date & time only | YYYY-MM-DD'T'hh:mm:ss[.nnn] | Defaults to UTC | | Date & time in UTC | YYYY-MM-DD'T'hh:mm:ss[.nnn]Z | | | Date & time w/ offset | YYYY-MM-DD'T'hh:mm:ss[.nnn][+&#124;-]hh:mm | | | Date & time w/ zone-offset | YYYY-MM-DD'T'hh:mm:ss[.nnn][+&#124;-]hh:mm[<zone-id>] | | ### Timezones Timezones are specified in the regional zone format, such as `"America/Los_Angeles"`, `"Asia/Tokyo"`, or `"GMT"`. ### Paging Pagination is supported on certain collection resources using a combination of two query parameters, `page` and `size`. As these are control parameters, they are prefixed with the underscore character. The page parameter dictates the zero-based index of the page to retrieve, and the `size` indicates the size of the page. For example, `/resources?page=2&size=10` will return page 3, with 10 records per page, giving results 21-30. The maximum page size for a request is 500. ### Sorting Sorting is supported on paginated resources with the `sort` query parameter(s). The sort query parameter(s) supports identifying a single or multi-property sort with a single or multi-direction output. The format of the parameter is: ``` sort=property[,ASC|DESC]... ``` Therefore, the request `/resources?sort=name,title,DESC` would return the results sorted by the name and title descending, in that order. The sort directions are either ascending `ASC` or descending `DESC`. With single-order sorting, all properties are sorted in the same direction. To sort the results with varying orders by property, multiple sort parameters are passed. For example, the request `/resources?sort=name,ASC&sort=title,DESC` would sort by name ascending and title descending, in that order. ## Responses The following response statuses may be returned by this API. | Status | Meaning | Usage | | ------ | ------------------------ |------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | | `200` | OK | The operation performed without error according to the specification of the request, and no more specific 2xx code is suitable. | | `201` | Created | A create request has been fulfilled and a resource has been created. The resource is available as the URI specified in the response, including the `Location` header. | | `202` | Accepted | An asynchronous task has been accepted, but not guaranteed, to be processed in the future. | | `400` | Bad Request | The request was invalid or cannot be otherwise served. The request is not likely to succeed in the future without modifications. | | `401` | Unauthorized | The user is unauthorized to perform the operation requested, or does not maintain permissions to perform the operation on the resource specified. | | `403` | Forbidden | The resource exists to which the user has access, but the operating requested is not permitted. | | `404` | Not Found | The resource specified could not be located, does not exist, or an unauthenticated client does not have permissions to a resource. | | `405` | Method Not Allowed | The operations may not be performed on the specific resource. Allowed operations are returned and may be performed on the resource. | | `408` | Request Timeout | The client has failed to complete a request in a timely manner and the request has been discarded. | | `413` | Request Entity Too Large | The request being provided is too large for the server to accept processing. | | `415` | Unsupported Media Type | The media type is not supported for the requested resource. | | `500` | Internal Server Error | An internal and unexpected error has occurred on the server at no fault of the client. | ### Security The response statuses 401, 403 and 404 need special consideration for security purposes. As necessary, error statuses and messages may be obscured to strengthen security and prevent information exposure. The following is a guideline for privileged resource response statuses: | Use Case | Access | Resource | Permission | Status | | ------------------------------------------------------------------ | ------------------ |------------------- | ------------ | ------------ | | Unauthenticated access to an unauthenticated resource. | Unauthenticated | Unauthenticated | Yes | `20x` | | Unauthenticated access to an authenticated resource. | Unauthenticated | Authenticated | No | `401` | | Unauthenticated access to an authenticated resource. | Unauthenticated | Non-existent | No | `401` | | Authenticated access to a unauthenticated resource. | Authenticated | Unauthenticated | Yes | `20x` | | Authenticated access to an authenticated, unprivileged resource. | Authenticated | Authenticated | No | `404` | | Authenticated access to an authenticated, privileged resource. | Authenticated | Authenticated | Yes | `20x` | | Authenticated access to an authenticated, non-existent resource | Authenticated | Non-existent | Yes | `404` | ### Headers Commonly used response headers include: | Header | Example | Purpose | | -------------------------- | --------------------------------- | --------------------------------------------------------------- | | `Allow` | `OPTIONS, GET` | Defines the allowable HTTP operations on a resource. | | `Cache-Control` | `no-store, must-revalidate` | Disables caching of resources (as they are all dynamic). | | `Content-Encoding` | `gzip` | The encoding of the response body (if any). | | `Location` | | Refers to the URI of the resource created by a request. | | `Transfer-Encoding` | `chunked` | Specified the encoding used to transform response. | | `Retry-After` | 5000 | Indicates the time to wait before retrying a request. | | `X-Content-Type-Options` | `nosniff` | Disables MIME type sniffing. | | `X-XSS-Protection` | `1; mode=block` | Enables XSS filter protection. | | `X-Frame-Options` | `SAMEORIGIN` | Prevents rendering in a frame from a different origin. | | `X-UA-Compatible` | `IE=edge,chrome=1` | Specifies the browser mode to render in. | ### Format When `application/json` is returned in the response body it is always pretty-printed (indented, human readable output). Additionally, gzip compression/encoding is supported on all responses. #### Dates & Times Dates or times are returned as strings in the ISO 8601 'extended' format. When a date and time is returned (instant) the value is converted to UTC. For example: | Value | Format | Example | | --------------- | ------------------------------ | --------------------- | | Date | `YYYY-MM-DD` | 2017-12-03 | | Date & Time | `YYYY-MM-DD'T'hh:mm:ss[.nnn]Z` | 2017-12-03T10:15:30Z | #### Content In some resources a Content data type is used. This allows for multiple formats of representation to be returned within resource, specifically `"html"` and `"text"`. The `"text"` property returns a flattened representation suitable for output in textual displays. The `"html"` property returns an HTML fragment suitable for display within an HTML element. Note, the HTML returned is not a valid stand-alone HTML document. #### Paging The response to a paginated request follows the format: ```json { resources": [ ... ], "page": { "number" : ..., "size" : ..., "totalResources" : ..., "totalPages" : ... }, "links": [ "first" : { "href" : "..." }, "prev" : { "href" : "..." }, "self" : { "href" : "..." }, "next" : { "href" : "..." }, "last" : { "href" : "..." } ] } ``` The `resources` property is an array of the resources being retrieved from the endpoint, each which should contain at minimum a "self" relation hypermedia link. The `page` property outlines the details of the current page and total possible pages. The object for the page includes the following properties: - number - The page number (zero-based) of the page returned. - size - The size of the pages, which is less than or equal to the maximum page size. - totalResources - The total amount of resources available across all pages. - totalPages - The total amount of pages. The last property of the paged response is the `links` array, which contains all available hypermedia links. For paginated responses, the "self", "next", "previous", "first", and "last" links are returned. The "self" link must always be returned and should contain a link to allow the client to replicate the original request against the collection resource in an identical manner to that in which it was invoked. The "next" and "previous" links are present if either or both there exists a previous or next page, respectively. The "next" and "previous" links have hrefs that allow "natural movement" to the next page, that is all parameters required to move the next page are provided in the link. The "first" and "last" links provide references to the first and last pages respectively. Requests outside the boundaries of the pageable will result in a `404 NOT FOUND`. Paginated requests do not provide a "stateful cursor" to the client, nor does it need to provide a read consistent view. Records in adjacent pages may change while pagination is being traversed, and the total number of pages and resources may change between requests within the same filtered/queries resource collection. #### Property Views The "depth" of the response of a resource can be configured using a "view". All endpoints supports two views that can tune the extent of the information returned in the resource. The supported views are `summary` and `details` (the default). View are specified using a query parameter, in this format: ```bash /<resource>?view={viewName} ``` #### Error Any error responses can provide a response body with a message to the client indicating more information (if applicable) to aid debugging of the error. All 40x and 50x responses will return an error response in the body. The format of the response is as follows: ```json { "status": <statusCode>, "message": <message>, "links" : [ { "rel" : "...", "href" : "..." } ] } ``` The `status` property is the same as the HTTP status returned in the response, to ease client parsing. The message property is a localized message in the request client's locale (if applicable) that articulates the nature of the error. The last property is the `links` property. This may contain additional [hypermedia links](#section/Overview/Authentication) to troubleshoot. #### Search Criteria <a section="section/Responses/SearchCriteria"></a> Multiple resources make use of search criteria to match assets. Search criteria is an array of search filters. Each search filter has a generic format of: ```json { "field": "<field-name>", "operator": "<operator>", ["value": "<value>",] ["lower": "<value>",] ["upper": "<value>"] } ``` Every filter defines two required properties `field` and `operator`. The field is the name of an asset property that is being filtered on. The operator is a type and property-specific operating performed on the filtered property. The valid values for fields and operators are outlined in the table below. Every filter also defines one or more values that are supplied to the operator. The valid values vary by operator and are outlined below. ##### Fields The following table outlines the search criteria fields and the available operators: | Field | Operators | | --------------------------------- | ------------------------------------------------------------------------------------------------------------------------------ | | `alternate-address-type` | `in` | | `container-image` | `is` ` is-not` ` starts-with` ` ends-with` ` contains` ` does-not-contain` ` is-like` ` not-like` | | `container-status` | `is` ` is-not` | | `containers` | `are` | | `criticality-tag` | `is` ` is-not` ` is-greater-than` ` is-less-than` ` is-applied` ` is-not-applied` | | `custom-tag` | `is` ` is-not` ` starts-with` ` ends-with` ` contains` ` does-not-contain` ` is-applied` ` is-not-applied` | | `cve` | `is` ` is-not` ` contains` ` does-not-contain` | | `cvss-access-complexity` | `is` ` is-not` | | `cvss-authentication-required` | `is` ` is-not` | | `cvss-access-vector` | `is` ` is-not` | | `cvss-availability-impact` | `is` ` is-not` | | `cvss-confidentiality-impact` | `is` ` is-not` | | `cvss-integrity-impact` | `is` ` is-not` | | `cvss-v3-confidentiality-impact` | `is` ` is-not` | | `cvss-v3-integrity-impact` | `is` ` is-not` | | `cvss-v3-availability-impact` | `is` ` is-not` | | `cvss-v3-attack-vector` | `is` ` is-not` | | `cvss-v3-attack-complexity` | `is` ` is-not` | | `cvss-v3-user-interaction` | `is` ` is-not` | | `cvss-v3-privileges-required` | `is` ` is-not` | | `host-name` | `is` ` is-not` ` starts-with` ` ends-with` ` contains` ` does-not-contain` ` is-empty` ` is-not-empty` ` is-like` ` not-like` | | `host-type` | `in` ` not-in` | | `ip-address` | `is` ` is-not` ` in-range` ` not-in-range` ` is-like` ` not-like` | | `ip-address-type` | `in` ` not-in` | | `last-scan-date` | `is-on-or-before` ` is-on-or-after` ` is-between` ` is-earlier-than` ` is-within-the-last` | | `location-tag` | `is` ` is-not` ` starts-with` ` ends-with` ` contains` ` does-not-contain` ` is-applied` ` is-not-applied` | | `mobile-device-last-sync-time` | `is-within-the-last` ` is-earlier-than` | | `open-ports` | `is` ` is-not` ` in-range` | | `operating-system` | `contains` ` does-not-contain` ` is-empty` ` is-not-empty` | | `owner-tag` | `is` ` is-not` ` starts-with` ` ends-with` ` contains` ` does-not-contain` ` is-applied` ` is-not-applied` | | `pci-compliance` | `is` | | `risk-score` | `is` ` is-not` ` in-range` ` greater-than` ` less-than` | | `service-name` | `contains` ` does-not-contain` | | `site-id` | `in` ` not-in` | | `software` | `contains` ` does-not-contain` | | `vAsset-cluster` | `is` ` is-not` ` contains` ` does-not-contain` ` starts-with` | | `vAsset-datacenter` | `is` ` is-not` | | `vAsset-host-name` | `is` ` is-not` ` contains` ` does-not-contain` ` starts-with` | | `vAsset-power-state` | `in` ` not-in` | | `vAsset-resource-pool-path` | `contains` ` does-not-contain` | | `vulnerability-assessed` | `is-on-or-before` ` is-on-or-after` ` is-between` ` is-earlier-than` ` is-within-the-last` | | `vulnerability-category` | `is` ` is-not` ` starts-with` ` ends-with` ` contains` ` does-not-contain` | | `vulnerability-cvss-v3-score` | `is` ` is-not` | | `vulnerability-cvss-score` | `is` ` is-not` ` in-range` ` is-greater-than` ` is-less-than` | | `vulnerability-exposures` | `includes` ` does-not-include` | | `vulnerability-title` | `contains` ` does-not-contain` ` is` ` is-not` ` starts-with` ` ends-with` | | `vulnerability-validated-status` | `are` | ##### Enumerated Properties The following fields have enumerated values: | Field | Acceptable Values | | ----------------------------------------- | ------------------------------------------------------------------------------------------------------------- | | `alternate-address-type` | 0=IPv4, 1=IPv6 | | `containers` | 0=present, 1=not present | | `container-status` | `created` `running` `paused` `restarting` `exited` `dead` `unknown` | | `cvss-access-complexity` | <ul><li><code>L</code> = Low</li><li><code>M</code> = Medium</li><li><code>H</code> = High</li></ul> | | `cvss-integrity-impact` | <ul><li><code>N</code> = None</li><li><code>P</code> = Partial</li><li><code>C</code> = Complete</li></ul> | | `cvss-confidentiality-impact` | <ul><li><code>N</code> = None</li><li><code>P</code> = Partial</li><li><code>C</code> = Complete</li></ul> | | `cvss-availability-impact` | <ul><li><code>N</code> = None</li><li><code>P</code> = Partial</li><li><code>C</code> = Complete</li></ul> | | `cvss-access-vector` | <ul><li><code>L</code> = Local</li><li><code>A</code> = Adjacent</li><li><code>N</code> = Network</li></ul> | | `cvss-authentication-required` | <ul><li><code>N</code> = None</li><li><code>S</code> = Single</li><li><code>M</code> = Multiple</li></ul> | | `cvss-v3-confidentiality-impact` | <ul><li><code>L</code> = Local</li><li><code>L</code> = Low</li><li><code>N</code> = None</li><li><code>H</code> = High</li></ul> | | `cvss-v3-integrity-impact` | <ul><li><code>L</code> = Local</li><li><code>L</code> = Low</li><li><code>N</code> = None</li><li><code>H</code> = High</li></ul> | | `cvss-v3-availability-impact` | <ul><li><code>N</code> = None</li><li><code>L</code> = Low</li><li><code>H</code> = High</li></ul> | | `cvss-v3-attack-vector` | <ul><li><code>N</code> = Network</li><li><code>A</code> = Adjacent</li><li><code>L</code> = Local</li><li><code>P</code> = Physical</li></ul> | | `cvss-v3-attack-complexity` | <ul><li><code>L</code> = Low</li><li><code>H</code> = High</li></ul> | | `cvss-v3-user-interaction` | <ul><li><code>N</code> = None</li><li><code>R</code> = Required</li></ul> | | `cvss-v3-privileges-required` | <ul><li><code>N</code> = None</li><li><code>L</code> = Low</li><li><code>H</code> = High</li></ul> | | `host-type` | 0=Unknown, 1=Guest, 2=Hypervisor, 3=Physical, 4=Mobile | | `ip-address-type` | 0=IPv4, 1=IPv6 | | `pci-compliance` | 0=fail, 1=pass | | `vulnerability-validated-status` | 0=present, 1=not present | ##### Operator Properties <a section="section/Responses/SearchCriteria/OperatorProperties"></a> The following table outlines which properties are required for each operator and the appropriate data type(s): | Operator | `value` | `lower` | `upper` | | ----------------------|-----------------------|-----------------------|-----------------------| | `are` | `string` | | | | `contains` | `string` | | | | `does-not-contain` | `string` | | | | `ends with` | `string` | | | | `in` | `Array[ string ]` | | | | `in-range` | | `numeric` | `numeric` | | `includes` | `Array[ string ]` | | | | `is` | `string` | | | | `is-applied` | | | | | `is-between` | | `numeric` | `numeric` | | `is-earlier-than` | `numeric` | | | | `is-empty` | | | | | `is-greater-than` | `numeric` | | | | `is-on-or-after` | `string` (yyyy-MM-dd) | | | | `is-on-or-before` | `string` (yyyy-MM-dd) | | | | `is-not` | `string` | | | | `is-not-applied` | | | | | `is-not-empty` | | | | | `is-within-the-last` | `numeric` | | | | `less-than` | `string` | | | | `like` | `string` | | | | `not-contains` | `string` | | | | `not-in` | `Array[ string ]` | | | | `not-in-range` | | `numeric` | `numeric` | | `not-like` | `string` | | | | `starts-with` | `string` | | | #### Discovery Connection Search Criteria <a section="section/Responses/DiscoverySearchCriteria"></a> Dynamic sites make use of search criteria to match assets from a discovery connection. Search criteria is an array of search filters. Each search filter has a generic format of: ```json { "field": "<field-name>", "operator": "<operator>", ["value": "<value>",] ["lower": "<value>",] ["upper": "<value>"] } ``` Every filter defines two required properties `field` and `operator`. The field is the name of an asset property that is being filtered on. The list of supported fields vary depending on the type of discovery connection configured for the dynamic site (e.g vSphere, ActiveSync, etc.). The operator is a type and property-specific operating performed on the filtered property. The valid values for fields outlined in the tables below and are grouped by the type of connection. Every filter also defines one or more values that are supplied to the operator. See <a href="#section/Responses/SearchCriteria/OperatorProperties">Search Criteria Operator Properties</a> for more information on the valid values for each operator. ##### Fields (ActiveSync) This section documents search criteria information for ActiveSync discovery connections. The discovery connections must be one of the following types: `"activesync-ldap"`, `"activesync-office365"`, or `"activesync-powershell"`. The following table outlines the search criteria fields and the available operators for ActiveSync connections: | Field | Operators | | --------------------------------- | ------------------------------------------------------------- | | `last-sync-time` | `is-within-the-last` ` is-earlier-than` | | `operating-system` | `contains` ` does-not-contain` | | `user` | `is` ` is-not` ` contains` ` does-not-contain` ` starts-with` | ##### Fields (AWS) This section documents search criteria information for AWS discovery connections. The discovery connections must be the type `"aws"`. The following table outlines the search criteria fields and the available operators for AWS connections: | Field | Operators | | ----------------------- | ------------------------------------------------------------- | | `availability-zone` | `contains` ` does-not-contain` | | `guest-os-family` | `contains` ` does-not-contain` | | `instance-id` | `contains` ` does-not-contain` | | `instance-name` | `is` ` is-not` ` contains` ` does-not-contain` ` starts-with` | | `instance-state` | `in` ` not-in` | | `instance-type` | `in` ` not-in` | | `ip-address` | `in-range` ` not-in-range` ` is` ` is-not` | | `region` | `in` ` not-in` | | `vpc-id` | `is` ` is-not` ` contains` ` does-not-contain` ` starts-with` | ##### Fields (DHCP) This section documents search criteria information for DHCP discovery connections. The discovery connections must be the type `"dhcp"`. The following table outlines the search criteria fields and the available operators for DHCP connections: | Field | Operators | | --------------- | ------------------------------------------------------------- | | `host-name` | `is` ` is-not` ` contains` ` does-not-contain` ` starts-with` | | `ip-address` | `in-range` ` not-in-range` ` is` ` is-not` | | `mac-address` | `is` ` is-not` ` contains` ` does-not-contain` ` starts-with` | ##### Fields (Sonar) This section documents search criteria information for Sonar discovery connections. The discovery connections must be the type `"sonar"`. The following table outlines the search criteria fields and the available operators for Sonar connections: | Field | Operators | | ------------------- | -------------------- | | `search-domain` | `contains` ` is` | | `ip-address` | `in-range` ` is` | | `sonar-scan-date` | `is-within-the-last` | ##### Fields (vSphere) This section documents search criteria information for vSphere discovery connections. The discovery connections must be the type `"vsphere"`. The following table outlines the search criteria fields and the available operators for vSphere connections: | Field | Operators | | -------------------- | ------------------------------------------------------------------------------------------ | | `cluster` | `is` ` is-not` ` contains` ` does-not-contain` ` starts-with` | | `data-center` | `is` ` is-not` | | `discovered-time` | `is-on-or-before` ` is-on-or-after` ` is-between` ` is-earlier-than` ` is-within-the-last` | | `guest-os-family` | `contains` ` does-not-contain` | | `host-name` | `is` ` is-not` ` contains` ` does-not-contain` ` starts-with` | | `ip-address` | `in-range` ` not-in-range` ` is` ` is-not` | | `power-state` | `in` ` not-in` | | `resource-pool-path` | `contains` ` does-not-contain` | | `last-time-seen` | `is-on-or-before` ` is-on-or-after` ` is-between` ` is-earlier-than` ` is-within-the-last` | | `vm` | `is` ` is-not` ` contains` ` does-not-contain` ` starts-with` | ##### Enumerated Properties (vSphere) The following fields have enumerated values: | Field | Acceptable Values | | ------------- | ------------------------------------ | | `power-state` | `poweredOn` `poweredOff` `suspended` | ## HATEOAS This API follows Hypermedia as the Engine of Application State (HATEOAS) principals and is therefore hypermedia friendly. Hyperlinks are returned in the `links` property of any given resource and contain a fully-qualified hyperlink to the corresponding resource. The format of the hypermedia link adheres to both the <a target="_blank" href="http://jsonapi.org">{json:api} v1</a> <a target="_blank" href="http://jsonapi.org/format/#document-links">"Link Object"</a> and <a target="_blank" href="http://json-schema.org/latest/json-schema-hypermedia.html">JSON Hyper-Schema</a> <a target="_blank" href="http://json-schema.org/latest/json-schema-hypermedia.html#rfc.section.5.2">"Link Description Object"</a> formats. For example: ```json "links": [{ "rel": "<relation>", "href": "<href>" ... }] ``` Where appropriate link objects may also contain additional properties than the `rel` and `href` properties, such as `id`, `type`, etc. See the [Root](#tag/Root) resources for the entry points into API discovery.

== Terminal UIs, the Ruby Way RatatuiRuby[https://rubygems.org/gems/ratatui_ruby] is a RubyGem built on Ratatui[https://ratatui.rs], a leading TUI library written in Rust[https://rust-lang.org]. You get native performance with the joy of Ruby. gem install ratatui_ruby {rdoc-image:https://ratatui-ruby.dev/hero.gif}[https://www.ratatui-ruby.dev/docs/v0.10/examples/app_cli_rich_moments/README_md.html] === Rich Moments Add a spinner, a progress bar, or an inline menu to your CLI script. No full-screen takeover. Your terminal history stays intact. ==== Inline Viewports Standard TUIs erase themselves on exit. Your carefully formatted CLI output disappears. Users lose their scrollback. <b>Inline viewports</b> solve this. They occupy a fixed number of lines, render rich UI, then leave the output in place when done. Perfect for spinners, menus, progress indicators—any brief moment of richness. require "ratatui_ruby" RatatuiRuby.run(viewport: :inline, height: 1) do |tui| until connected? status = tui.paragraph(text: "\#{spin} Connecting...") tui.draw { |frame| frame.render_widget(status, frame.area) } end end === Build Something Real Full-screen applications with {keyboard and mouse input}[https://www.ratatui-ruby.dev/docs/v0.10/examples/app_all_events/README_md.html]. The managed loop sets up the terminal and restores it on exit, even after crashes. RatatuiRuby.run do |tui| loop do tui.draw do |frame| frame.render_widget( tui.paragraph(text: "Hello, RatatuiRuby!", alignment: :center), frame.area ) end case tui.poll_event in { type: :key, code: "q" } then break else nil end end end ==== Widgets included: [Layout] {Block}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_block/README_md.html], {Center}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_center/README_md.html], {Clear (Popup, Modal)}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_popup/README_md.html], {Layout (Split, Grid)}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_layout_split/README_md.html], {Overlay}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_overlay/README_md.html] [Data] {Bar Chart}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_barchart/README_md.html], {Chart}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_chart/README_md.html], {Gauge}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_gauge/README_md.html], {Line Gauge}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_line_gauge/README_md.html], {Sparkline}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_sparkline/README_md.html], {Table}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_table/README_md.html] [Text] {Cell}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_cell/README_md.html], {List}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_list/README_md.html], {Rich Text (Line, Span)}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_rich_text/README_md.html], {Scrollbar (Scroll)}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_scrollbar/README_md.html], {Tabs}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_tabs/README_md.html] [Graphics] {Calendar}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_calendar/README_md.html], {Canvas}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_canvas/README_md.html], {Map (World Map)}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_map/README_md.html] Need something else? {Build custom widgets}[https://www.ratatui-ruby.dev/docs/v0.10/doc/concepts/custom_widgets_md.html] in Ruby! --- === Testing Built In TUI testing is tedious. You need a headless terminal, event injection, snapshot comparisons, and style assertions. RatatuiRuby bundles all of it. require "ratatui_ruby/test_helper" class TestColorPicker < Minitest::Test include RatatuiRuby::TestHelper def test_swatch_widget with_test_terminal(10, 3) do RatatuiRuby.draw do |frame| frame.render_widget(Swatch.new(:red), frame.area) end assert_cell_style 2, 1, char: "█", bg: :red end end end ==== What's inside: - <b>Headless terminal</b> — No real TTY needed - <b>Snapshots</b> — Plain text and rich (ANSI colors) - <b>Event injection</b> — Keys, mouse, paste, resize - <b>Style assertions</b> — Color, bold, underline at any cell - <b>Test doubles</b> — Mock frames and stub rects - <b>UPDATE_SNAPSHOTS=1</b> — Regenerate baselines in one command --- ==== Inline Menu Example require "ratatui_ruby" # This example renders an inline menu. Arrow keys select, enter confirms. # The menu appears in-place, preserving scrollback. When the user chooses, # the TUI closes and the script continues with the selected value. class RadioMenu CHOICES = ["Production", "Staging", "Development"] # ASCII strings are universally supported. PREFIXES = { active: "●", inactive: "○" } # Some terminals may not support Unicode. CONTROLS = "↑/↓: Select | Enter: Choose | Ctrl+C: Cancel" # Let users know what keys you handle. TITLES = ["Select Environment", # The default title position is top left. { content: CONTROLS, # Multiple titles can save space. position: :bottom, # Titles go on the top or bottom, alignment: :right }] # aligned left, right, or center def call # This method blocks until a choice is made. RatatuiRuby.run(viewport: :inline, height: 5) do |tui| # RatauiRuby.run manages the terminal. @tui = tui # The TUI instance is safe to store. show_menu until chosen? # You can use any loop keyword you like. end # `run` won't return until your block does, RadioMenu::CHOICES[@choice] # so you can use it synchronously. end # Classes like RadioMenu are convenient for private # CLI authors to offer "rich moments." def show_menu = @tui.draw do |frame| # RatatuiRuby gives you low-level access. widget = @tui.paragraph( # But the TUI facade makes it easy to use. text: menu_items, # Text can be spans, lines, or paragraphs. block: @tui.block(borders: :all, titles: TITLES) # Blocks give you boxes and titles, and hold ) # one or more widgets. We only use one here, frame.render_widget(widget, frame.area) # but "area" lets you compose sub-views. end def chosen? # You are responsible for handling input. interaction = @tui.poll_event # Every frame, you receive an event object: return choose if interaction.enter? # Key, Mouse, Resize, Paste, FocusGained, # FocusLost, or None objects. They come with move_by(-1) if interaction.up? # predicates, support pattern matching, and move_by(1) if interaction.down? # can be inspected for properties directly. quit! if interaction.ctrl_c? # Your application must handle every input, false # even interrupts and other exit patterns. end def choose # Here, the loop is about to exit, and the prepare_next_line # block will return. The inline viewport @choice # will be torn down and the terminal will end # be restored, but you are responsible for # positioning the cursor. def prepare_next_line # To ensure the next output is on a new area = @tui.viewport_area # line, query the viewport area and move RatatuiRuby.cursor_position = [0, area.y + area.height] # the cursor to the start of the last line. puts # Then print a newline. end def quit! # All of your familiar Ruby control flow prepare_next_line # keywords work as expected, so we can exit 0 # use them to leave the TUI. end def move_by(line_count) # You are in full control of your UX, so @choice = (@choice + line_count) % CHOICES.size # you can implement any logic you need: end # Would you "wrap around" here, or not? # def menu_items = CHOICES.map.with_index do |choice, i| # Notably, RatatuiRuby has no concept of "\#{prefix_for(i)} \#{choice}" # "menus" or "radio buttons". You are in end # full control, but it also means you must def prefix_for(choice_index) # implement the logic yourself. For larger return PREFIXES[:active] if choice_index == @choice # applications, consider using Rooibos, PREFIXES[:inactive] # an MVU framework built with RatatuiRuby. end # Or, use the upcoming ratatui-ruby-kit, # our object-oriented component library. def initialize = @choice = 0 # However, those are both optional, and end # designed for full-screen Terminal UIs. # RatatuiRuby will always give you the most choice = RadioMenu.new.call # control, and is enough for "rich CLI puts "You chose \#{choice}!" # moments" like this one. --- === Full App Solutions RatatuiRuby renders. For complex applications, add a framework that manages state and composition. ==== Rooibos[https://www.rooibos.run] (Framework) Model-View-Update architecture. Inspired by Elm, Bubble Tea, and React + Redux. Your UI is a pure function of state. - Functional programming with MVU - Commands work off the main thread - Messages, not callbacks, drive updates ==== {Kit}[https://sr.ht/~kerrick/ratatui_ruby/#chapter-3-the-object-path--kit] (Coming Soon) Component-based architecture. Encapsulate state, input handling, and rendering in reusable pieces. - OOP with stateful components - Separate UI state from domain logic - Built-in focus management & click handling Both use the same widget library and rendering engine. Pick the paradigm that fits your brain. --- === Why RatatuiRuby? Ruby deserves world-class terminal user interfaces. TUI developers deserve a world-class language. RatatuiRuby wraps Rust's Ratatui via native extension. The Rust library handles rendering. Your Ruby code handles design. >>> "Text UIs are seeing a renaissance with many new TUI libraries popping up. The Ratatui bindings have proven to be full featured and stable." — {Mike Perham}[https://www.mikeperham.com/], creator of Sidekiq[https://sidekiq.org/] and Faktory[https://contribsys.com/faktory/] ==== Why Rust? Why Ruby? Rust excels at low-level rendering. Ruby excels at expressing domain logic and UI. RatatuiRuby puts each language where it performs best. ==== Versus CharmRuby CharmRuby[https://charm-ruby.dev/] wraps Charm's Go libraries. Both projects give Ruby developers TUI options. [Integration] CharmRuby: Two runtimes, one process. RatatuiRuby: Native extension in Rust. [Runtime] CharmRuby: Go + Ruby (competing). RatatuiRuby: Ruby (Rust has no runtime). [Memory] CharmRuby: Two uncoordinated GCs. RatatuiRuby: One Garbage Collector. [Style] CharmRuby: The Elm Architecture (TEA). RatatuiRuby: TEA, OOP, or Imperative. --- === Links [Get Started] {Quickstart}[https://www.ratatui-ruby.dev/docs/v0.10/doc/getting_started/quickstart_md.html], {Examples}[https://www.ratatui-ruby.dev/docs/v0.10/examples/app_cli_rich_moments/README_md.html], {API Reference}[https://www.ratatui-ruby.dev/docs/v0.10/], {Guides}[https://www.ratatui-ruby.dev/docs/v0.10/doc/index_md.html] [Ecosystem] Rooibos[https://www.rooibos.run], {Kit}[https://sr.ht/~kerrick/ratatui_ruby/#chapter-3-the-object-path--kit] (Planned), {Framework}[https://sr.ht/~kerrick/ratatui_ruby/#chapter-5-the-framework] (Planned), {UI Widgets}[https://sr.ht/~kerrick/ratatui_ruby/#chapter-6-licensing] (Planned) [Community] {Forum}[https://forum.setdef.com/c/ratatui-ruby/6], {Announcements}[https://forum.setdef.com/tags/c/ratatui-ruby/6/announcement], {Discussion}[https://forum.setdef.com/tags/c/ratatui-ruby/6/discussion], {Bug Tracker}[https://forum.setdef.com/tags/c/ratatui-ruby/6/bug] [Contribute] {Contributing Guide}[https://man.sr.ht/~kerrick/ratatui_ruby/contributing.md], {Code of Conduct}[https://man.sr.ht/~kerrick/ratatui_ruby/code_of_conduct.md], {Project History}[https://man.sr.ht/~kerrick/ratatui_ruby/history/index.md], {Pull Requests}[https://forum.setdef.com/tags/c/ratatui-ruby/6/patch] --- [Website] https://www.ratatui-ruby.dev [Source] https://github.com/setdef/RatatuiRuby [RubyGems] https://rubygems.org/gems/ratatui_ruby [Upstream] https://ratatui.rs [Build Status] https://builds.sr.ht/~kerrick/ratatui_ruby © 2026 Kerrick Long · Library: LGPL-3.0-or-later · Website: CC-BY-NC-ND-4.0 · Snippets: MIT-0

# foundationallib <h2>Finally, a cross-platform, portable, well-designed, secure, robust, maximally-efficient C foundational library &mdash; Making Engineering And Computing Fast, Secure, Responsive And Easy.</h2> <br> <h2><i>Library Uses - What It Does, What It Is, And What It Is A Solution For</i></h2> <ul class="features-list"> <li><strong>Enables better Engineering Solutions and Security broadly and foundationally where Software Creation or Development or Script Creation is concerned - whether this be on a local, business, governmental or international basis, and makes things easier - and Computing in General.</strong> Don't Reinvent the Wheel - Use Good Wheels - Be Safe And Secure.</li> <br> <li><strong>Enables a free-flowing dynamic computer usage that you need, deserve and should have, simply because you have a computer. With full speed and with robustness. You deserve to be able to use your computer wholly and fully, with proper and fast operations.</strong></li> <br><li><strong>Enables flexibility and power - makes C accessible to the masses (and faster and more secure) with easy usage and strives to bring people up, not degrade the character or actions of people.</strong> This is a fundamental and unequivocal philosophy difference between this library and many subsections of Software Engineering and the mainstream engineering establishment. For instance, in Python, you cannot read a file easily &ndash; you have to read it line-by-line or open a file, read the lines, then close it. With this library, you can efficiently read 10,000 files in one function call. This library gives power. Any common operation, there ought to be a powerful function for.<br><br>We should not bitch around with assembly when we don't want to; we should also have full speed. Some old "solutions" deliver neither, then culturally degrade programmers because their tools are bad - actually, it just degrades programmers, and gives them bad tools. COBOL is an example ...<br><br>Human technology is about empowerment &ndash; people must fight for it to be empowerment, we don't have time to have AI systems kill us because we want to have bad tools and be weak. We must fight.</li> </ul> <br> <ul> <h2><i>About Foundationallib</i></h2> <li>→<strong>Cross platform</strong> - works perfectly in embedded, server, desktop, and all platforms - tested for Windows and UNIX - 64-bit and 32-bit, includes a 3-aspect test suite, with more to come.</li> <li>→<strong>Bug free. Reliable. Dependable. Secure. Tested well.</strong></li> <li>→<strong>Zero Overhead</strong> - Only 1 byte due to the power of the error handling, can be configured will full power.</li> <li>→<strong>Static Inline Functions if you want them</strong> (optional) - Eliminating function call overhead to 0 if you wish, for improved performance.</li> <li>→<strong>Custom allocators</strong> - if you want it.</li> <li>→<strong>Custom error handling</strong> - if you want it.</li> <li>→<strong>Safe functions</strong> warn the programmer about NULL values and unused return values. Can be configured to not compile if not Secure. Optional null-check macros in every library function. Does not use any of <code>"gets", "fgets", "strcpy", "strcat", "sprintf", "vsprintf", "scanf", "fscanf", "system", "chown", "chmod", "chgrp", "alloca", "execl", "execle", "execlp", "execv", "execve", "execvp", "bcopy", "bzero"</code>. You can configure it to never use any unsafe functions.</li> <li>→<strong>Portable</strong> - works on all platforms, using platform specific features (using #ifdefs) to make functions better and faster.</li> <li>→<strong>Multithreading support</strong> (optional), with list_comprehension_multithreaded (accepts any number of threads, works in parallel using portable C11 threads)</li> <li>→<strong>Networking support</strong> (optional), using libcurl - making it extremely easy to download websites and arrays of websites - features other languages do not have.</li> <li>→Very good and thorough <strong>Error Handling</strong> and <strong>allocation overflow</strong> checking (good for <strong>Security and Robustness</strong>) in the functions. Allows the programmer to dynamically choose to catch all errors in the functions with a handler (default or custom), or to ignore them. No need to ALWAYS say "if (.....) if you don't want to. Can be changed at runtime.</li> <li>→<strong>Public Domain</strong> so you make the code how you want. (No need to "propitiate" to some "god" of some library).</li> <li>→<strong>Minimal abstractions or indirection of any kind or needless slow things that complicate things</strong> - macros, namespace collision, typedefs, structs, object-orientation messes, slow compilation times, bloat, etc., etc.</li> <li>→<strong>No namespace pollution</strong> - you can generate your <span style=font-style:normal;><b>own version</b></span> with any prefix you like!</li> <li>→<strong>Relies <span style=font-style:normal;>minimally</span> on C libraries - it can be fully decoupled from LIB C and can be statically linked.</strong></li> <li>→<span style=font-style:normal;><b>Very small</b></span> - 13K Lines of Code (including Doxygen comments and following of Best Practices)</li> <li>→<strong>No Linkage Issues or dependency hell</strong></li> <li>→<strong>Thorough and clear documentation</strong>, with examples of usage.</li> <li>→<strong>No licensing restrictions whatsoever - use it for your engineering project, your startup, your Fortune 500 company, your personal project, your throw-away script, your government.</strong></li> <li>→<strong>Makes C like Python or Perl or Ruby in many ways - or more easy</strong></li> <li>→<strong>Easy Straightforward Transpilation Support</strong> - to make current code, much faster - all without any bloat (See transpile_slow_scripting_into_c.rb). <li><h4>In many cases, there is now a direct mapping of functions from other languages into optimized C. See the example script in this repository. This makes optimizing your Python / Perl / Ruby / PHP etc. script very easy, either manually or through the use of AI.</h4></li> </ul> </p> </div> <div class=pane style='border: 0;border-right: 1px dotted rgb(200, 200, 200); background-color: rgb(255, 255, 190);'> <div class="library-details"><h2 style=color:green;><i>Foundationallib Features</i></h2> <p class=feature> <strong>Functional Programming Features</strong> - <code>map, reduce, filter,</code> List Comprehensions in C and much more!</p> <p class=feature><strong>Expands C's Primitives for easy manipulation of data types</strong> such as Arrays, Strings, <code>Dict</code>, <code>Set</code>, <code>FrozenDict</code>, <code>FrozenSet</code> - <strong>and enables easy manipulation, modification, alteration, comparison, sorting, counting, IO (printing) and duplication of these at a very comfortable level</strong> - something very, very rare in C or C++, <i>all without any overhead.</i></p> <p class=feature><strong>More comfortable IO</strong> - read and write entire files with ease, and convert complex types into strings or print them on the screen with ease. </p> <p class=feature><strong>A powerful general purpose Foundational Library</strong> - <i>which has anything and everything you need</i> - from <code>replace_all()</code> to <code>replace_memory()</code> to <code>find_last_of()</code> to to <code>list_comprehension()</code> to <code>shellescape()</code> to <code>read_file_into_string()</code> to <code>string_to_json()</code> to <code>string_to_uppercase()</code> to <code>to_title_case()</code> to <code>read_file_into_array()</code> to <code>read_files_into_array()</code> to <code>map()</code> to <code>reduce()</code> to <code>filter()</code> to <code>list_comprehension_multithreaded()</code> to <code>frozen_dict_new_instance()</code> to <code>backticks()</code> - everything you would want to make quick and optimally efficient C programs, this has it.</p> <div style='height: 1px; border: 0;border-bottom: 1px dashed rgb(200, 200, 200);'></div> <p class=performance><span>Helps to make programs hundreds of times faster than other languages with similar ease of creation.</span> <hr> <p class=feature><strong>Easily take advantage of CPU cores with list_comprehension_multithreaded()</strong>.<br><br>You can specify the number of threads, the transform and the filter functions, and this will transform your data - all in parallel. Don't have a multithreaded environment? Then disable it (set the flag).</p> <hr> <h3>You don't want to be reinventing the wheel and hoping that your memory allocation is secure enough - and then failing. <strong>Security Is Paramount.</strong></h3> <h3>You don't want to be waiting <span style='color:rgb(240, 0, 0);'>a day</span> for an operation to complete when it could take <span style='color:rgb(30, 30, 255);'>less than an hour</span>.</h3> <br><p>This library is founded on very strong and unequivocal goals and philosophy. In fact, I have written many articles about the foundation of this library and more relevantly the broader context. See the Articles folder - for some of the foundation of this library.</p> <br><p>This library is an ideal and a dream - not just a Software Library. As such, I would highly suggest that you support me in this mission. Even if it's different from the status quo. Are you a Rust or Zig fan? Then make a Rust or Zig version of this ideal. Let's go. Give me an email.</p> </div> </div> <br> No Copyright - Public Domain - 2023, Gregory Cohen <gregorycohennew@gmail.com> DONATION REQUEST: If this free software has helped you and you find it valuable, please consider making a donation to support the ongoing development and maintenance of this project. Your contribution helps ensure the availability of this library to the community and encourages further improvements. Donations can be made at: https://www.paypal.com/paypalme/cfoundationallib Note: The best way to contact me is through email, not social media. Please feel very free to email me if you want to express feedback, suggest an improvement, desire to collaborate on this free and open source project, want to support me, or want to create something great. Complacency and obstructionism and whining are not tolerated. I desire to make this library the best theoretically possible, so please, let us connect. <h1>This code is in the public domain, fully. You can do whatever you want with it. See docs.html for API reference.  </h1> <h1>Here's some examples of some things you can do easily with Foundationallib.<br><br> <h3>Use it for scripting purposes...</h3> </h1>  <h1>Take control of the Web - in C.<br><br></h1> 

No description provided.