Results for default-shell

tabcast is a command that will take a podcast feed and format it's data in a more shell-friendly format, by default into a tab-delimited list. It's powered by the Liquid templating enging to make it very flexible.

Lightning is a commandline framework that lets users wrap commands with shell functions that are able to refer to any filesystem path by its basename. To achieve this, a group of paths to be translated are defined with shell globs. These shell globs, known as a lightning _bolt_, are then applied to commands to produce functions. In addition to translating basenames to full paths, lightning _functions_ can autocomplete these basenames, resolve conflicts if they have the same name, leave any non-basename arguments untouched, and autocomplete directories above and below a basename. To make bolts shareable between users and functions easier to create, lightning has _generators_. A _generator_ generates filesystem-specific globs for a bolt. Lightning comes with some default generators. Users can make their own generators with generator plugins placed under ~/.lightning/generators/.

[patir](http://patir.rubyforge.org) provides code to enable project automation tasks: * A logging format for ruby's built-in Logger * A command abstraction with a platform independent implementation for running shell commands and ruby code * Command sequences using the same command abstraction as single commands. * Configuration format for configuration files written in ruby. ## Why? We've been using the same things again and again and can't be bothered to code it anew every time. The command abstraction has been used the most, the Logger defaults and formatting the least.

Remote syslog appender for Logging

Sometimes you mess your Rails application Unix permissions and get some annoying errors with git. This gem runs a simple shell script to fix that. Granting 755 permissions to folders and 644 to files, it also ensures that some special files inside the 'bin/' will recive special 755 permissions (bundle, rails, rake and spring) which is pretty much the Rails default. Works with all versions of Ruby on Rails; After install run 'rails-fix-permissions' on terminal inside the application folder to fix. Note that in some cases you may need to run it as superuser with 'sudo'.

Most existing gems that address command execution provide a limited interface or lack notable features. In contast, Exek seeks to provide comprehensive support for all of a program's exec needs with one thoughtfully-designed library. Intended features: - A "Command" class that encapsulates argv, env, and IO options, and process state. - Easy-to-use high level interfaces with sensible defaults for running commands to completion. - Comprehensive support for low-level concerns like piping, PTYs, and file descriptor magic. - Utilities for manipulating `sh` script strings, idiomatically building argument arrays, and generating reusable interaces for common system commands. - Tracing and introspection facilities for logging and latency analysis. - Safety: does not monkeypatch external modules, encourage mixins or use eval. Attempts to guide developers away from unsafe practices like shell scripts and shell injection.

SpreePiwik ========== Adds piwik tracking with Ecommerce tracking Status ------ [](https://travis-ci.org/berkes/spree_piwik) [](https://codeclimate.com/github/berkes/spree_piwik) Installation ------------ Add spree_piwik to your Gemfile: ```ruby gem 'spree_piwik' ``` Bundle your dependencies and run the installation generator: ```shell bundle bundle exec rails g spree_piwik:install ``` Add your Piwik URL and site-id to the `config/initializers/spree_piwik.rb` For example: ```ruby Spree::Piwik::Config[:piwik_url] = "piwik.example.com" Spree::Piwik::Config[:piwik_id] = 1337 ``` Will use http(s)://piwik.example.com/ as url for your Piwik. And track stats for the site that has the id 1337 in Piwik. Screenshot ---------- . Testing ------- First bundle your dependencies, then run `rake`. `rake` will default to building the dummy app if it does not exist, then it will run specs. The dummy app can be regenerated by using `rake test_app`. ```shell bundle bundle exec rake ``` When testing your applications integration with this extension you may use it's factories. Simply add this require statement to your spec_helper: License ------- SpreePiwik is released under the [New BSD License](https://github.com/spree/spree/blob/master/license.md) similar to Spree.

# SecureDataBag / Knife Secure Bag Knife Secure Bag provides a consistent interface to DataBagItem, EncryptedDataBagItem as well as the custom created SecureDataBagItem while also providing a few extra handy features to help in your DataBag workflows. SecureDataBagItem, can not only manage your existing DataBagItems and EncryptedDataBagItems, but it also provides you with a DataBag type which enables you to selectively encrypt only some of the fields in your DataBag thus allowing you to be able to search for the remaining fields. ## Installation To build and install the plugin add it your Gemfile or run: ```shell gem install secure_data_bag ``` ## Configuration #### Knife Secure Bag Defaults for the Knife command may be provided in your _knife.rb_ file. ```ruby knife[:secure_data_bag][:encrypted_keys] = %w( password ssh_keys ssh_ids public_keys private_keys keys secret ) knife[:secure_data_bag][:secret_file] = "#{local_dir}/secret.pem" knife[:secure_data_bag][:export_root] = "#{kitchen_dir}/data_bags" knife[:secure_data_bag][:export_on_upload] = true knife[:secure_data_bag][:defaults][:secrets][:export_format] = 'plain' ``` To break this up: `knife[:secure_data_bag][:encrypted_keys] = []` When Knife Secure Bag encrypts a hash with an _encryption format_ of *nested*, it will recursively walk through the hash from the bottom up and encrypt any key found within this array. `knife[:secure_data_bag][:secret_file]` When encryption is required, the shared secret found at this location will be loaded. `knife[:secure_data_bag][:export_root]` When exporting a data\_bag\_item, files will be created in below this root directory. Typically this would be the data\_bag folder located within your kitchen. `knife[:secure_data_bag][:export_on_upload]` When a data\_bag\_item is edited using `knife secure bag edit`, it may be automatically exported to the _export\_root_. `knife[:secure_data_bag][:defaults][:secrets][:export_format]` The configuration file additionally supports the _defaults_ hash which provides default values for all _command line arguments_ that one might use. Of all of them only the _export\_format_ key is likely to be of much use. ## Examples #### Chef cookbook recipe ```ruby metadata = {} # Define the keys we wish to encrypt metadata[:encrypted_keys] = %w(encoded) # Optionally load a specific shared secret. Otherwise, the global # encrypted\_data\_bag\_secret will be automatically used. secret_key = SecureDataBagItem.load_key("/path/to/secret") # Create a hash of data to use as an exampe raw_data = { id: "item", data_bag: "data_bag", encoded: "my string", unencoded: "other string" } # Instantiate a SecureDataBagItem from a hash item = SecureDataBagItem.from_hash(data, metadata) # Or more explicitely item = SecureDataBagItem.from_hash(data, encrypted_keys: %w(encoded)) # Or load from server item = SecureDataBagItem.load("data_bag", "item") # Print the un-encrypted raw data pp item.raw_data # Print the un-encrypted `encoded` key pp item['encoded'] # Print the encrypted hash as a data_bag_item hash pp item.to_hash =begin { id: "item", data_bag: "data_bag", encoded: { encrypted_data: "encoded", cipher: aes-256-cbc, iv: 13453453dkgfefg== version: 1 } unencoded: "other string", } =end ``` ## Usage #### Knife commands Print an DataBagItem, EncryptedDataBagItem or SecureDataBagItem, auto-detecting the encryption method used as plain text. ```shell knife secure bag show -F js secrets secret_item ``` Print an DataBagItem, EncryptedDataBagItem or SecureDataBagItem, auto-detecting the encryption method used as a SecureDataBagItem in encrypted format. ```shell knife secure bag show -F js secrets secret_item --enc-format nested ``` Edit an EncryptedDataBagItem, preserve it's encryption type, and export a copy to the _data\_bag_ folder in your kitchen. ```shell knife secure bag edit secrets secret_item --export ``` ## Knife SubCommands Most of the SubCommands support the following command-line options: `--enc-format [plain,encrypted,nested]` Ensure that, when displaying or uploading the data\_bag\_item, we forcibly encrypt the data\_bag\_item using the specified format instead of preserving the existing format. In this case: - plain: refers to a DataBagItem - encrypted: refers to an EnrytpedDataBagItem - nested: refers to a SecureDataBagItem `--dec-format [plain,encrypted,nested]` Attempt to decrypt the data\_bag\_item using the given format rather than the auto-detected one. The only real reason to use this is when you wish to specifically select _plain_ as the format so as to not decrypt the item. `--enc-keys key1,key2,key3` Provide a comma delimited list of hash keys which should be encrypted when encrypting the data\_bag\_item. This list will be concatenated with any key names listed in the configuration file or which were previously encrypted. `--export` Export the data\_bag\_item to json file in either of _export-format_ or _enc-format_. `--export-format` Overrides the encryption format only for the _export_ feature. `--export-root` Root directly under which a folder should exist for each _data_bag_ into which to export _data_bag_items_ as json files. When displaying the content of the _data\_bag\_item_, an additional key of *_secure_metadata* will be added to the output which contains gem specific metadata such as the encryption formats and any encrypted keys found. This key will _not_ be saved with the item, however it may be manipulated to alter the behavior of the _edit_ or _export_ commands. #### knife secure bag show DATA_BAG ITEM This command functions just like `knife data bag show` and is used to print out the content of either a DataBagItem, EncryptedDataBagItem or SecureDataBagItem. By default, it will auto-detect the Item type, and print it's unencrypted version to the terminal. This behavior, however, may be altered using the previously mentioned command line options. #### knife secure bag open PATH This commands functions much like `knife secure bag show`, however it is designed to load a _data\_bag\_item_ from disk as opposed to loading it from Chef server. This may be of use when view the content of an exported encrypted file. #### knife secure bag edit DATA_BAG DATA_BAG_ITEM This command functions just like `knife data bag edit` and is used to edit either a DataBagItem, EncryptedDataBagItem or a SecureDataBagItem. It supports all of the same options as `knife secure bag show`. #### knife secure bag from file DATA_BAG PATH This command functions just like `knife data bag from file` and is used to upload either a DataBagItem, EncryptedDataBagItem or a SecureDataBagItem. It supports all of the same options as `knife secure bag show`. ## Recipe DSL The gem additionally provides a few Recipe DSL methods which may be useful. ```ruby load_secure_item = secure_data_bag_item( data_bag_name, data_bag_item, cache: false ) load_plain_item = data_bag_item(data_bag_name, data_bag_item) convert_plain_to_secure = secure_data_bag_item!(load_plain_item) ```

# Noty A bookmarks and snippets manager, stores bookmarks as YAML files and nippets as plain text, utilizes "Ag silver searcher" fast search to search your files when you need to open or copy a snippet, that makes its searching capabilities so enourmouse as it's inherited from AG. Noty is smart, so it react depending on your input, so provide URL and it'll create a bookmark, provide some text and it will search for it in all bookmarks and snippets, if it didn't find any files it will prompt you to create a snippet. Some common usages could be, bookmarking URL, save snippet of text you liked, save some canned responses and quickly copy it when needed. ## Installation ```bash $ gem install noty ``` ## Requirements 1. ag : silver searcher https://github.com/ggreer/the_silver_searcher ### For Linux: 1. xsel : could be found on most distros official repositories 2. xdg-open : should be installed with most opendesktop compatible desktop environments ## Environment by default Noty saves your files in `~/.notes` if you want to change that path, define an Environment variable in your shell init file `.bashrc` or `.zshrc` ```bash export NOTES_PATH=/path/to/your/notes/dir ``` ## Usage Snippets and bookmarks manager. **Usage:** ```bash noty inputs ``` **Input types:** 1. **url:** e.g "http://www.example.com", add URL as a bookmark file 2. **keyword:** search bookmarks and perform action on it, a single word of multiple words or regex, it is passed to "ag silver searcher" 3. **snippet text:** any multiword text, it will search first if no files contain this text you'll be asked if you want to create a snippet for it ## Examples Add a bookmark ```bash noty https://www.youtube.com ``` Search for bookmark ```bash noty youtube ``` Add a snippet text ```bash noty this is a long text that I need to save in my stash ``` Search for a snippet (same as searching for bookmarks) ```bash noty need ``` ## Contributing Bug reports and pull requests are welcome on GitHub at https://github.com/blazeeboy/noty. ## License The gem is available as open source under the terms of the [MIT License](http://opensource.org/licenses/MIT).

= Simple task organizer syctask can be used to create, plan, prioritize and schedule tasks. ==Install The application can be installed with $ gem install syc-task == Usage syctask provides basic task organizer functions as create, update, list and complete a task. Additional functions are to plan tasks you want to accomplish today. If you are not sure in which sequence to conduct the task you can prioritize them with a pair wise comparisson. You can time tasks with start and stop and you can finally extract tasks from a minutes of meetings file. The schedule task command will print a graphical timeline of the working day assigning the planned tasks to the timeline. Busy times are marked red. Meetings are listed with associated tasks that are assigned to the meetings. With the statistics command you can print statistical evaluation of tasks duration and count. ===Create tasks with new Create a new task in the default task directory ~/.tasks $ syctask new "My first task" Provide a description $ syctask new "My first task" --description "Explanation of my first task" Schedule a task with a follow-up and due date $ syctask new "My first task" --follow-up "2013-02-25" --due "2013-03-11" Set a proirity for a task $ syctask new "My first task" --prio 3 Prompt for task input $ syctask new will prompt for task titles. Ctrl-D will end input. Except for --description you can also provide short forms for the options. ===Create tasks by scanning from files When writing minutes of meetings tasks that should be followed up in syctask can be annotated so they will be recognized by the scan command. The following structure shows how to annotade tasks Some text before @task; title;description;follow_up;due_date,prio Schedule meeting;Invite all developers;2016-09-12;2016-10-12;1 Write letter;Practice writing letters;;;3 Some text after The above annotation will only scan the next task because of the singular 'task' where the task values are separated with ';'. The line after the annotation '@task' lists the sequence of the fields of the task. It is also possible to list the tasks in a table, e.g. markdown Some text before @tasks| title |description |follow_up |due_date |prio ----------------|--------------------------|----------|----------|---- Schedule meeting|Invite all developers |2016-09-12|2016-10-12|1 Write letter |Practice writing letters | | |3 Some text after Call partner |Ask for project's progress|2016-09-14| |1 Even more text The example above scans all tasks due to the plural 'tasks'. It also scans all tasks that are separated with non-task text and occur after the annotation and confirm to the field structure. Lines that start with '-' will be ignored. So if you want to skip only a few tasks within a task list prepend them with '-'. If you have tasks with different fields then you have to add another annotation with the new field structure. Possible fields are title - the title of the task - mandatory field! description - the description of the task follow_up - the follow-up date of the task in the form yyyy-mm-dd due_date - the due-date of the task in the form yyyy-mm-dd prio - the priority of the task tags - tags the task is annotated with note - a note for the task Note: follow_up and due_date can also be written as Follow-up and Due-Date. Also case is ignored. As inidcated in the list the title column is mandatory. Without the title column scan will raise an error during a scan. Fields that are not part of the above list will be ignored. # | Title | Who - | ------------------------------------ | --- 1 | Schedule meeting with all developers | Me 2 | Write letter to practice writing | You In the table only the column Title will be scanned. The '#' and 'Who' column will be ignored during scan. This table is also a table for a minimum scan structure. You need at least to provide a title column so the scan function will recognize the table as a task list. Scanning tasks from files $ syctask scan 2016-09-10-mom.md 2016-09-09-mom.md ===Plan tasks The plan command will print tasks and prompts whether to (a)dd or (s)kip the task. If (q)uit is selected the tasks already added will be add to the today's task list. If (c)omplete is selected the complete task will be printed and the user will be prompted again for adding the task. Invoke plan without filter $ syctask plan 1 - My first task (a)dd, (c)omplete, (s)kip, (q)uit? a Duration (1 = 15 minutes, return 30 minutes): 3 --> 1 task(s) planned Invoke plan with a filter $ syctask plan --id "1,3,5,8" 1 - My first task (a)dd, (c)omplete, (s)kip, (q)uit? Move tasks to another days plan $ syctask plan today --move tomorrow --id 3,5 This will move the tasks with ID 3 and 5 from the today's plan to the tomorrow's plan. The duration will be set to the remaining processing time but at least to 30 minutes. ===Prioritize tasks Planned tasks can be prioritized in a pair wise comparisson. So each task is compared to all other tasks. The task with the highest priority will bubble on top followed by the task with the next highest priority and so on. $ syctask prio 1: My first task 2: My second task Task 1 has (h)igher or (l)ower priority, or (q)uit: h 1: My first task 2: My third task Task 1 has (h)igher or (l)ower priority, or (q)uit: l 1: My third task 2: My fourth task Task 1 has (h)igher or (l)ower priority, or (q)uit: h ... syctask schedule will then print tasks as follows Tasks ----- 0: 10 - My fourth task 1: 7 - My third task 2: 3 - My first task 3: 9 - My second task ... Instead of conducting pairwise comparisson the order of the tasks in the plan can be specified with the -o flag $ syctask plan -o 7,3,10,9 The plan or schedule command will print the tasks in the specified order Tasks ----- 0: 7 - My third task 1: 3 - My first task 2: 10 - My fourth task 3: 9 - My second task If only a part of the tasks is provided the rest of the tasks is appended to the end of the task plan. If you specify a position flag the prioritized tasks are added at the provided position. $ syctask plan -o 7,9 -p 2 Tasks ----- 0: 3 - My first task 1: 10 - My fourth task 2: 7 - My third task 3: 9 - My second task ===Create schedule The schedule command will print a graphical schedule with assigning the tasks selected with plan. When schedule command is invoked the planned tasks are added at or after the current time within the time schedule. Tasks that are done and scheduled in the future are not shown. Tasks done and in the past are shown with the actual processing time. The day starts at 00:00 and ends at 23:59. So 24:00 should be 00:00. Create a schedule with working time from 8a.m. to 6p.m. and meetings between 9a.m. and 9.30a.m. and 1p.m. and 2.45p.m. $ syctask schedule -w "8:00-18:00" -b "9:00-9:30,13:00-14:45" Add titles to the meetings $ syctask schedule -m "Project status,Management meeting" The output will be Meetings -------- A - Project status B - Management meeting A B xxx-///-|---|---|---///////-|---|---|---| 8 9 10 11 12 13 14 15 16 17 18 1 Tasks ----- 0 - 1: My first task Adding a task to a meeting $ syctask schedule -a "A:0" will print Meetings -------- A - Project status 1 - My first task B - Management meeting A B ----///-|---|---|---///////-|---|---|---| 8 9 10 11 12 13 14 15 16 17 18 Tasks ----- 0: 1 - My first task A task that is re-scheduled with $ syctask update 1 -f tomorrow will be shown as done (green) in the schedule and instead of separator - it shows ~. Tasks ---- 0: 1 ~ My first task A started task will be indicated by * $ syctask start 1 $ syctask sche Tasks ----- 0: 1 * My first task ===List tasks List tasks that are not marked as done in short form $ syctask list List all tasks in long form $ syctask list --all --complete Search tasks that match a pattern $ syctask list --id "<10" --follow_up ">2013-02-25" --title "My \w task" ===Inspect tasks Lists each unplanned task and allows to edit, delete, mark as done or plan for today or another day $ syctask inspect 0016 Create command for inspection (e)dit, (d)one, de(l)ete, (p)lan, da(t)e, (c)omplete, (s)kip, (b)ack, (q)uit ===Edit task Edit a task with ID 10 in vi $ syctask edit 10 ===Update tasks Except for title and id all values can be updated. Note and tags are not overridden rather supplemented with the update value. Update task with ID 1 and provide some informative note $ syctask update 1 --note "Some explanation about the progress on the task" ===Complete tasks Complete the task with ID 1 and provide a final note $ syctask done 1 --note "Finalize my first task" ===Delete tasks Delete tasks with ID 1,3 and 5 from the default task directory $ syctask delete --id 1,3,5 Delete tasks with ID 8 and 12 from the planned tasks of today. The tasks are only removed from the planned tasks and not physically deleted. $ syctask delete --plan today --id 8,12 ===Settings The settings command allows to define default values for task directory and to create general purpose tasks that can be used for tracking and later statistical evaluation. Create general purpose tasks for phone and talk $ syctask setting --general PHONE,TALK List all settings $ syctask setting --list ===Info Info searches for the location of a task and lists all task directories Search for task with id 102 $ syctask info --id 102 List all task directories $ syctask info --taskdir ===Statistics Shows statistics for work and meeting times as well as for task processing Evaluate the complete log file $ syctask statistics Evaluate work times, meetings and tasks between 2013-01-01 and 2013-04-14 $ syctask statistics 2013-01-01 2013-04-14 Evaluate yesterday and today $ syctask statistics yesterday today ===Task directory and project directory The global options --taskdir and --project determine where the command finds or creates the tasks. The default task directory is ~/.tasks, so if no task directory is specified all commands obtain tasks from or create tasks in ~/.tasks. If a project is specified the tasks will be saved to or obtained from the task directories subdirectory specified with the --project flag. --taskdir --project Tasks in - - default_task_dir x - task_dir - x default_task_dir/project x x task_dir/project In the table the relation of commands to --taskdir and --project are listed. Command --taskdir --project Comment delete x x deletes the tasks in taskdir/project done x x marks tasks in taskdir/project as done help - - inspect x x lists task to edit, done, delete, plan list x x lists tasks in taskdir/project new x x creates tasks in taskdir/project plan x x retrieves tasks to plan from taskdir/projekt prio - - input to prio are planned tasks (see plan) scan x x creates scanned tasks in taskdir/project schedule - - schedules the planned tasks (see plan) start - - starts task from planned tasks (see plan) statistics - - shows statistics of time and count stop - - stops task from planned task update x x updates task in taskdir/project ===Files * ID id file contains the last issued id. * IDS ids file contains all issued ids. * Task files The tasks are named ID.task where ID is any Integer as 10.task. The files are saved as YAML files and can be edited directly. * Planned tasks files The planned tasks are save to YYYY-MM-DD_planned_tasks in syctask's system directory. Each task is saved with the task's directory and the ID. * Schedule files The schedule is saved to YYYY-MM-DD_time_schedule in the default task directory. The files are saved as YAML files and can be changed manually. * Log file Creating schedule and task processings is logged to tasks.log. For example when a task is started and stopped this is action is saved to tasks.log. * Tracked file A started task is saved to tracked_tasks. A semaphore file is created with ID.track when the task ID is started. When the task is stopped the semaphore file is deleted. * General purpose tasks With syctask setting -g PHONE so called general purpose tasks can be created. These tasks can be used for time tracking and later statistic evaluation to determine the amount of disturbences e.g. by phone. These tasks are saved to default_tasks. The general purpose tasks itself are also saved to the .syc/syctask directory as regular task files. * Default task dir The default task that is used e.g. with list is saved to default_tasks_dir. This can be set with the setting command. ==Working with syctask To work with syctask and get the most out of it there is to follow a certain process. ===Creating a schedule ==== View tasks In the morning before I start to work I scan my tasks with syctask list or syctask inspect to get an overview of my open tasks. $ syctask list ==== Plan tasks Next I start the planning phase with syctask plan. If I have a specific schedule for the day I will filter for the respective tasks $ syctask plan ==== Prioritize tasks (optionally) If I want to process the tasks in a specific sequence I prioritize the tasks with $ syctask prio ==== Create schedule I create a schedule with my working hours and meetings that have been scheduled with $ syctask schedule -w "8:00-18:00" -b "9:00-10:00,14:30-16:00" -m "Team,Status" ==== Create an agenda I assign the topics I want to discuss in the meetings to the meetings with syctask schedule -a "A:1,3,6;B:3,5" ==== Start a task To begin I start the first task in the schedule with syctask start -p ID (where ID is the ID of the planned (-p) tasks) $ syctask start -p 10 ==== End a task To end the task I invoke $ syctask stop This will stop the last started task ==== Re-schedule a task If I cannot finish a task than I update the task with a new follow-up date $ syctask update 23 -f tomorrow The task will be shown in the today's schedule as done. ==== Complete a task When the task is done I call $ syctask done 23 ===Attachements * E-mails If an e-mail creates a task I create a new task with syctask new title_of_task. The subject of the e-mail I prepend with the ID and move the e-mail to a <b>open topics</b> directory. * Files If I create files in the course of a task I create a folder in the task directory with the ID and save the files in this directory. If there is an existing directory I link to the file from the ID directory ==Supported platform syc-task up to version 0.4.2 has been tested with Ruby 1.9.3. Version 0.4.2 also runs with Ruby 2.7. It also works in Windows using Cygwin. Version 1.0.0 has been upgraded to Ruby 3.2. ==Add TAB-completion to syctask To activate bash's TAB-completion following lines have to be added to ~/.bashrc complete -F get_syctask_commands syctask function get_syctask_commands { if [ -z $2 ] ; then COMPREPLY=(`syctask help -c`) else COMPREPLY=(`syctask help -c $2`) fi } After ~/.bashrc has been updated the shell session has to be restarted with $ source ~/.bashrc Now syctask followed by TAB TAB will print $ syctask <TAB><TAB> delete done list plan scan stop _doc help new prio schedule start update To complete a command we can type $ syctask sch<TAB> which will complete to $ syctask schedule ==Output to Printer To print syctask's output to a printer pipe the command to lpr $ syctask schedule | lpr This will print the schedule to the default printer. To determine all available printer lpstat can be used with the lpstat -a command $ lpstat -a Canon-LBP6650-3470 accepting requests since Sat 16 Mar 2013 04:26:15 PM CET Dell-B1160w-Mono accepting requests since Sat 16 Mar 2013 04:27:45 PM CET To print to Dell-B1160w-Mono the following command can be used $ syctask schedule | lpr -P Dell-B1160w-Mono ==Release Notes ===Version 0.0.1 Implementation of new, update, list and done commands. ===Version 0.0.4 * delete: deleting tasks or remove tasks from a task plan * plan: plan tasks and add them to the task plan * schedule: create a schedule with work and busy time and assign the tasks from the task plan to the free times ===Version 0.0.6 * start: start a task and track the lead time * stop: stop the tracking and print the lead time of the task * start, stop: the task is logged in the ~/.tasks/task.log file when added and when stopped * prio: prioritize tasks in the task plan, that is specifying the sequence in that the tasks should be conducted * plan: --move flag added to move tasks from the specified plan to another days task plan * update, new: when a follow-up or a due date is provided the task is added to the provided dates task plan. If both dates are set the task is added to both dates task plans ===Version 0.0.7 * updated rdoc ===Version 0.1.15 * IDs are now unique independent of the task or project directory. After upgrading from a version 0.0.7 or older the user asked whether to re-index the tasks. It is adviced to tar the tasks before re-indexing with $ tar cvfz tasks.tar.gz .tasks other_task_directories * start will now show a timer in the upper right corner of the screen when started with the -t (--timer) flag. $ syctask start 10 -t In order to use the task timer ncurses has to be installed as the task timer uses tput from the ncurses library. * The schedule has a heading with the schedule's date and the working time * Planned tasks are now added at or after the current time if they are not done yet. Done tasks are shown in the past with the actual processing time. Tasks done before the start of the schedule are not shown in the schedule. * Meetings that are at the current time are indicated with a *. Active tasks are indicated with a star, re-scheduled tasks are indicated with a ~. * Assigning tasks to meetings in a schedule is now done with the task ID * Statistics show statistics about work time, meeting times, general purpose tasks and task processing. Total, min, max and average time and count is listed. If you have used version 0.0.7 it is adviced to delete tasks.log that lives in ~/.tasks before upgrading or in ~/.syc/syctask after upgrading. Otherwise the statistic results seem odd. * Meeting time in time line now shows correct duration * Info command searches for the location of a task and lists all task task directories with the tasks contained. * Plan move command sets the duration to the remaining processing time but at least to 15 minutes * With the setting command the default task directory can be set and general purpose tasks can be created. A general purpose task can be used for tracking to analyse how much time for phone calls is occupied. setting -l list all general purpose tasks and the default task directory * Prio command now takes a position flag together with the order flag to determine where to insert the newly ordered tasks * All commands that take an ID as argument (done, edit, start, update) look up the task file associated to the id in the ids file. If it is found the provided task directory is not considered for the task file. If the id is not contained in the ids file the task is looked up in the provided directory * Inspect command allows to list each today's unplanned task to edit, delete, mark as done or plan * Update command now has a duration flag to set the task's duration ====Version 0.2.0 * Migrated from TestUnit to Minitest * Implemented _timeleap_ {<img src="https://badge.fury.io/rb/timeleap.svg" alt="Gem Version" />}[http://badge.fury.io/rb/timeleap] which allows to specify additional time distances to yesterday, today tomorrow. Time distances come in two flavors as long and short forms. Examples for long forms are - yesterday|today|tomorrow - next|previous_monday|tuesday|...|sunday - monday|tuesday|...|sunday_in|back_1_week|month|year - in|back_10_days|weeks|months|years Examples for short forms are - y|tod|tom - n|pmo|tu|..|su - mo|tu|...|sui|b1w|m|y - i|b10d|w|m|y ====Version 0.2.1 * Fix a bug in `syctask delete --plan` * Add indicator '>' to task list when task contains notes * Refactor migration from version 0.0.7 and when user has deleted system files. The user can now specify the directories where the tasks are located and can also define directories to be excluded. This is especially helpful to omit search in large mounted directories, like from NAS servers. ====Version 0.3.1 * Add csv output spearated by ';' to the list command * Fix bug when schedule file is empty * Add scan command to scan tasks from files ====Version 0.3.2 * Fix bugs of missing class lib/syctask/scanner.rb ====Version 0.4.2 * delete command can take now ranges of ids, e.g. 1,2,4-8,5,20-25 * inspect can now go back in the task list * inspect will now show the updated task after making changes to the task in edit * inspect allows to specify a follow_up date * scan will ignore columns that are not part of a syctask task * scan recognizes 'Follow-up' as well as 'follow_up' now. That is an underscore can be replaced with '-' * Fix bug when scanning tables that have spaces between separator and column * When tasks.log file is missing `syctask inspect` prints warning with reason why statistics cannot be printed ====Version 1.0.0 * Upgrade to Ruby 3.2.2 ==Development Pull from Github and then run $ bundle install New classes have to be added to 'lib/syctask.rb' Debugging the interface can be done with GLI_DEBUG: $ bundle exec env GLI_DEBUG=true bin/syctask Building and pushing the gemfile to Rubygems $ gem build syctask.gemspec $ gem push syc-task-0.2.1.gem ==Tests The test files live in the folder test and start with test_. There is a rake file available to run all tests $ rake test The CLI is tested with Cucumber. To run the Cucumber features in verbose mode $ cucumber or if you prefer cleaner output run $ rake features ==License syc-task is released under the {MIT License}[http://opensource.org/licenses/MIT] ==Links * [http://www.github.com/sugaryourcoffee/syc-task] - Source code on GitHub * [https://rubygems.org/gems/syc-task] - RubyGems

# Rake::ToolkitProgram Create toolkit programs easily with `Rake` and `OptionParser` syntax. Bash completions and usage help are baked in. ## Installation Add this line to your application's Gemfile: ```ruby gem 'rake-toolkit_program' ``` And then execute: $ bundle Or install it yourself as: $ gem install rake-toolkit_program ## Quickstart * Shebang it up (in a file named `awesome_tool.rb`) ```ruby #!/usr/bin/env ruby ``` * Require the library ```ruby require 'rake/toolkit_program' ``` * Make your life easier ```ruby Program = Rake::ToolkitProgram ``` * Define your command tasks ```ruby Program.command_tasks do desc "Build it" task 'build' do # Ruby code here end desc "Test it" task 'test' => ['build'] do # Rake syntax ↑↑↑↑↑↑↑ for dependencies # Ruby code here end end ``` You can use `Program.args` in your tasks to access the other arguments on the command line. For argument parsing integrated into the help provided by the program, see the use of `Rake::Task(Rake::ToolkitProgram::TaskExt)#parse_args` below. * Wire the mainline ```ruby Program.run(on_error: :exit_program!) if $0 == __FILE__ ``` * In the shell, prepare to run the program (UNIX/Linux systems only) ```console $ chmod +x awesome_tool.rb $ ./awesome_tool.rb --install-completions Completions installed in /home/rtweeks/.bashrc Source /home/rtweeks/.bash-complete/awesome_tool.rb-completions for immediate availability. $ source /home/rtweeks/.bash-complete/awesome_tool.rb-completions ``` * Ask for help ```console $ ./awesome_tool.rb help *** ./awesome_tool.rb Toolkit Program *** . . . ``` ## Usage Let's look at a short sample toolkit program -- put this in `awesome.rb`: ```ruby #!/usr/bin/env ruby require 'rake/toolkit_program' require 'ostruct' ToolkitProgram = Rake::ToolkitProgram ToolkitProgram.title = "My Awesome Toolkit of Awesome" ToolkitProgram.command_tasks do desc <<-END_DESC.dedent Fooing myself I'm not sure what I'm doing, but I'm definitely fooing! END_DESC task :foo do a = ToolkitProgram.args puts "I'm fooed#{' on a ' if a.implement}#{a.implement}" end.parse_args(into: OpenStruct.new) do |parser, args| parser.no_positional_args! parser.on('-i', '--implement IMPLEMENT', 'An implement on which to be fooed') do |val| args.implement = val end end end if __FILE__ == $0 ToolkitProgram.run(on_error: :exit_program!) end ``` Make sure to `chmod +x awesome.rb`! What does this support? $ ./awesome.rb foo I'm fooed $ ./awesome.rb --help *** My Awesome Toolkit of Awesome *** Usage: ./awesome.rb COMMAND [OPTION ...] Avaliable options vary depending on the command given. For details of a particular command, use: ./awesome.rb help COMMAND Commands: foo Fooing myself help Show a list of commands or details of one command Use help COMMAND to get more help on a specific command. $ ./awesome.rb help foo *** My Awesome Toolkit of Awesome *** Usage: ./awesome.rb foo [OPTION ...] Fooing myself I'm not sure what I'm doing, but I'm definitely fooing! Options: -i, --implement IMPLEMENT An implement on which to be fooed $ ./awesome.rb --install-completions Completions installed in /home/rtweeks/.bashrc Source /home/rtweeks/.bash-complete/awesome.rb-completions for immediate availability. $ source /home/rtweeks/.bash-complete/awesome.rb-completions $ ./awesome.rb <tab><tab> foo help $ ./awesome.rb f<tab> ↳ ./awesome.rb foo $ ./awesome.rb foo <tab> ↳ ./awesome.rb foo -- $ ./awesome.rb foo --<tab><tab> --help --implement $ ./awesome.rb foo --i<tab> ↳ ./awesome.rb foo --implement $ ./awesome.rb foo --implement <tab><tab> --help awesome.rb $ ./awesome.rb foo --implement spoon I'm fooed on a spoon ### Defining Toolkit Commands Just define tasks in the block of `Rake::ToolkitProgram.command_tasks` with `task` (i.e. `Rake::DSL#task`). If `desc` is used to provide a description, the task will become visible in help and completions. When a command task is initially defined, positional arguments to the command are available as an `Array` through `Rake::ToolkitProgram.args`. ### Option Parsing This gem extends `Rake::Task` with a `#parse_args` method that creates a `Rake::ToolkitProgram::CommandOptionParser` (derived from the standard library's `OptionParser`) and an argument accumulator and `yield`s them to its block. * The arguments accumulated through the `Rake::ToolkitProgram::CommandOptionParser` are available to the task in `Rake::ToolkitProgram.args`, replacing the normal `Array` of positional arguments. * Use the `into:` keyword of `#parse_args` to provide a custom argument accumulator object for the associated command. The default argument accumulator constructor can be defined with `Rake::ToolkitProgram.default_parsed_args`. Without either of these, the default accumulator is a `Hash`. * Options defined using `OptionParser#on` (or any of the variants) will print in the help for the associated command. ### Positional Arguments Accessing positional arguments given after the command name depends on whether or not `Rake::Task(Rake::ToolkitProgram::TaskExt)#parse_args` has been called on the command task. If this method is not called, positional arguments will be an `Array` accessible through `Rake::ToolkitProgram.args`. When `Rake::Task(Rake::ToolkitProgram::TaskExt)#parse_args` is used: * `Rake::ToolkitProgram::CommandOptionParser#capture_positionals` can be used to define how positional arguments are accumulated. * If the argument accumulator is a `Hash`, the default (without calling this method) is to assign the `Array` of positional arguments to the `nil` key of the `Hash`. * For other types of accumulators, the positional arguments are only accessible if `Rake::ToolkitProgram::CommandOptionParser#capture_positionals` is used to define how they are captured. * If a block is given to this method, the block of the method will receive the `Array` of positional arguments. If it is passed an argument value, that value is used as the key under which to store the positional arguments if the argument accumulator is a `Hash`. * `Rake::ToolkitProgram::CommandOptionParser#expect_positional_cardinality` can be used to set a rule for the count of positional arguments. This will affect the _usage_ presented in the help for the associated command. * `Rake::ToolkitProgram::CommandOptionParser#map_positional_args` may be used to transform (or otherwise process) positional arguments one at a time and in the context of options and/or arguments appearing earlier on the command line. ### Convenience Methods * `Rake::Task(Rake::ToolkitProgram::TaskExt)#prohibit_args` is a quick way, for commands that accept no options or positional arguments, to declare this so the help and bash completions reflect this. It is equivalent to using `#parse_args` and telling the parser `parser.expect_positional_cardinality(0)`. * `Rake::ToolkitProgram::CommandOptionParser#no_positional_args!` is a shortcut for calling `#expect_positional_cardinality(0)` on the same object. * `Rake::Task(Rake::ToolkitProgram::TaskExt)#invalid_args!` and `Rake::ToolkitProgram::CommandOptionParser#invalid_args!` are convenient ways to raise `Rake::ToolkitProgram::InvalidCommandLine` with a message. ## OptionParser in Rubies Before and After v2.4 The `OptionParser` class was extended in Ruby 2.4 to simplify capturing options into a `Hash` or other container implementing `#[]=` in a similar way. This gem supports that, but it means that behavior varies somewhat between the pre-2.4 era and the 2.4+ era. To have consistent behavior across that version change, the recommendation is to use a `Struct`, `OpenStruct`, or custom class to hold program options rather than `Hash`. ## Development After checking out the repo, run `bin/setup` to install dependencies. You can also run `bin/console` for an interactive prompt that will allow you to experiment. To install this gem onto your local machine, run `bundle exec rake install`. To release a new version, update the version number in `version.rb`, and then run `bundle exec rake release`, which will create a git tag for the version, push git commits and tags, and push the `.gem` file to [rubygems.org](https://rubygems.org). To run the tests, use `rake`, `rake test`, or `rspec spec`. Tests can only be run on systems that support `Kernel#fork`, as this is used to present a pristine and isolated environment for setting up the tool. If run using Ruby 2.3 or earlier, some tests will be pending because functionality expects Ruby 2.4's `OptionParser`. ## Contributing Bug reports and pull requests are welcome on GitHub at https://github.com/PayTrace/rake-toolkit_program. For further details on contributing, see [CONTRIBUTING.md](./CONTRIBUTING.md).

# Quick Start The Owner API uses the JSON format, and must be accessed over a [secure connection](https://en.wikipedia.org/wiki/HTTPS). Let’s assume that the access token provided by your account manager is “TOKEN”. Here’s how to get the list of ids of all your invoices from the first week of August with a shell script: ```bash query="end_date=2018-08-08T00%3A00%3A00%2B00%3A00&start_date=2018-08-01T00%3A00%3A00%2B00%3A00" curl -i "https://api-eu.getaround.com/owner/v1/invoices?${query}" \ -H "Authorization: Bearer TOKEN" \ -H "Accept:application/json" \ -H "Content-Type:application/json" ``` And here’s how to get the invoice with the id 12345: ```bash curl -i "https://api-eu.getaround.com/owner/v1/invoices/12345" \ -H "Authorization: Bearer TOKEN" \ -H "Accept: application/json" \ -H "Content-Type: application/json"" ``` See the [endpoints section](#tag/Invoices) of this guide for details about the response format. Dates in request params should follow the ISO 8601 standard. # Authentication All requests must be authenticated with a [bearer token header](https://tools.ietf.org/html/rfc6750#section-2.1). You token will be sent to you by your account manager. Unauthenticated requests will return a 401 status. # Pagination The page number and the number of items per page can be set with the “page” and “per_page” params. For example, this request will return the second page of invoices, and 50 invoices per page: `https://api-eu.getaround.com/owner/v1/invoices?page=2&per_page=50` Both of these params are optional. The default page size is 30 items. The Getaround Owner API follows the [RFC 8288 convention](https://datatracker.ietf.org/doc/html/rfc8288) of using the `Link` header to provide the `next` page URL. Please don't build the pagination URLs yourself. The `next` page will be missing when you are requesting the last available page. Here's an example response header from requesting the second page of invoices `https://api-eu.getaround.com/owner/v1/invoices?page=2&per_page=50` ``` Link: <https://api-eu.getaround.com/owner/v1/invoices?page=3&per_page=50>; rel="next" ``` # Throttling policy and Date range limitation We have throttling policy that prevents you to perform more than 100 requests per min from the same IP. Also, there is a limitation on the size of the range of dates given in params in some requests. All requests that need start_date and end_date, do not accept a range bigger than 30 days. # Webhooks Getaround can send webhook events that notify your application when certain events happen on your account. This is especially useful to follow the lifecycle of rentals, tracking for example bookings or cancellations. ### Setup To set up an endpoint, you need to define a route on your server for receiving events, and then <a href="mailto:owner-api@getaround.com">ask Getaround</a> to add this URL to your account. To acknowledge receipt of a event, your endpoint must: - Return a `2xx` HTTP status code. - Be a secure `https` endpoint with a valid SSL certificate. ### Testing Once Getaround has set up the endpoint, and it is properly configured as described above, a test `ping` event can be sent by clicking the button below: <form action="/docs/api/owner/fire_ping_webhook" method="post"><input type="submit" value="Send Ping Event"></form> You should receive the following JSON payload: ```json { "data": { "ping": "pong" }, "type": "ping", "occurred_at": "2019-04-18T08:30:05Z" } ``` ### Retries Webhook deliveries will be attempted for up to three days with an exponential back off. After that point the delivery will be abandoned. ### Verifying Signatures Getaround will also provide you with a secret token, which is used to create a hash signature with each payload. This hash signature is passed along with each request in the headers as `X-Drivy-Signature`. Suppose you have a basic server listening to webhooks that looks like this: ```ruby require 'sinatra' require 'json' post '/payload' do push = JSON.parse(params[:payload]) "I got some JSON: #{push.inspect}" end ``` The goal is to compute a hash using your secret token, and ensure that the hash from Getaround matches. Getaround uses an HMAC hexdigest to compute the hash, so you could change your server to look a little like this: ```ruby post '/payload' do request.body.rewind payload_body = request.body.read verify_signature(payload_body) push = JSON.parse(params[:payload]) "I got some JSON: #{push.inspect}" end def verify_signature(payload_body) signature = 'sha1=' + OpenSSL::HMAC.hexdigest(OpenSSL::Digest.new('sha1'), ENV['SECRET_TOKEN'], payload_body) return halt 500, "Signatures didn't match!" unless Rack::Utils.secure_compare(signature, request.env['HTTP_X_DRIVY_SIGNATURE']) end ``` Obviously, your language and server implementations may differ from this code. There are a couple of important things to point out, however: No matter which implementation you use, the hash signature starts with `sha1=`, using the key of your secret token and your payload body. Using a plain `==` operator is not advised. A method like secure_compare performs a "constant time" string comparison, which renders it safe from certain timing attacks against regular equality operators. ### Best Practices - **Acknowledge events immediately**. If your webhook script performs complex logic, or makes network calls, it’s possible that the script would time out before Getaround sees its complete execution. Ideally, your webhook handler code (acknowledging receipt of an event by returning a `2xx` status code) is separate of any other logic you do for that event. - **Handle duplicate events**. Webhook endpoints might occasionally receive the same event more than once. We advise you to guard against duplicated event receipts by making your event processing idempotent. One way of doing this is logging the events you’ve processed, and then not processing already-logged events. - **Do not expect events in order**. Getaround does not guarantee delivery of events in the order in which they are generated. Your endpoint should therefore handle this accordingly. We do provide an `occurred_at` timestamp for each event, though, to help reconcile ordering.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.