Results for get-current-line

Command line tool to get the status of current users

Resource file management configuration tool for Pod.

Ruby library and command-line tool to get the weather forecast and current weather observations for an address. Uses the Census Bureau Geocoding API to geocode street addresses, and the National Weather Service Weather API to get weather forecasts and current weather observations.

Paradeiser is a command-line tool for the Pomodoro Technique. It keeps track of the current pomodoro and assists the user in managing active and past pomodori as well as breaks. Status commands and reports are provided to get insights.

== SYNOPSIS: require 'rubygems' require 'google_query' # See how you get spanked by the pound GoogleQuery::Currency.get 'AUD to GBP' => 1 U.S. dollar = 0.490484599 British pounds # Get population in Melbourne GoogleQuery::Population.get 'melbourne' => Population: 3,850,000 (Est.) (2nd) # Get the current time in London GoogleQuery::Time.get 'london' => 2:26 PM on Monday, July 30 # On the command line: bens-pb:~ ben$ gpop melbourne

Command line application that gets information from Yahoo! Weather RSS feed and prints it nicely on screen. You can provide your own format directives in order to customize output (see --help). Current weather conditions, forecasts up to five days and metric/english units available.

The suckysockets gem provides the user with the opportunity to check whether a power adapter is needed when travelling from one country to another. 1. How to install the gem gem install suckysockets 2. How to use it To run the program just type 'suckysockets' in the command line. You will be asked in which country you currently live. Please type the country name and press 'enter'. Next you need to enter your destination country and press 'enter' again. Then you receive the result telling you whether or nor you need an adapter travelling from you current country to the destination country. Three outcomes are possible: - an adapter is not needed. That is the case when all plugs common in your country of living fit all of the sockets in your destination country. - an adapter is definetely needed. That is the case when none of the plugs in your home country fit any of the sockets in your destination country. - an adapter is needed in certain cases: when some of your home country plugs fit some of the sockets, but some plugs don't. In that case you will get a detailed response telling you for which particular cases an adapter is needed.

Lookout-Rake Lookout-Rake provides Rake¹ tasks for testing using Lookout. ¹ See http://rake.rubyforge.org/ § Installation Install Lookout-Rake with % gem install lookout-rake § Usage Include the following code in your ‹Rakefile›: require 'lookout-rake-3.0' Lookout::Rake::Tasks::Test.new If the ‹:default› task hasn’t been defined it’ll be set to depend on the ‹:test› task. The ‹:check› task will also depend on the ‹:test› task. There’s also a ‹:test:coverage› task that gets defined that uses the coverage library that comes with Ruby 1.9 to check the test coverage when the tests are run. You can hook up your test task to use your Inventory¹: load File.expand_path('../lib/library-X.0/version.rb', __FILE__) Lookout::Rake::Tasks::Test.new :inventory => Library::Version Also, if you use the tasks that come with Inventory-Rake², the test task will hook into the inventory you tell them to use automatically, that is, the following will do: load File.expand_path('../lib/library-X.0/version.rb', __FILE__) Inventory::Rake::Tasks.define Library::Version Lookout::Rake::Tasks::Test.new For further usage information, see the {API documentation}³. ¹ Inventory: http://disu.se/software/inventory/ ² Inventory-Rake: http://disu.se/software/inventory-rake/ ³ API: http://disu.se/software/lookout-rake/api/Lookout/Rake/Tasks/Test/ § Integration To use Lookout together with Vim¹, place ‹contrib/rakelookout.vim› in ‹~/.vim/compiler› and add compiler rakelookout to ‹~/.vim/after/ftplugin/ruby.vim›. Executing ‹:make› from inside Vim will now run your tests and an errors and failures can be visited with ‹:cnext›. Execute ‹:help quickfix› for additional information. Another useful addition to your ‹~/.vim/after/ftplugin/ruby.vim› file may be nnoremap <buffer> <silent> <Leader>M <Esc>:call <SID>run_test()<CR> let b:undo_ftplugin .= ' | nunmap <buffer> <Leader>M' function! s:run_test() let test = expand('%') let line = 'LINE=' . line('.') if test =~ '^lib/' let test = substitute(test, '^lib/', 'test/', '') let line = "" endif execute 'make' 'TEST=' . shellescape(test) line endfunction Now, pressing ‹<Leader>M› will either run all tests for a given class, if the implementation file is active, or run the test at or just before the cursor, if the test file is active. This is useful if you’re currently receiving a lot of errors and/or failures and want to focus on those associated with a specific class or on a specific test. ¹ Find out more about Vim at http://www.vim.org/ § Financing Currently, most of my time is spent at my day job and in my rather busy private life. Please motivate me to spend time on this piece of software by donating some of your money to this project. Yeah, I realize that requesting money to develop software is a bit, well, capitalistic of me. But please realize that I live in a capitalistic society and I need money to have other people give me the things that I need to continue living under the rules of said society. So, if you feel that this piece of software has helped you out enough to warrant a reward, please PayPal a donation to now@disu.se¹. Thanks! Your support won’t go unnoticed! ¹ Send a donation: https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=now%40disu%2ese&item_name=Nikolai%20Weibull%20Software%20Services § Reporting Bugs Please report any bugs that you encounter to the {issue tracker}¹. ¹ See https://github.com/now/lookout-rake/issues § Authors Nikolai Weibull wrote the code, the tests, the manual pages, and this README.

# Rack::ReadOnly This gem allows Rack based APIs to be set to read only. At the most basic it can be used like this from your `config.ru`: ```ruby require 'rack/read_only' use Rack::ReadOnly, { active: ENV["READ_ONLY"] == "1", response_body: '{ "error": "This API is currently in read only mode." }' } run MyApp ``` When in read only mode the API will continue to respond to GET, HEAD, and OPTIONS requests as normal, but reject POST, PUT, DELETE, and PATCH requests with the body specified, and a 503 error code. ## Installation Add this line to your application's Gemfile: ```ruby gem 'rack-read_only' ``` And then execute: $ bundle Or install it yourself as: $ gem install rack-read_only ## Development After checking out the repo, run `bin/setup` to install dependencies. To install this gem onto your local machine, run `bundle exec rake install`. To release a new version, update the version number in `version.rb`, and then run `bundle exec rake release` to create a git tag for the version, push git commits and tags, and push the `.gem` file to [rubygems.org](https://rubygems.org). ## Contributing 1. Fork it ( https://github.com/jellybob/rack-read_only/fork ) 2. Create your feature branch (`git checkout -b my-new-feature`) 3. Commit your changes (`git commit -am 'Add some feature'`) 4. Push to the branch (`git push origin my-new-feature`) 5. Create a new Pull Request Any new builds should pass the tests on [Travis](https://travis-ci.org/jellybob/rack-read_only)

Log2json lets you read, filter and send logs as JSON objects via Unix pipes. It is inspired by Logstash, and is meant to be compatible with it at the JSON event/record level so that it can easily work with Kibana. Reading logs is done via a shell script(eg, `tail`) running in its own process. You then configure(see the `syslog2json` or the `nginxlog2json` script for examples) and run your filters in Ruby using the `Log2Json` module and its contained helper classes. `Log2Json` reads from stdin the logs(one log record per line), parses the log lines into JSON records, and then serializes and writes the records to stdout, which then can be piped to another process for processing or sending it to somewhere else. Currently, Log2json ships with a `tail-log` script that can be run as the input process. It's the same as using the Linux `tail` utility with the `-v -F` options except that it also tracks the positions(as the numbers of lines read from the beginning of the files) in a few files in the file system so that if the input process is interrupted, it can continue reading from where it left off next time if the files had been followed. This feature is similar to the sincedb feature in Logstash's file input. Note: If you don't need the tracking feature(ie, you are fine with always tailling from the end of file with `-v -F -n0`), then you can just use the `tail` utility that comes with your Linux distribution.(Or more specifically, the `tail` from the GNU coreutils). Other versions of the `tail` utility may also work, but are not tested. The input protocol expected by Log2json is very simple and documented in the source code. ** The `tail-log` script uses a patched version of `tail` from the GNU coreutils package. A binary of the `tail` utility compiled for Ubuntu 12.04 LTS is included with the Log2json gem. If the binary doesn't work for your distribution, then you'll need to get GNU coreutils-8.13, apply the patch(it can be found in the src/ directory of the installed gem), and then replace the bin/tail binary in the directory of the installed gem with your version of the binary. ** P.S. If you know of a way to configure and compile ONLY the tail program in coreutils, please let me know! The reason I'm not building tail post gem installation is that it takes too long to configure &amp;&amp; make because that actually builds every utilties in coreutils. For shipping logs to Redis, there's the `lines2redis` script that can be used as the output process in the pipe. For shipping logs from Redis to ElasticSearch, Log2json provides a `redis2es` script. Finally here's an example of Log2json in action: From a client machine: tail-log /var/log/{sys,mail}log /var/log/{kern,auth}.log | syslog2json | queue=jsonlogs \ flush_size=20 \ flush_interval=30 \ lines2redis host.to.redis.server 6379 0 # use redis DB 0 On the Redis server: redis_queue=jsonlogs redis2es host.to.es.server Resources that help writing log2json filters: - look at log2json.rb source and example filters - http://grokdebug.herokuapp.com/ - http://www.ruby-doc.org/stdlib-1.9.3/libdoc/date/rdoc/DateTime.html#method-i-strftime

Log2json lets you read, filter and send logs as JSON objects via Unix pipes. It is inspired by Logstash, and is meant to be compatible with it at the JSON event/record level so that it can easily work with Kibana. Reading logs is done via a shell script(eg, `tail`) running in its own process. You then configure(see the `syslog2json` or the `nginxlog2json` script for examples) and run your filters in Ruby using the `Log2Json` module and its contained helper classes. `Log2Json` reads from stdin the logs(one log record per line), parses the log lines into JSON records, and then serializes and writes the records to stdout, which then can be piped to another process for processing or sending it to somewhere else. Currently, Log2json ships with a `tail-log` script that can be run as the input process. It's the same as using the Linux `tail` utility with the `-v -F` options except that it also tracks the positions(as the numbers of lines read from the beginning of the files) in a few files in the file system so that if the input process is interrupted, it can continue reading from where it left off next time if the files had been followed. This feature is similar to the sincedb feature in Logstash's file input. Note: If you don't need the tracking feature(ie, you are fine with always tailling from the end of file with `-v -F -n0`), then you can just use the `tail` utility that comes with your Linux distribution.(Or more specifically, the `tail` from the GNU coreutils). Other versions of the `tail` utility may also work, but are not tested. The input protocol expected by Log2json is very simple and documented in the source code. ** The `tail-log` script uses a patched version of `tail` from the GNU coreutils package. A binary of the `tail` utility compiled for Ubuntu 12.04 LTS is included with the Log2json gem. If the binary doesn't work for your distribution, then you'll need to get GNU coreutils-8.13, apply the patch(it can be found in the src/ directory of the installed gem), and then replace the bin/tail binary in the directory of the installed gem with your version of the binary. ** P.S. If you know of a way to configure and compile ONLY the tail program in coreutils, please let me know! The reason I'm not building tail post gem installation is that it takes too long to configure && make because that actually builds every utilties in coreutils. For shipping logs to Redis, there's the `lines2redis` script that can be used as the output process in the pipe. For shipping logs from Redis to ElasticSearch, Log2json provides a `redis2es` script. Finally here's an example of Log2json in action: From a client machine: tail-log /var/log/{sys,mail}log /var/log/{kern,auth}.log | syslog2json | queue=jsonlogs \ flush_size=20 \ flush_interval=30 \ lines2redis host.to.redis.server 6379 0 # use redis DB 0 On the Redis server: redis_queue=jsonlogs redis2es host.to.es.server Resources that help writing log2json filters: - look at log2json.rb source and example filters - http://grokdebug.herokuapp.com/ - http://www.ruby-doc.org/stdlib-1.9.3/libdoc/date/rdoc/DateTime.html#method-i-strftime

# Introduction Welcome to the reference for the Lishogi API! Lishogi is free/libre, open-source shogi server forked from lichess powered by volunteers and donations. Currently this page is a work in progress, certain information here might be wrong and incorrect! Expect it to be done during 2022. - Get help in the [Lishogi Discord channel](https://discord.gg/YFtpMGg3rR) - [Contribute to this documentation on Github](https://github.com/WandererXII/lishogi/blob/master/public/doc/lishogi-api.yaml) - Check out [Lishogi widgets to embed in your website](https://lishogi.org/developers) ## Endpoint All requests go to `https://lishogi.org` (unless otherwise specified). ## Rate limiting All requests are rate limited using various strategies, to ensure the API remains responsive for everyone. Only make one request at a time. If you receive an HTTP response with a [429 status](https://en.wikipedia.org/wiki/List_of_HTTP_status_codes#429), please wait a full minute before resuming API usage. ## Streaming with ND-JSON Some API endpoints stream their responses as [Newline Delimited JSON a.k.a. **nd-json**](http://ndjson.org/), with one JSON object per line. Here's a [JavaScript utility function (for lichess)](https://gist.github.com/ornicar/a097406810939cf7be1df8ea30e94f3e) to help reading NDJSON streamed responses.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.