Results for get-installed-path

Cross-platform way of finding executables in all the paths in $PATH. This is similar to the Unix 'which' command, however, instead of finding the first occurence of the executable in $PATH, it finds all occurences in $PATH. This could be useful if you installed something that modified your PATH and now you're executing a different version but can't figure out what happened. Example: On OS X, OpenSSL is installed in /usr/bin/openssl % which openssl ==> /usr/bin/openssl After installing PostgreSQL: % which openssl ==> /Applications/Postgres.app/Contents/MacOS/bin/openssl If you're trying to diagnose what happened, you can use: % whiches openssl ==> [ [0] "/Applications/Postgres.app/Contents/MacOS/bin/openssl", [1] "/usr/bin/openssl" ] This will show you that the first one that is found in the PATH is the one from Postgres, so if you want to get back your original one, you have to modify your PATH accordingly.

= Mcrypt - libmcrypt bindings for Ruby Mcrypt provides Ruby-language bindings for libmcrypt(3), a symmetric cryptography library. {Libmcrypt}[http://mcrypt.sourceforge.net/] supports lots of different ciphers and encryption modes. == You will need * A working Ruby installation (>= 1.8.6 or 1.9) * A working libmcrypt installation (2.5.x or 2.6.x, tested with 2.5.8) * A sane build environment == Installation Install the gem: gem install ruby-mcrypt --test -- --with-mcrypt-dir=/path/to/mcrypt/prefix If you're installing on Ubuntu: sudo apt-get install mcrypt libmcrypt-dev gem install ruby-mcrypt If you want to run the longer test suite, do this instead: MCRYPT_TEST_BRUTE=1 \ gem install ruby-mcrypt --test -- --with-mcrypt-dir=/path/to/mcrypt/prefix Put this in your code: require 'rubygems' require 'mcrypt' Or in Rails' environment.rb: gem "ruby-mcrypt", :lib => "mcrypt" == Usage crypto = Mcrypt.new(:twofish, :cbc, MY_KEY, MY_IV, :pkcs) # encryption and decryption in one step ciphertext = crypto.encrypt(plaintext) plaintext = crypto.decrypt(ciphertext) # encrypt in smaller steps while chunk = $stdin.read(4096) $stdout << crypto.encrypt_more(chunk) end $stdout << crypto.encrypt_finish # or decrypt: while chunk = $stdin.read(4096) $stdout << crypto.decrypt_more(chunk) end $stdout << crypto.decrypt_finish == Known Issues * Test coverage is lacking. If you find any bugs, please let the author know. == Wish List * IO-like behavior, e.g. crypto.open($stdin) { |stream| ... } == Author * Philip Garrett <philgarr at gmail.com> == Copyright and License Copyright (c) 2009-2013 Philip Garrett. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

$Id: README.txt 204 2010-11-30 02:20:04Z pwilkins $ sm-transcript reads results of SLS processing and produces transcripts for the SpokenMedia browser. For each file in the source folder whose extension matches the source type, a file of destination type is created in the destination folder. All of these parameters have default values. Note: Examples of the commands you enter in the terminal are for *nix. The command prompt in the examples is: felix$ <command line> If you are a Windows user, make the usual adjustments. Requirements: sm-transcript is written in Ruby and packaged as a RubyGem. Since Ruby is not a compiled language, you will need to have Ruby installed on your machine to run sm-transcript. You can determine if Ruby is installed by typing "ruby -v" at a terminal prompt. It should return the version of Ruby that is installed. If Ruby is not installed on your machine, navigate to http://www.ruby-lang.org/ and follow the installation instructions. sm-transcript was developed using Ruby 1.8. Other Ruby versions have not been tested as of this release. Installation: You can get sm-transcript as either a RubyGem or as source from svn. The preferred way to install this package is as a Rubygem. You can download and install the gem with this command: felix$ sudo gem install [--verbose] sm-transcript This command downloads the most recent version of the gem from rubygems.org and makes it active. Previous versions of the gem remain installed, but are deactivated. You must use "sudo" to properly install the gem. If you execute "gem install" (omitting the "sudo") the gem is installed in your home gem repository and it isn't in your path without additional configuration. Note: You need sudo privileges to run the command as written. If you can't sudo, then you can install it locally and will need some additional configuration. Contact me (or your local Ruby wizard) for assistance. The executable is now in your path. You can cleanly uninstall the gem with this command: felix$ sudo gem uninstall sm-transcript If you have access to our svn repository, you are welcome to check out the code. Be warned that the trunk tip is not necessarily stable. It changes frequently as enhancements (and bug fixes) are added. (note that the 'smb_transcript' in the command line below is not a typo.) svn co svn+ssh://svn.mit.edu/oeit-tsa/SMB/smb_transcript/trunk sm_transcript build the gem by running this command from the directory you installed the source. This is what it looks like on my machine: felix$ rake gem The gem will be built and put in ./pkg You can now use the gem installation instructions above. Using the App: Run with no command line parameters, the app reads *.wrd files out of ./results and writes *.t1.html files to ./transcripts. These directories are relative to where sm_transcript is called. Note: destination files are overwritten without a warning prompt. If you want to preserve an existing output file, rename it before running the app again. For example, run the app by navigating to the bin folder and enter projects/sm_transcript/bin felix$ sm_transcript This command run from this folder will read *.wrd files from bin/results and write *-t1.html to bin/transcripts. Usage: sm_transcript [options] --srcdir PATH Read files from this folder (Default: ./results) --destdir PATH Write files to this folder (Default: ./transcripts) --srctype wrd | seg | txt | ttml | srt Kind of file to process (Default: wrd) --desttype html | ttml | datajs | json Kind of file to output (Default: html) -h, --help Show this message There is a serious gotch'a in specifying the srctype parameter: it must match the case of the file extension that you're processing. This means that if the srt files that you are processing have the extension .SRT, then you must specify the srctype as "SRT". Pretty lame, I know. I will update the gem with a fix shortly. My apologies until then. Troubleshooting: sm-transcript requires additional gems to operate. The RubyGem installation should install dependencies automatically, but when it doesn't, you get an error that includes ... no such file to load -- builder (LoadError) in the first few lines when you run sm-transcript, the problem is a missing dependent gem. (the error above indicates that the Builder gem is missing.) Try installing the missing gem. For the error above, the command looks like this on my computer: felix$ sudo gem install builder See "Required Gems" below for more information. A warning message such as: "WARNING: Nokogiri was built against LibXML version 2.7.6, but has dynamically loaded 2.7.7"" may be safely ignored. If you continue to have trouble, feel free to contact me. Upgrading: You can easily upgrade by simply executing the same command you used to install the gem. Running install again will add the newer version and make it active. By default the most recent version is used, but older versions are still available, simply inactive. If are using svn, you should already know what to do. Required Gems: builder - create structured data, such as XML extensions - added for the 'require_relative' command. (To get this command in Ruby 1.8 you need to install this gem, for Ruby 1.9 the command is already part of the core.) htmlentities - html parsing json - create JSON structured data nokogiri - xml parsing library optparse - option parsing of command line ostruct - open data structures ppcommand - pp is a pretty printer. It is used only for debugging rake - make for Ruby rubygems - support for gems (shouldn't be needed for Ruby 1.9) shoulda - enhancement for Test::Unit This command installs gems on OSX and Linux: felix$ sudo gem install <gem name> I recommend running the following command to update to latest version of rubygems before loading new gems. felix$ sudo gem update --system Unit Tests: You may run all unit tests by navigating to the test folder and running rake with no parameters (the default rake task runs all tests). On my computer, it looks like this: projects/sm_transcript/test felix$ rake Release Notes: Initial Version - runs under Ruby 1.8.x. version 0.0.4 - fixes bug when processing .WRD files with CRLF line endings. version 0.0.5 - removed due to posting error version 0.0.6 - added srctype of ttml and desttype of json, fixed bug where beginning time of word was actually for previous word. version 0.0.7 - added srt as srctype version 0.0.8 - fixed bug that dropped last phrase from transcripts version 1.0.0 - declared this version 1.0.0 to conform more closely with gem numbering conventions. All tests run successfully. To Do: - specify individual files for processing rather than folders - fix bug in srt processing: can't read Creole srt content. - allow user to modify the "t1" file extension for addition languages of the same transcript. - update code to run under Ruby 1.9

OVH::Provisioner ================ Interact with OVH REST API, mainly targeted to manage dedicated servers and OVH DNS. Installation ------------ Add this line to your application's Gemfile: ```ruby gem 'ovh-provisioner' ``` And then execute: $ bundle Or install it yourself as: $ gem install ovh-provisioner Configuration ------------- The best way to use ovh-provisioner is to create a configuration file (recommended path: ~/.config/ovh-provisioner.yml) containing your keys and some general configuration. Then, just launch it to get all commands with their description. Example: ```yaml # All keys can be overriden with cli options api_url: https://eu.api.ovh.com/1.0 app_key: XXXXXXXXXXXX app_secret: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX consumer_key: XXXXXXXXXXXXXXXXXXXXXXXXXXXX template: template_name # is be defined in OVH manager when you save a template use_distrib_kernel: true ssh-key: 'key_name_to install' # name_scheme support any variable available as attribute in # lib/ovh/provisioner/api_object/dedicated_server.rb # Along with name_domain, it is used to rename (reverse dns) servers name_scheme: '%{location}-%{flavor_tag}-%{server_id}.%{vrack}' name_domain: example.com # example of flavors, you can use any hardware parameters from # GET /dedicated/server/{serviceName}/specifications/hardware # to differentiate your flavors flavors: EG-16S: tag: eg16s hardware: description: 'Serveur EG-16 - E3-1230v6 - 16GB - SoftRaid 2x450GB NVMe' EG-32S: tag: eg32s hardware: description: 'Serveur EG-32 - E3-1270v6 - 32GB - SoftRaid 2x450GB NVMe' EG-64S: tag: eg64s hardware: description: 'Serveur EG-64 - E5-1650v3 - 64GB - SoftRaid 2x450GB NVMe' ``` Development ----------- After checking out the repo, run `bin/setup` to install dependencies. Then, run `rake spec` to run the tests. You can also run `bin/console` for an interactive prompt that will allow you to experiment. To install this gem onto your local machine, run `bundle exec rake install`. To release a new version, update the version number in `version.rb`, and then run `bundle exec rake release`, which will create a git tag for the version, push git commits and tags, and push the `.gem` file to [rubygems.org](https://rubygems.org). Contributing ------------ Please read carefully [CONTRIBUTING.md](CONTRIBUTING.md) before making a merge request. License and Author ------------------ - Author:: Samuel Bernard (<samuel.bernard@gmail.com>) ```text Copyright (c) 2015-2016 Sam4Mobile, 2017-2018 Make.org Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. ```

Twitterpunch =============== Twitterpunch is designed to work with PhotoBooth and OS X Folder Actions. When this script is called with the name of an image file, it will post the image to Twitter, along with a message randomly chosen from a list and a specified hashtag. If you call the script with the `--stream` argument instead, it will listen for tweets to that hashtag and download them to a specified directory. If the tweet came from another user, Twitterpunch will speak it aloud. Typically, you'll run one copy on an OSX laptop with PhotoBooth, and a separate copy on another machine (either Windows or OSX) for the viewer. You can also use a mobile device as a remote control, if you like. This will allow the user to enter a custom message for each photo that gets tweeted out, if they'd like. Configuration =========== Configure the program via the `~/.twitterpunch/config.yaml` YAML file. This file should look similar to the example below. --- :twitter: # twitter configuration :consumer_key: &lt;consumer key&gt; :consumer_secret: &lt;consumer secret&gt; :access_token: &lt;access token&gt; :access_token_secret: &lt;access secret&gt; :messages: # list of messages to attach - Hello there # to outgoing tweets - I'm a posting fool - minimally viable product :hashtag: Twitterpunch # The hashtag to post and listen to :handle: Twitterpunch # The twitter username to post as :photodir: ~/Pictures/twitterpunch/ # Where to save downloaded images :logfile: ~/.twitterpunch/activity.log # Where to save logs :viewer: # Use the built-in slideshow viewer :count: 5 # How many images to have onscreen at once :remote: :timeout: 45 # How long the button should remain disabled for :apptitle: dslrBooth # The photo booth application title :hotkey: space # Which hotkey to send to trigger a photo 1. Generate a skeleton configuration file * `twitterpunch --configure` 1. Edit the configuration file as needed. You'll be prompted with the path. * If you have your own Twitter application credentials, you're welcome to use them. 1. Authorize the application with the Twitter API. * `twitterpunch --authorize` Usage ========== ### Using OS X PhotoBooth 1. Start PhotoBooth at least once to generate its library. 1. Install the Twitterpunch Folder Action * `twitterpunch --install` * It may claim that it could not be attached, fear not. 1. Profit! * _and by that, I mean take some shots with PhotoBooth!_ *Note*: if the folder action doesn't seem to work and photos aren't posted to Twitter, here are some troubleshooting steps to take: 1. Run Twitterpunch by hand with photos as arguments. This may help you isolate configuration or authorization issues. * `twitterpunch foo.jpg` 1. Correct the path in the workflow. * `which twitterpunch` * Edit the Twitterpunch folder action to include that path. #### Using the remote web app Configure the remote web app using the `:remote` hash in `config.yaml`. You can usually find the title of the app using `system_profiler -detailLevel full SPApplicationsDataType` and grepping for the name or path to the `.app`. In this example, the title is _dslrBooth_. [ben@ganymede] ~ $ system_profiler -detailLevel full SPApplicationsDataType | grep -B8 dslrBooth.app dslrBooth: Version: 2.9 Obtained from: Identified Developer Last Modified: 10/14/17, 9:50 PM Kind: Intel 64-Bit (Intel): Yes Signed by: Developer ID Application: Hope Pictures LLC (MZR5GHAQX4), Developer ID Certification Authority, Apple Root CA Location: /Applications/dslrBooth.app 1. Run the app with `twitterpunch --remote` 1. Browse to the app with http://{address}:8080 1. [optional] If on an iOS device, add to your homescreen * This will give you "app behaviour", such as full screen, and a nice icon #### Troubleshooting. 1. Make sure the folder action is installed properly 1. Use the Finder to navigate to `~/Pictures/` 1. Right click on the `Photo Booth Library` icon and choose _Show Package Contents_. 1. Right click on the `Pictures` folder and choose `Services &gt; Folder Actions Setup` 1. Make sure that the `Twitterpunch` action is attached. 1. Install the folder action 1. Open the `resources` folder of this gem. * Likely to be found in `/Library/Ruby/Gems/{version}/gems/twitterpunch-#{version}/resources/`. 1. Double click on the `Twitterpunch` folder action and install it. * It may claim that it could not be attached, fear not. ### Using something besides PhotoBooth Configure the program you are using for your photo shoot to call Twitterpunch each time it snaps a photo. Pass the name of the new photo as a command line argument. Alternatively, you could batch them, as Twitterpunch can accept multiple files at once. [ben@ganymede] ~ $ twitterpunch photo.jpg [photo2.jpg photo3.jpg photo4.jpg] You can manually install the Folder Action, or you can follow the automated install process after tweaking the workflow slightly. 1. Identify where the app stores the resulting image files. 1. Edit the Twitterpunch folder action to include that path. 1. Follow the steps above to install the Folder Action. ### Viewing the Twitter stream Twitterpunch will run on OS X or Windows equally well. Simply configure it on the computer that will act as the Twitter display and then run in streaming mode. [ben@ganymede] ~ $ twitterpunch --stream There are two modes that Twitterpunch can operate in. 1. If a `:hashtag` is defined then all images tweeted to the configured hashtag will be displayed in the slideshow. 1. Otherwise, Twitterpunch will stream the `:handle` Twitter user's stream and display all images either posted by that user or addressed to that user. With protected tweets, you can have rudimentary access control. In either mode, tweets that come from any other user will also be spoken aloud. If you don't want to use the built-in slideshow viewer, you can disable it by removing the `:viewer` key from your `~/.twitterpunch/config.yaml` config file. Twitterpunch will then simply download the tweeted images and save them into the `:photodir` directory. You can then use anything you like to view them. There are currently two decent viewing options I am aware of. * Windows background image: * Configure the Windows background to randomly cycle through photos in a directory. * Hide desktop icons. * Hide the taskbar. * Disable screensaver and power savings. * Drawbacks: You're using Windows and you have to install Ruby &amp; RubyGems manually. * OS X screensaver: * Choose one of the sexy screensavers and configure it to show photos from the `:photodir` * Set screensaver to a super short timeout. * Disable power savings. * Drawbacks: The screensaver doesn't reload dynamically, so I have to kick it and you'll see it reloading each time a new tweet comes in. Limitations =========== * It currently requires manual setup for Folder Actions. * Rubygame is kind of a pain to set up. Contact ======= * Author: Ben Ford * Email: binford2k@gmail.com * Twitter: @binford2k * IRC (Freenode): binford2k

Lookout-Rack Lookout-Rack provides easy interaction with Rack¹ from Lookout². It provides you with a session connected to your Rack application through which you can make requests, check responses, follow redirects and set, inspect, and clear cookies. ¹ See http://rack.rubyforge.org/ ² See http://disu.se/software/lookout/ § Installation Install Lookout-Rack with % gem install lookout-rack § Usage Include the following code in your ‹Rakefile› (provided that you’re using Lookout-Rake¹): require 'lookout-rack-3.0' Lookout::Rake::Tasks::Test.new do |t| t.requires << 'lookout-rack-3.0' end ¹ See http://disu.se/software/lookout-rake/ Then set up a ‹fixtures/config.ru› file that Lookout-Rack will use for loading your Rack app. load 'path/to/app.rb' use Rack::Lint run Path::To::App This file, if it exists, will be loaded during the first call to #session. If it doesn’t exist, ‹config.ru› will be used instead. You can now test your app: Expectations do expect 200 do session.get('/').response.status end end The #session method returns an object that lets you #get, #post, #put, and #delete resources from the Rack app. You call these method with a URI¹ that you want to access/modify together with any parameters that you want to pass and any Rack environment that you want to use (which isn’t very common). For example, let’s get ‹/pizzas/› with olives on them: expect 200 do session.get('/pizzas/', 'olives' => '1').response.status end ¹ Abbreviation for Uniform Resource Identifier The #response method on #session returns a mock Rack response object that can be queried for results. Similarly, there’s a #request method that lets you inspect the request that was made. Lookout-Rack also deals with cookies. Assuming that ‹/cookies/set/› will set any cookies that we pass it and that ‹/cookies/show/› will simply do nothing relevant, the following expectation will pass: expect 'value' => '1' do session. get('/cookies/set/', 'value' => '1'). get('/cookies/show/').request.cookies end Sometimes you may want to set cookies yourself before making a request. You then use the #cookie method, which takes a String of ‹KEY=VALUE› pairs separated by newlines, commas, and/or semicolons and sets those cookies in the session: expect 'value' => '1', 'other' => '2' do session. cookie("value=1\n\nother=2"). get('/cookies/show/').request.cookies end You may also want to clear all cookies in your session using #clear: expect({}) do session. get('/cookies/set', 'value' => '1'). clear. get('/cookies/show').request.cookies end Finally, to test redirects, call the #redirect! method on the session object, assuming that ‹/redirected/› redirects to another location: expect result.redirect? do session.get('/redirected/').response end expect result.not.redirect? do session.get('/redirected/').redirect!.response end That’s basically all there’s to it. You can check the {API documentation}¹ for more information. ¹ See http://disu.se/software/lookout-rack/api/Lookout/Rack/ § Financing Currently, most of my time is spent at my day job and in my rather busy private life. Please motivate me to spend time on this piece of software by donating some of your money to this project. Yeah, I realize that requesting money to develop software is a bit, well, capitalistic of me. But please realize that I live in a capitalistic society and I need money to have other people give me the things that I need to continue living under the rules of said society. So, if you feel that this piece of software has helped you out enough to warrant a reward, please PayPal a donation to now@disu.se¹. Thanks! Your support won’t go unnoticed! ¹ Send a donation: https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=now@disu.se&item_name=Lookout-Rack § Reporting Bugs Please report any bugs that you encounter to the {issue tracker}¹. ¹ See https://github.com/now/lookout-rack/issues § Authors Nikolai Weibull wrote the code, the tests, the documentation, and this README. § Licensing Lookout-Rack is free software: you may redistribute it and/or modify it under the terms of the {GNU Lesser General Public License, version 3}¹ or later², as published by the {Free Software Foundation}³. ¹ See http://disu.se/licenses/lgpl-3.0/ ² See http://gnu.org/licenses/ ³ See http://fsf.org/

Diff and patch tables

# Fresh::Auth This gem makes it really, REALLY easy to use the Freshbooks API. It couldn't be easier. With only 3 functions you'll ever need to use, and only 2 required configuration values, it can't get any easier. ## Installation Add this line to your application's Gemfile: gem 'fresh-auth' And then execute: $ bundle Or install it yourself as: $ gem install fresh-auth ## Usage ### Configuration: You must define your Freshbooks subdomain and your OAuth Secret in your application code before using Fresh::Auth. For Ruby on Rails apps, a new file at config/initializers/fresh-auth.rb would be appropriate. Your configuration file should look like this (you fill in the three empty strings): Fresh::Auth.configure do |config| # The part of your login url between 'http://' and '.freshbooks.com' config.url.subdomain = "" # Under 'My Account' (on the top right when you're logged into Freshbooks) # -> 'Freshbooks API' -> 'OAuth Developer Access' -> 'OAuth Secret' # You'll need to request this from Freshbooks initially. config.oauth_secret = "" # Optional. Any string of your choice. Be creative or check out http://www.thebitmill.com/tools/password.html config.nonce_salt = "" end Fear not: If you try to use Fresh::Auth without configuring it first, an exception will be thrown that clearly describes the problem. ### Public API: There are two modules in this API: Fresh::Auth::Authentication and Fresh::Auth::Api #### Fresh::Auth::Authentication This module authenticates you with Freshbooks, storing the authentication in an array called `session`. This integrates seamlessly with Ruby on Rails' controller environment. If you're using some framework other than Ruby on Rails, make sure to define session in your class before including the Authentication module. This isn't recommended because your class will also need to define other objects called `params` and `request` and implement a `redirect_to` method. It gets complicated. Better leave it to Rails to handle this for you. The only public function of this module is AuthenticateWithFreshbooks. To use it, just add the following line of code to your controller: ` include Fresh::Auth::Authentication ` Then, the following line of code authenticates with Freshbooks from any method in your controller: ` AuthenticateWithFreshbooks() ` Note that, after authenticating with Freshbooks, the user will be redirected back to the same path using HTTP GET, so make sure the resource supports HTTP GET and that in the business logic executed on GET, AuthenticateWihFreshbooks() is called. #### Fresh::Auth::Api Once you've authenticated, you want to send XML requests to Freshbooks. The first step is preparing the XML with Fresh::Auth::Api.GenerateXml, which you'll supply with a block that defines all the nested XML that you want in your request. GenerateXml also takes two arguments before the block: the class and method that you want to call. First, in your controller: `include Fresh::Auth::Api` Then, in some method in that controller: my_xml = GenerateXml :invoice, :update do |xml| xml.client_id 20 xml.status 'sent' xml.notes 'Pick up the car by 5' xml.terms 'Cash only' xml.lines { xml.line { xml.name 'catalytic converter' xml.quantity 1 xml.unit_cost 450 xml.type 'Item' } xml.line { xml.name 'labor' xml.quantity 1 xml.unit_cost 60 xml.type 'Time' } } end Ok, you created the XML. Now you want to send it. Sounds pretty complicated, right? Not at all! Ready? Let's go! `_response = PostToFreshbooksApi my_xml` Now, are you wondering what's in `_response`? I'll tell you shortly, but before we discuss that, we have to know about the exception that PostToFreshbooksApi might raise. It raises a detailed error message if the response status is not 'ok'. Makes sense, right? Now, you still want to know what's in `_response`? Oh, nothing fancy. Just a Nokogiri XML object, representing the root element of the xml response. Could this get any easier? ## Contributing 1. Fork it 2. Create your feature branch (`git checkout -b my-new-feature`) 3. Commit your changes (`git commit -am 'Added some feature'`) 4. Push to the branch (`git push origin my-new-feature`) 5. Create new Pull Request

== Confidently Build Terminal Apps Rooibos[https://rooibos.run] helps you build interactive terminal applications. Keep your code understandable and testable as it scales. Rooibos handles keyboard, mouse, and async work so you can focus on behavior and user experience. gem install rooibos <i>Currently in beta. APIs may change before 1.0.</i> === Get Started in Seconds rooibos new my_app cd my_app rooibos run That's it. You have a working app with keyboard navigation, mouse support, and clickable buttons. Open <tt>lib/my_app.rb</tt> to make it your own. --- === The Pattern \Rooibos uses Model-View-Update, the architecture behind Elm[https://guide.elm-lang.org/architecture/], Redux[https://redux.js.org/], and {Bubble Tea}[https://github.com/charmbracelet/bubbletea]. State lives in one place. Updates flow in one direction. The runtime handles rendering and runs background work for you. --- === Hello, MVU The simplest \Rooibos app. Press any key to increment the counter. Press <tt>Ctrl</tt>+<tt>C</tt> to quit. require "rooibos" module Counter # Init: How do you create the initial model? Init = -> { 0 } # View: What does the user see? View = -> (model, tui) { tui.paragraph(text: <<~END) } Current count: #{model}. Press any key to increment. Press Ctrl+C to quit. END # Update: What happens when things change? Update = -> (message, model) { if message.ctrl_c? Rooibos::Command.exit elsif message.key? model + 1 end } end Rooibos.run(Counter) That's the whole pattern: Model holds state, Init creates it, View renders it, and Update changes it. The runtime handles everything else. --- === Your First Real Application A file browser in sixty lines. It opens files, navigates directories, handles errors, styles directories and hidden files differently, and supports vim-style keyboard shortcuts. If you can do this much with this little code, imagine how easy _your_ app will be to build. require "rooibos" module FileBrowser # Model: What state does your app need? Model = Data.define(:path, :entries, :selected, :error) Init = -> { path = Dir.pwd entries = Entries[path] Ractor.make_shareable( # Ensures thread safety Model.new(path:, entries:, selected: entries.first, error: nil)) } View = -> (model, tui) { tui.block( titles: [model.error || model.path, { content: KEYS, position: :bottom, alignment: :right}], borders: [:all], border_style: if model.error then tui.style(fg: :red) else nil end, children: [tui.list(items: model.entries.map(&ListItem[model, tui]), selected_index: model.entries.index(model.selected), highlight_symbol: "", highlight_style: tui.style(modifiers: [:reversed]))] ) } Update = -> (message, model) { return model.with(error: ERROR) if message.error? model = model.with(error: nil) if model.error && message.key? if message.ctrl_c? || message.q? then Rooibos::Command.exit elsif message.home? || message.g? then model.with(selected: model.entries.first) elsif message.end? || message.G? then model.with(selected: model.entries.last) elsif message.up_arrow? || message.k? then Select[:-, model] elsif message.down_arrow? || message.j? then Select[:+, model] elsif message.enter? then Open[model] elsif message.escape? then Navigate[File.dirname(model.path), model] end } private # Lines below this are implementation details KEYS = "↑/↓/Home/End: Select | Enter: Open | Esc: Navigate Up | q: Quit" ERROR = "Sorry, opening the selected file failed." ListItem = -> (model, tui) { -> (name) { modifiers = name.start_with?(".") ? [:dim] : [] fg = :blue if name.end_with?("/") tui.list_item(content: name, style: tui.style(fg:, modifiers:)) } } Select = -> (operator, model) { new_index = model.entries.index(model.selected).public_send(operator, 1) model.with(selected: model.entries[new_index.clamp(0, model.entries.length - 1)]) } Open = -> (model) { full = File.join(model.path, model.selected.delete_suffix("/")) model.selected.end_with?("/") ? Navigate[full, model] : Rooibos::Command.open(full) } Navigate = -> (path, model) { entries = Entries[path] model.with(path:, entries:, selected: entries.first, error: nil) } Entries = -> (path) { Dir.children(path).map { |name| File.directory?(File.join(path, name)) ? "#{name}/" : name }.sort_by { |name| [name.end_with?("/") ? 0 : 1, name.downcase] } } end Rooibos.run(FileBrowser) --- === Batteries Included ==== Commands Applications fetch data, run shell commands, and set timers. \Rooibos Commands run off the main thread and send results back as messages. <b>HTTP requests:</b> Update = -> (message, model) { case message in :fetch_users [model.with(loading: true), Rooibos::Command.http(:get, "/api/users", :got_users)] in { type: :http, envelope: :got_users, status: 200, body: } model.with(loading: false, users: JSON.parse(body)) in { type: :http, envelope: :got_users, status: } model.with(error: "HTTP #{status}") end } <b>Shell commands:</b> Update = -> (message, model) { case message in :list_files Rooibos::Command.system("ls -la", :listed_files) in { type: :system, envelope: :listed_files, stdout:, status: 0 } model.with(files: stdout.lines.map(&:chomp)) in { type: :system, envelope: :listed_files, stderr:, status: } model.with(error: stderr) end } <b>Timers:</b> Update = -> (message, model) { case message in { type: :timer, envelope: :tick, elapsed: } [model.with(frame: model.frame + 1), Rooibos::Command.wait(1.0 / 24, :tick)] end } <b>And more!</b> \Rooibos includes <tt>all</tt>, <tt>batch</tt>, <tt>bubble</tt>, <tt>cancel</tt>, <tt>custom</tt>, <tt>deliver</tt>, <tt>exit</tt>, <tt>http</tt>, <tt>map</tt>, <tt>open</tt>, <tt>system</tt>, <tt>tick</tt>, and <tt>wait</tt> commands. You can also define your own custom commands for complex orchestration. Every command produces a message, and Update handles it the same way. ==== Testing \Rooibos makes TUIs so easy to test, you'll save more time by writing tests than by not testing. <b>Unit test Update, View, and Init.</b> No terminal needed. Test helpers included. def test_moves_selection_down_with_j model = Ractor.make_shareable(FileBrowser::Model.new( path: "/", entries: %w[bin exe lib], selected: "bin", error: nil)) message = RatatuiRuby::Event::Key.new(code: "j") result = FileBrowser::Update.call(message, model) assert_equal "exe", result.selected end <b>Style assertions.</b> Draw to a headless terminal, verify colors and modifiers. def test_directories_are_blue with_test_terminal(60, 10) do model = Ractor.make_shareable(FileBrowser::Model.new( path: "/", entries: %w[file.txt subdir/], selected: "file.txt", error: nil)) widget = FileBrowser::View.call(model, RatatuiRuby::TUI.new) RatatuiRuby.draw { |frame| frame.render_widget(widget, frame.area) } assert_blue(1, 2) # "subdir/" at column 1, row 2 end end <b>System tests.</b> Inject events, run the full app, snapshot the result. def test_selection_moves_down with_test_terminal(120, 30) do Dir.mktmpdir do |dir| FileUtils.touch(File.join(dir, "a")) FileUtils.touch(File.join(dir, "b")) FileUtils.touch(File.join(dir, "c")) inject_key(:down) inject_key(:ctrl_c) # Tests use explicit params to inject deterministic initial state. Rooibos.run( model: Ractor.make_shareable(FileBrowser::Model.new( path: dir, entries: %w[a b c], selected: "a", error: nil)), view: FileBrowser::View, update: FileBrowser::Update ) assert_snapshots("selection_moved_down") do |lines| title = "┌/tmp/test#{'─' * 107}┐" lines.map do |l| l.gsub(/┌#{Regexp.escape(dir)}[^┐]*┐/, title) end end end end end Snapshots record both plain text and ANSI colors. Normalization blocks mask dynamic content (timestamps, temp paths) for cross-platform reproducibility. Run <tt>UPDATE_SNAPSHOTS=1 rake test</tt> to regenerate baselines. ==== Scale Up Large applications decompose into fragments. Each fragment has its own Model, View, Update, and Init. Parents compose children. The pattern scales. The Router DSL eliminates boilerplate: module Dashboard include Rooibos::Router route :stats, to: StatsPanel route :network, to: NetworkPanel receive_events :ctrl_c, -> { Rooibos::Command.exit } only when: -> (_message, model) { !model.modal_open } do receive_events :q, -> { Rooibos::Command.exit } forward_events :s, to: :stats, as: :fetch forward_events :p, to: :network, as: :ping end Update = from_router # ... Model, Init, View below end Declare routes and event handlers. The router generates Update for you. Use guards to ignore messages when needed. ==== CLI The <tt>rooibos</tt> command scaffolds projects and runs applications. rooibos new my_app # Generate project structure rooibos run # Run the app in current directory Generated apps include tests, type signatures, and a working welcome screen with keyboard and mouse support. --- === The Ecosystem \Rooibos builds on RatatuiRuby[https://www.ratatui-ruby.dev], a Rubygem built on Ratatui[https://ratatui.rs]. You get native performance with the joy of Ruby. \Rooibos is one way to manage state and composition. Kit is another. ==== Rooibos[https://www.rooibos.run] Model-View-Update architecture. Inspired by Elm, Bubble Tea, and React + Redux. Your UI is a pure function of state. - Functional programming with MVU - Commands work off the main thread - Messages, not callbacks, drive updates ==== {Kit}[https://sr.ht/~kerrick/ratatui_ruby/#chapter-3-the-object-path--kit] (Coming Soon) Component-based architecture. Encapsulate state, input handling, and rendering in reusable pieces. - OOP with stateful components - Separate UI state from domain logic - Built-in focus management & click handling Both use the same widget library and rendering engine. Pick the paradigm that fits your brain. --- === Links [Get Started] {Getting Started}[https://www.rooibos.run/docs/trunk/doc/getting_started/index_md.html], {Tutorial}[https://www.rooibos.run/docs/trunk/doc/tutorial/index_md.html], {Examples}[https://www.rooibos.run/docs/trunk/examples/app_fractal_dashboard/README_md.html] [Coming From...] {React/Redux}[https://www.rooibos.run/docs/trunk/doc/getting_started/for_react_developers_md.html], {BubbleTea}[https://www.rooibos.run/docs/trunk/doc/getting_started/for_go_developers_md.html], {Textual}[https://www.rooibos.run/docs/trunk/doc/getting_started/for_python_developers_md.html] [Learn More] {Essentials}[https://www.rooibos.run/docs/trunk/doc/essentials/index_md.html], {Scaling Up}[https://www.rooibos.run/docs/trunk/doc/scaling_up/index_md.html], {Best Practices}[https://www.rooibos.run/docs/trunk/doc/best_practices/index_md.html], {Troubleshooting}[https://www.rooibos.run/docs/trunk/doc/troubleshooting/index_md.html] [Community] {Forum}[https://forum.setdef.com/c/rooibos], {Announcements}[https://forum.setdef.com/tags/c/rooibos/announcement], {Bug Tracker}[https://forum.setdef.com/tags/c/rooibos/bug], {Contribution Guide}[https://github.com/setdef/Rooibos/blob/trunk/CONTRIBUTING.md], {Code of Conduct}[https://github.com/setdef/Rooibos/blob/trunk/CODE_OF_CONDUCT.md] --- [Website] https://rooibos.run [Source] https://github.com/setdef/Rooibos [RubyGems] https://rubygems.org/gems/rooibos © 2026 Kerrick Long · Library: LGPL-3.0-or-later · Website: CC-BY-NC-ND-4.0 · Snippets: MIT-0

Diff and patch tables

==== Topic Maps for Rails (rtm-rails) RTM-Rails is the Rails-Adapter for Ruby Topic Maps. It allows simple configuration of topicmaps in config/topicmaps.yml. ==== Overview From a developer's perspective, RTM is a schema-less database management system. The Topic Maps standard (described below) on which RTM is based provides a way of creating a self-describing schema just by using it. You can use RTM as a complement data storage to ActiveRecord in your Rails apps. ==== Quickstart - existing Rails project jruby script/generate topicmaps Run the command above after installing rtm-rails. This will create * a minimal default configuration: config/topicmaps.yml and * a file with more examples and explanations config/topicmaps.example.yml * a file README.topicmaps.txt which contains more information how to use it and where to find more information * an initializer to load the topicmaps at startup * a rake task to migrate the topic maps backends in your rails application. ==== Quickstart - new Rails project For a new Rails application these are the complete initial steps: jruby -S rails my_topicmaps_app cd my_topicmaps_app jruby -S script/generate jdbc jruby -S script/generate topicmaps # The following lines are necessary because Rails does not have a template # for the H2 database and Ontopia does not support the Rails default SQLite3. sed -e "s/sqlite3/h2/" config/database.yml > config/database.yml.h2 mv config/database.yml.h2 config/database.yml # Prepare the database and then check if all is OK jruby -S rake topicmaps:migrate_backends jruby -S rake topicmaps:check ==== Usage inside the application When everything is fine, let's create our first topic: jruby -S script/console TM[:example].get!("http://example.org/my/first/topic") # and save the topic map TM[:example].commit Access the configured topic maps anywhere in your application like this: TM[:example] To retrieve all topics, you can do TM[:example].topics To retrieve a specific topic by its subject identifier: TM[:example].get("http://example.org/my/topic") Commit the changes to the database permanently: TM[:example].commit ... or abort the transaction: TM[:example].abort More information can be found on http://rtm.topicmapslab.de/ ==== Minimal configuration default: topicmaps: example: http://rtm.topicmapslab.de/example1/ The minimal configuration creates a single topic map, named :example with the locator given. This topic map will be persisted in the same database as your ActiveRecord connection if not specified otherwise. The default backend is OntopiaRDBMS (from the rtm-ontopia gem). A more complete configuration can be found in config/topicmaps.example.yml after running "jruby script/generate topicmaps". It also includes how to specifiy multiple connections to different data stores and so on. ==== Topic Maps Topic Maps is an international industry standard (ISO13250) for interchangeably representing information about the structure of information resources used to define topics, and the relationships between topics. A set of one or more interrelated documents that employs the notation defined by this International Standard is called a topic map. A topic map defines a multidimensional topic space - a space in which the locations are topics, and in which the distances between topics are measurable in terms of the number of intervening topics which must be visited in order to get from one topic to another, and the kinds of relationships that define the path from one topic to another, if any, through the intervening topics, if any. In addition, information objects can have properties, as well as values for those properties, assigned to them. The Topic Maps Data Model which is used in this implementation can be found on http://www.isotopicmaps.org/sam/sam-model/. ==== License Copyright 2009 Topic Maps Lab, University of Leipzig. Apache License, Version 2.0

= TMail http://tmail.rubyforge.org/ Mikel Lindsaar maintainer Trans assitant developer Minero Aoki original developer == NOTE: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ! THIS IS A FORK OF TMAIL HACKED TOGETHER TO WORK WITH RUBY 1.9.1 ! ! USE AT YOUR OWN DISCRETION ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! == DESCRIPTION: TMail is a mail handling library for Ruby. It abstracts a mail message into a usable object allowing you to read, set, add and delete headers and the mail body. TMail is used by the Ruby on Rails web framework as the Email abstraction layer for their ActionMailer module. It is also used by the Nitro framework and many other applications on and off the web. The goal of the TMail handling library is to be able to parse and handle raw Email sources and produce RFC compliant Emails as a result. If you find something that TMail does that violates an RFC, we want to know and we'll get it fixed fast. == DOCUMENTATION: The place you will want to look first is the TMail::Mail class. This has the vast majority of methods you will be using to talk to your TMail object. == FEATURES/PROBLEMS: TMail is fairly RFC compliant on the handling of emails. There are also some problems in the header handling, but for 99.9% of email, you will be fine. Usually, the problems revolve around parsing incomming emails and making sense of them. I really welcome any examples of Emails that "didn't work" with TMail so I can use them as test cases. == SYNOPSIS: TMail is very easy to use. You simply require the library and then pass a raw email text message into the TMail::Mail.parse method. This returns a TMail::Mail object which you can now query and run methods against to modify, inspect or add to the Email. You can find almost all of the methods that you will use to talk to and update a TMail instance in the TMail::Mail class. I am constantly updating this code, with comments, added a fair bit and have a lot more to go!. === Short Version: irb(main):001:0&gt; require 'tmail' irb(main):002:0&gt; raw_email = File.open("my_raw_email", 'r') { |f| @mail = f.read } irb(main):003:0&gt; email = TMail::Mail.parse(raw_email) irb(main):004:0&gt; puts email['to'] mikel@example.com =&gt; nil irb(main):005:0&gt; email['to'] = 'mikel@somewhere.else.com' =&gt; "mikel@somewhere.else.com" irb(main):006:0&gt; puts email['to'] mikel@somewhere.else.com =&gt; nil === Longer Version: Assuming you have a single raw email in the variable my_message, you can do the following: require 'tmail' email = TMail::Mail.parse(my_message) This will give you a TMail::Mail class containing your parsed message. There are other methods of opening emails through Ports. You can view this email by a simple puts: puts email Return-Path: &lt;mikel@nowhere.com&gt; Date: Sun, 21 Oct 2007 19:38:13 +1000 From: Mikel Lindsaar &lt;mikel@nowhere.com&gt; To: mikel@somewhere.com Message-Id: &lt;009601c813c6$19df3510$0437d30a@mikel091a&gt; Subject: Testing Email Hello Mikel Easy right? === Adding a header to the EMail: Say now that you have opened your message, you want to put in a Reply-To field. You do this like so: email['reply-to'] = "My Email Address &lt;my_address@anotherplace.com&gt;" Is it really there? Well, find out with a puts: puts email Return-Path: &lt;mikel@nowhere.com&gt; Date: Sun, 21 Oct 2007 19:38:13 +1000 From: Mikel Lindsaar &lt;mikel@nowhere.com&gt; Reply-To: My Email Address &lt;my_address@anotherplace.com&gt; To: mikel@somewhere.com Message-Id: &lt;009601c813c6$19df3510$0437d30a@mikel091a&gt; Subject: Testing Email Hello Mikel Yup looks good. === Inspecting a header: You can then inspect your added header by doing: email['reply-to'] # =&gt; #&lt;TMail::AddressHeader "My Email Address &lt;my_address@anotherplace.com&gt;"&gt; If you just want to the actual value, not the AddressHeader object, pass to_s to this. email['reply-to'].to_s # =&gt; "My Email Address &lt;my_address@anotherplace.com&gt;" === Deleting a header: One way of deleting a header from an Email is just assigning it nil like so: email['reply-to'] = nil # =&gt; nil If you now puts the email again, it will not be included: puts email Return-Path: &lt;mikel@nowhere.com&gt; Date: Sun, 21 Oct 2007 19:38:13 +1000 From: Mikel Lindsaar &lt;mikel@nowhere.com&gt; To: mikel@somewhere.com Message-Id: &lt;009601c813c6$19df3510$0437d30a@mikel091a&gt; Subject: Testing Email Hello Mikel === Writing out an Email: You can just call to_s on any email to have it serialized out as a single string with the right number of line breaks and encodings. == CONTRIBUTING: You can visit the {Contributing to TMail}[link:http://tmail.rubyforge.org/contributing/] to find out how to contribute to TMail, developers are welcome and wanted! == REQUIREMENTS: * C compiler if you want the Ruby extension for Scanner * Ruby 1.8 or later == INSTALLATION: * sudo gem install tmail Or manually, * sudo script/setup == LICENSE: (The MIT License) Copyright (c) 2007 FIX Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the 'Software'), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED 'AS IS', WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.