Results for get-param-names

I sometimes get a little descriptive with my variable names, so when you're doing a lot of work specifically with one object, it gets especially ugly and repetetive, making the code harder to read than it needs to be: @contract_participants_on_drugs.contract_id = params[:contract_id] @contract_participants_on_drugs.participant_name = params[:participant_name] @contract_participants_on_drugs.drug_conviction = DrugConvictions.find(:wtf => 'this is getting ridiculous') ... And so on. It gets ridiculous. Utility Belt implements a with(object) method via a change to Object: class Object #utility belt implementation def with(object, &block) object.instance_eval &block end end Unfortunately, that just executes the block in the context of the object, so there isn't any crossover, nor can you perform assignments with attr_accessors (that I was able to do, anyway). So, here's With.object() to fill the void. With.object(@foo) do a = "wtf" b = "this is not as bad" end In the above example, @foo.a and @foo.b are the variables getting set. If you prefer, you can require 'with_on_object' instead and use the notation with(object) do ... end. The tests in the /test directory offer more examples of what's been implemented and tested so far (except where noted - namely performing assignment to a variable that was declared outside the block, and is not on @foo). Not everything is working yet, but it works for the simplest, most common cases I've run up against. More complex tests are on the way, along with code to make them pass. Special thanks to Reg Braithwaite, for help and ideas along the way.

YARD-Heuristics YARD-Heuristics heuristically determines types of parameters and return values for YARD documentation that doesn’t explicitly document it. This allows you to write documentation that isn’t adorned with “obvious” types, but still get that information into the output. It also lets you nice-looking references to parameters and have them be marked up appropriately in HTML output. § Heuristics The following sections list the various heuristics that YARD-Heuristics apply for determining types of parameters and return values. Note that for all heuristics, a type will only be added if none already exists. § Parameter Named “other” A parameter named “other” has the same type as the receiver. This turns class Point def ==(other) into class Point # @param [Point] other def ==(other) § Parameter Types Derived by Parameter Name Parameters to a method with names in the following table has the type listed on the same row. | Name | Type | |--------+-----------| | index | [Integer] | | object | [Object] | | range | [Range] | | string | [String] | Thus class Point def x_inside?(range) becomes class Point # @param [Range] range def x_inside?(range) § Block Parameters If the last parameter to a method’s name begins with ‘&’ it has the type [Proc]. class Method def initialize(&block) becomes class Method # @param [Block] block def initialize(&block) § Return Types by Method Name For the return type of a method with less than two ‹@return› tags, the method name is lookup up in the following table and has the type listed on the same row. For the “type” “self or type”, if a ‹@param› tag exists with the name “other”, the type of the receiver is used, otherwise “self” is used. For the “type” “type”, the type of the receiver is used. | Name | Type | |-----------------+----------------| | ‹<<› | self or type | | ‹>>› | self or type | | ‹==› | [Boolean] | | ‹===› | [Boolean] | | ‹=~› | [Boolean] | | ‹<=>› | [Integer, nil] | | ‹+› | type | | ‹-› | type | | ‹*› | type | | ‹/› | type | | each | [self] | | each_with_index | [self] | | hash | [Integer] | | inspect | [String] | | length | [Integer] | | size | [Integer] | | to_s | [String] | | to_str | [String] | Thus class Point def <<(other) becomes class Point # @return [Point] def <<(other) but class List def <<(item) becomes class List # @return [self] def <<(item) § Emphasizing Parameter Names When producing HTML output, any words in all uppercase, with a possible “th” suffix, that is also the name of a parameter, an ‹@option›, or a ‹@yieldparam›, will be downcased and emphasized with a class of “parameter”. In the following example, “OTHER” will be turned into ‹<em class="parameter">other</em>›: class Point # @return True if the receiver’s class and {#x} and {#y} `#==` those of # OTHER def ==(other) § Usage Add ‹--plugin yard-heuristics-1.0› to your YARD command line. If you’re using Inventory-Rake-Tasks-YARD¹, add the following to your Rakefile: Inventory::Rake::Tasks::YARD.new do |t| t.options += %w'--plugin yard-heuristics-1.0' end ¹ See http://disu.se/software/inventory-rake-tasks-yard/ § API There’s really not very much to the YARD-Heuristics API. What you can do is add (or modify) the types of parameters and return types of methods by adding (or modifying) entries in the Hash tables ‹YARDHeuristics::ParamTypes› and ‹YARDHeuristics::ReturnTypes› respectively. That’s about it. § Financing Currently, most of my time is spent at my day job and in my rather busy private life. Please motivate me to spend time on this piece of software by donating some of your money to this project. Yeah, I realize that requesting money to develop software is a bit, well, capitalistic of me. But please realize that I live in a capitalistic society and I need money to have other people give me the things that I need to continue living under the rules of said society. So, if you feel that this piece of software has helped you out enough to warrant a reward, please PayPal a donation to now@disu.se¹. Thanks! Your support won’t go unnoticed! ¹ Send a donation: https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=now@disu.se&item_name=YARD-Heuristics § Reporting Bugs Please report any bugs that you encounter to the {issue tracker}¹. ¹ See https://github.com/now/yard-heuristics/issues § Authors Nikolai Weibull wrote the code, the tests, and this README. § Licensing YARD-Heuristics is free software: you may redistribute it and/or modify it under the terms of the {GNU Lesser General Public License, version 3}¹ or later², as published by the {Free Software Foundation}³. ¹ See http://disu.se/licenses/lgpl-3.0/ ² See http://gnu.org/licenses/ ³ See http://fsf.org/

GraphQL interface over WCC::Contentful store

# XQuery [](https://gitter.im/JelF/xquery?utm_source=badge&amp;utm_medium=badge&amp;utm_campaign=pr-badge&amp;utm_content=badge) [](https://travis-ci.org/JelF/xquery) [](https://codeclimate.com/github/JelF/xquery) [](https://codeclimate.com/github/JelF/xquery/coverage) [](https://codeclimate.com/github/JelF/xquery) XQuery is designed to replace boring method call chains and allow to easier convert it in a builder classes ## Usage of `XQuery` function `XQuery` is a shortcat to `XQuery::Generic.with` ``` r = XQuery(''.html_safe) do |q| # similar to tap q &lt;&lt; 'bla bla bla' q &lt;&lt; 'bla bla bla' # using truncate q.truncate(15) # real content (q.send(:query)) mutated q &lt;&lt; '!' end r # =&gt; "bla bla blab...!" ``` ## Usage of `XQuery::Abstract` I designed this gem to help me with `ActiveRecord` Queries, so i inherited `XQuery::Abstract` and used it's powers. It provides the following features ### `wrap_method` and `wrap_methods` when you call each of this methods they became automatically wrapped (`XQuery::Abstract` basically wraps all methods query `#respond_to?`) It means, that there are instance methods with same name defined and will change a `#query` to their call result. ``` self.query = query.foo(x) # is basically the same as foo(x) # when `wrap_method :foo` called ``` You can also specify new name using `wrap_method :foo, as: :bar` syntax ### `q` object `q` is a proxy object which holds all of wrapped methods, but not methods you defined inside your class. E.g. i have defined `wrap_method(:foo)`, but also delegated `#foo` to some another object. If i call `q.foo`, i will get wrapped method. Note, that if you redefine `#__foo` method, q.foo will call it instead of normal work. You can add additional methods to `q` using something like `alias_on_q :foo`. I used it with `kaminary` and it was useful ``` def page=(x) apply { |query| query.page(x) } end alias_on_q :page= def page query.current_page end alias_on_q :page ``` ### `query_superclass` You should specify `query_superclass` class_attribute to inherit `XQuery::Abstract`. Whenever `query.is_a?(query_superclass)` evaluate to false, you will get `XQuery::QuerySuperclassChanged` exception. It can save you much time when your class misconfigured. E.g. you are using `select!` and it returns `nil`, because why not? ### `#apply` method `#apply` does exact what it source tells ``` # yields query inside block # @param block [#to_proc] # @return [XQuery::Abstract] self def apply(&amp;block) self.query = block.call(query) self end ``` It is usefull to merge different queries. ### `with` class method You can get XQuery functionality even you have not defined a specific class (You are still have to inherit XQuery::Abstract to use it) You can see it in this document when i described `XQuery` function. Note, that it yields a class instance, not `q` object. It accepts any arguments, they will be passed to a constructor (except block) ### `execute` method Preferred way to call public instance methods. Resulting query would be returned

The Tripletex API is a **RESTful API**, which does not implement PATCH, but uses a PUT with optional fields. **Actions** or commands are represented in our RESTful path with a prefixed `:`. Example: `/v2/hours/123/:approve`. **Summaries** or aggregated results are represented in our RESTful path with a prefixed <code>&gt;</code>. Example: <code>/v2/hours/&gt;thisWeeksBillables</code>. **"requestID"** is a key found in all validation and error responses. If additional log information is absolutely necessary, our support division can locate the key value. **Download** the [swagger.json](/v2/swagger.json) file [OpenAPI Specification](https://github.com/OAI/OpenAPI-Specification) to [generate code](https://github.com/sveredyuk/tripletex_ruby). This document was generated from the Swagger JSON file. **version:** This is a versioning number found on all DB records. If included, it will prevent your PUT/POST from overriding any updates to the record since your GET. **Date & DateTime** follows the **ISO 8601** standard. Date: `YYYY-MM-DD`. DateTime: `YYYY-MM-DDThh:mm:ssZ` **Sorting** is done by specifying a comma separated list, where a `-` prefix denotes descending. You can sort by sub object with the following format: `project.name, -date`. **Searching:** is done by entering values in the optional fields for each API call. The values fall into the following categories: range, in, exact and like. **Missing fields or even no response data** can occur because result objects and fields are filtered on authorization. **See [FAQ](https://tripletex.no/execute/docViewer?articleId=906&language=0) for more additional information.** ## Authentication: - **Tokens:** The Tripletex API uses 3 different tokens - **consumerToken**, **employeeToken** and **sessionToken**. - **consumerToken** is a token provided to the consumer by Tripletex after the API 2.0 registration is completed. - **employeeToken** is a token created by an administrator in your Tripletex account via the user settings and the tab "API access". Each employee token must be given a set of entitlements. [Read more here.](https://tripletex.no/execute/docViewer?articleId=853&language=0) - **sessionToken** is the token from `/token/session/:create` which requires a consumerToken and an employeeToken created with the same consumer token, but not an authentication header. See how to create a sessionToken [here](https://tripletex.no/execute/docViewer?articleId=855&language=0). - The session token is used as the password in "Basic Authentication Header" for API calls. - Use blank or `0` as username for accessing the account with regular employee token, or if a company owned employee token accesses <code>/company/&gt;withLoginAccess</code> or <code>/token/session/&gt;whoAmI</code>. - For company owned employee tokens (accounting offices) the ID from <code>/company/&gt;withLoginAccess</code> can be used as username for accessing client accounts. - If you need to create the header yourself use <code>Authorization: Basic &lt;base64encode('0:sessionToken')&gt;</code>. ## Tags: - <div class="tag-icon-beta"></div> **[BETA]** This is a beta endpoint and can be subject to change. - <div class="tag-icon-deprecated"></div> **[DEPRECATED]** Deprecated means that we intend to remove/change this feature or capability in a future "major" API release. We therefore discourage all use of this feature/capability. ## Fields: Use the `fields` parameter to specify which fields should be returned. This also supports fields from sub elements. Example values: - `project,activity,hours` returns `{project:..., activity:...., hours:...}`. - just `project` returns `"project" : { "id": 12345, "url": "tripletex.no/v2/projects/12345" }`. - `project(*)` returns `"project" : { "id": 12345 "name":"ProjectName" "number.....startDate": "2013-01-07" }`. - `project(name)` returns `"project" : { "name":"ProjectName" }`. - All elements and some subElements : `*,activity(name),employee(*)`. ## Changes: To get the changes for a resource, `changes` have to be explicitly specified as part of the `fields` parameter, e.g. `*,changes`. There are currently two types of change available: - `CREATE` for when the resource was created - `UPDATE` for when the resource was updated NOTE: For objects created prior to October 24th 2018 the list may be incomplete, but will always contain the CREATE and the last change (if the object has been changed after creation). ## Rate limiting in each response header: Rate limiting is performed on the API calls for an employee for each API consumer. Status regarding the rate limit is returned as headers: - `X-Rate-Limit-Limit` - The number of allowed requests in the current period. - `X-Rate-Limit-Remaining` - The number of remaining requests. - `X-Rate-Limit-Reset` - The number of seconds left in the current period. Once the rate limit is hit, all requests will return HTTP status code `429` for the remainder of the current period. ## Response envelope: ``` { "fullResultSize": ###, "from": ###, // Paging starting from "count": ###, // Paging count "versionDigest": "Hash of full result", "values": [...list of objects...] } { "value": {...single object...} } ``` ## WebHook envelope: ``` { "subscriptionId": ###, "event": "object.verb", // As listed from /v2/event/ "id": ###, // Object id "value": {... single object, null if object.deleted ...} } ``` ## Error/warning envelope: ``` { "status": ###, // HTTP status code "code": #####, // internal status code of event "message": "Basic feedback message in your language", "link": "Link to doc", "developerMessage": "More technical message", "validationMessages": [ // Will be null if Error { "field": "Name of field", "message": "Validation failure information" } ], "requestId": "UUID used in any logs" } ``` ## Status codes / Error codes: - **200 OK** - **201 Created** - From POSTs that create something new. - **204 No Content** - When there is no answer, ex: "/:anAction" or DELETE. - **400 Bad request** - - **4000** Bad Request Exception - **11000** Illegal Filter Exception - **12000** Path Param Exception - **24000** Cryptography Exception - **401 Unauthorized** - When authentication is required and has failed or has not yet been provided - **3000** Authentication Exception - **9000** Security Exception - **403 Forbidden** - When AuthorisationManager says no. - **404 Not Found** - For content/IDs that does not exist. - **6000** Not Found Exception - **409 Conflict** - Such as an edit conflict between multiple simultaneous updates - **7000** Object Exists Exception - **8000** Revision Exception - **10000** Locked Exception - **14000** Duplicate entry - **422 Bad Request** - For Required fields or things like malformed payload. - **15000** Value Validation Exception - **16000** Mapping Exception - **17000** Sorting Exception - **18000** Validation Exception - **21000** Param Exception - **22000** Invalid JSON Exception - **23000** Result Set Too Large Exception - **429 Too Many Requests** - Request rate limit hit - **500 Internal Error** - Unexpected condition was encountered and no more specific message is suitable - **1000** Exception

The Tripletex API is a **RESTful API**, which does not implement PATCH, but uses a PUT with optional fields. **Actions** or commands are represented in our RESTful path with a prefixed `:`. Example: `/v2/hours/123/:approve`. **Summaries** or aggregated results are represented in our RESTful path with a prefixed <code>&gt;</code>. Example: <code>/v2/hours/&gt;thisWeeksBillables</code>. **"requestID"** is a key found in all validation and error responses. If additional log information is absolutely necessary, our support division can locate the key value. **Download** the [swagger.json](/v2/swagger.json) file [OpenAPI Specification](https://github.com/OAI/OpenAPI-Specification) to [generate code](https://github.com/swagger-api/swagger-codegen). This document was generated from the Swagger JSON file. **version:** This is a versioning number found on all DB records. If included, it will prevent your PUT/POST from overriding any updates to the record since your GET. **Date & DateTime** follows the **ISO 8601** standard. Date: `YYYY-MM-DD`. DateTime: `YYYY-MM-DDThh:mm:ssZ` **Sorting** is done by specifying a comma separated list, where a `-` prefix denotes descending. You can sort by sub object with the following format: `project.name, -date`. **Searching:** is done by entering values in the optional fields for each API call. The values fall into the following categories: range, in, exact and like. **Missing fields or even no response data** can occur because result objects and fields are filtered on authorization. **See [FAQ](https://tripletex.no/execute/docViewer?articleId=906&language=0) for more additional information.** ## Authentication: - **Tokens:** The Tripletex API uses 3 different tokens - **consumerToken**, **employeeToken** and **sessionToken**. - **consumerToken** is a token provided to the consumer by Tripletex after the API 2.0 registration is completed. - **employeeToken** is a token created by an administrator in your Tripletex account via the user settings and the tab "API access". Each employee token must be given a set of entitlements. [Read more here.](https://tripletex.no/execute/docViewer?articleId=853&language=0) - **sessionToken** is the token from `/token/session/:create` which requires a consumerToken and an employeeToken created with the same consumer token, but not an authentication header. See how to create a sessionToken [here](https://tripletex.no/execute/docViewer?articleId=855&language=0). - The session token is used as the password in "Basic Authentication Header" for API calls. - Use blank or `0` as username for accessing the account with regular employee token, or if a company owned employee token accesses <code>/company/&gt;withLoginAccess</code> or <code>/token/session/&gt;whoAmI</code>. - For company owned employee tokens (accounting offices) the ID from <code>/company/&gt;withLoginAccess</code> can be used as username for accessing client accounts. - If you need to create the header yourself use <code>Authorization: Basic &lt;base64encode('0:sessionToken')&gt;</code>. ## Tags: - <div class="tag-icon-beta"></div> **[BETA]** This is a beta endpoint and can be subject to change. - <div class="tag-icon-deprecated"></div> **[DEPRECATED]** Deprecated means that we intend to remove/change this feature or capability in a future "major" API release. We therefore discourage all use of this feature/capability. ## Fields: Use the `fields` parameter to specify which fields should be returned. This also supports fields from sub elements. Example values: - `project,activity,hours` returns `{project:..., activity:...., hours:...}`. - just `project` returns `"project" : { "id": 12345, "url": "tripletex.no/v2/projects/12345" }`. - `project(*)` returns `"project" : { "id": 12345 "name":"ProjectName" "number.....startDate": "2013-01-07" }`. - `project(name)` returns `"project" : { "name":"ProjectName" }`. - All elements and some subElements : `*,activity(name),employee(*)`. ## Changes: To get the changes for a resource, `changes` have to be explicitly specified as part of the `fields` parameter, e.g. `*,changes`. There are currently two types of change available: - `CREATE` for when the resource was created - `UPDATE` for when the resource was updated NOTE: For objects created prior to October 24th 2018 the list may be incomplete, but will always contain the CREATE and the last change (if the object has been changed after creation). ## Rate limiting in each response header: Rate limiting is performed on the API calls for an employee for each API consumer. Status regarding the rate limit is returned as headers: - `X-Rate-Limit-Limit` - The number of allowed requests in the current period. - `X-Rate-Limit-Remaining` - The number of remaining requests. - `X-Rate-Limit-Reset` - The number of seconds left in the current period. Once the rate limit is hit, all requests will return HTTP status code `429` for the remainder of the current period. ## Response envelope: ``` { "fullResultSize": ###, "from": ###, // Paging starting from "count": ###, // Paging count "versionDigest": "Hash of full result", "values": [...list of objects...] } { "value": {...single object...} } ``` ## WebHook envelope: ``` { "subscriptionId": ###, "event": "object.verb", // As listed from /v2/event/ "id": ###, // Object id "value": {... single object, null if object.deleted ...} } ``` ## Error/warning envelope: ``` { "status": ###, // HTTP status code "code": #####, // internal status code of event "message": "Basic feedback message in your language", "link": "Link to doc", "developerMessage": "More technical message", "validationMessages": [ // Will be null if Error { "field": "Name of field", "message": "Validation failure information" } ], "requestId": "UUID used in any logs" } ``` ## Status codes / Error codes: - **200 OK** - **201 Created** - From POSTs that create something new. - **204 No Content** - When there is no answer, ex: "/:anAction" or DELETE. - **400 Bad request** - - **4000** Bad Request Exception - **11000** Illegal Filter Exception - **12000** Path Param Exception - **24000** Cryptography Exception - **401 Unauthorized** - When authentication is required and has failed or has not yet been provided - **3000** Authentication Exception - **9000** Security Exception - **403 Forbidden** - When AuthorisationManager says no. - **404 Not Found** - For content/IDs that does not exist. - **6000** Not Found Exception - **409 Conflict** - Such as an edit conflict between multiple simultaneous updates - **7000** Object Exists Exception - **8000** Revision Exception - **10000** Locked Exception - **14000** Duplicate entry - **422 Bad Request** - For Required fields or things like malformed payload. - **15000** Value Validation Exception - **16000** Mapping Exception - **17000** Sorting Exception - **18000** Validation Exception - **21000** Param Exception - **22000** Invalid JSON Exception - **23000** Result Set Too Large Exception - **429 Too Many Requests** - Request rate limit hit - **500 Internal Error** - Unexpected condition was encountered and no more specific message is suitable - **1000** Exception

The Tripletex API is a **RESTful API**, which does not implement PATCH, but uses a PUT with optional fields. **Actions** or commands are represented in our RESTful path with a prefixed `:`. Example: `/v2/hours/123/:approve`. **Summaries** or aggregated results are represented in our RESTful path with a prefixed <code>&gt;</code>. Example: <code>/v2/hours/&gt;thisWeeksBillables</code>. **"requestID"** is a key found in all validation and error responses. If additional log information is absolutely necessary, our support division can locate the key value. **Download** the [swagger.json](/v2/swagger.json) file [OpenAPI Specification](https://github.com/OAI/OpenAPI-Specification) to [generate code](https://github.com/sveredyuk/tripletex_ruby). This document was generated from the Swagger JSON file. **version:** This is a versioning number found on all DB records. If included, it will prevent your PUT/POST from overriding any updates to the record since your GET. **Date & DateTime** follows the **ISO 8601** standard. Date: `YYYY-MM-DD`. DateTime: `YYYY-MM-DDThh:mm:ssZ` **Sorting** is done by specifying a comma separated list, where a `-` prefix denotes descending. You can sort by sub object with the following format: `project.name, -date`. **Searching:** is done by entering values in the optional fields for each API call. The values fall into the following categories: range, in, exact and like. **Missing fields or even no response data** can occur because result objects and fields are filtered on authorization. **See [FAQ](https://tripletex.no/execute/docViewer?articleId=906&language=0) for more additional information.** ## Authentication: - **Tokens:** The Tripletex API uses 3 different tokens - **consumerToken**, **employeeToken** and **sessionToken**. - **consumerToken** is a token provided to the consumer by Tripletex after the API 2.0 registration is completed. - **employeeToken** is a token created by an administrator in your Tripletex account via the user settings and the tab "API access". Each employee token must be given a set of entitlements. [Read more here.](https://tripletex.no/execute/docViewer?articleId=853&language=0) - **sessionToken** is the token from `/token/session/:create` which requires a consumerToken and an employeeToken created with the same consumer token, but not an authentication header. See how to create a sessionToken [here](https://tripletex.no/execute/docViewer?articleId=855&language=0). - The session token is used as the password in "Basic Authentication Header" for API calls. - Use blank or `0` as username for accessing the account with regular employee token, or if a company owned employee token accesses <code>/company/&gt;withLoginAccess</code> or <code>/token/session/&gt;whoAmI</code>. - For company owned employee tokens (accounting offices) the ID from <code>/company/&gt;withLoginAccess</code> can be used as username for accessing client accounts. - If you need to create the header yourself use <code>Authorization: Basic &lt;base64encode('0:sessionToken')&gt;</code>. ## Tags: - <div class="tag-icon-beta"></div> **[BETA]** This is a beta endpoint and can be subject to change. - <div class="tag-icon-deprecated"></div> **[DEPRECATED]** Deprecated means that we intend to remove/change this feature or capability in a future "major" API release. We therefore discourage all use of this feature/capability. ## Fields: Use the `fields` parameter to specify which fields should be returned. This also supports fields from sub elements. Example values: - `project,activity,hours` returns `{project:..., activity:...., hours:...}`. - just `project` returns `"project" : { "id": 12345, "url": "tripletex.no/v2/projects/12345" }`. - `project(*)` returns `"project" : { "id": 12345 "name":"ProjectName" "number.....startDate": "2013-01-07" }`. - `project(name)` returns `"project" : { "name":"ProjectName" }`. - All elements and some subElements : `*,activity(name),employee(*)`. ## Changes: To get the changes for a resource, `changes` have to be explicitly specified as part of the `fields` parameter, e.g. `*,changes`. There are currently two types of change available: - `CREATE` for when the resource was created - `UPDATE` for when the resource was updated NOTE: For objects created prior to October 24th 2018 the list may be incomplete, but will always contain the CREATE and the last change (if the object has been changed after creation). ## Rate limiting in each response header: Rate limiting is performed on the API calls for an employee for each API consumer. Status regarding the rate limit is returned as headers: - `X-Rate-Limit-Limit` - The number of allowed requests in the current period. - `X-Rate-Limit-Remaining` - The number of remaining requests. - `X-Rate-Limit-Reset` - The number of seconds left in the current period. Once the rate limit is hit, all requests will return HTTP status code `429` for the remainder of the current period. ## Response envelope: ``` { "fullResultSize": ###, "from": ###, // Paging starting from "count": ###, // Paging count "versionDigest": "Hash of full result", "values": [...list of objects...] } { "value": {...single object...} } ``` ## WebHook envelope: ``` { "subscriptionId": ###, "event": "object.verb", // As listed from /v2/event/ "id": ###, // Object id "value": {... single object, null if object.deleted ...} } ``` ## Error/warning envelope: ``` { "status": ###, // HTTP status code "code": #####, // internal status code of event "message": "Basic feedback message in your language", "link": "Link to doc", "developerMessage": "More technical message", "validationMessages": [ // Will be null if Error { "field": "Name of field", "message": "Validation failure information" } ], "requestId": "UUID used in any logs" } ``` ## Status codes / Error codes: - **200 OK** - **201 Created** - From POSTs that create something new. - **204 No Content** - When there is no answer, ex: "/:anAction" or DELETE. - **400 Bad request** - - **4000** Bad Request Exception - **11000** Illegal Filter Exception - **12000** Path Param Exception - **24000** Cryptography Exception - **401 Unauthorized** - When authentication is required and has failed or has not yet been provided - **3000** Authentication Exception - **9000** Security Exception - **403 Forbidden** - When AuthorisationManager says no. - **404 Not Found** - For content/IDs that does not exist. - **6000** Not Found Exception - **409 Conflict** - Such as an edit conflict between multiple simultaneous updates - **7000** Object Exists Exception - **8000** Revision Exception - **10000** Locked Exception - **14000** Duplicate entry - **422 Bad Request** - For Required fields or things like malformed payload. - **15000** Value Validation Exception - **16000** Mapping Exception - **17000** Sorting Exception - **18000** Validation Exception - **21000** Param Exception - **22000** Invalid JSON Exception - **23000** Result Set Too Large Exception - **429 Too Many Requests** - Request rate limit hit - **500 Internal Error** - Unexpected condition was encountered and no more specific message is suitable - **1000** Exception

== Confidently Build Terminal Apps Rooibos[https://rooibos.run] helps you build interactive terminal applications. Keep your code understandable and testable as it scales. Rooibos handles keyboard, mouse, and async work so you can focus on behavior and user experience. gem install rooibos <i>Currently in beta. APIs may change before 1.0.</i> === Get Started in Seconds rooibos new my_app cd my_app rooibos run That's it. You have a working app with keyboard navigation, mouse support, and clickable buttons. Open <tt>lib/my_app.rb</tt> to make it your own. --- === The Pattern \Rooibos uses Model-View-Update, the architecture behind Elm[https://guide.elm-lang.org/architecture/], Redux[https://redux.js.org/], and {Bubble Tea}[https://github.com/charmbracelet/bubbletea]. State lives in one place. Updates flow in one direction. The runtime handles rendering and runs background work for you. --- === Hello, MVU The simplest \Rooibos app. Press any key to increment the counter. Press <tt>Ctrl</tt>+<tt>C</tt> to quit. require "rooibos" module Counter # Init: How do you create the initial model? Init = -> { 0 } # View: What does the user see? View = -> (model, tui) { tui.paragraph(text: <<~END) } Current count: #{model}. Press any key to increment. Press Ctrl+C to quit. END # Update: What happens when things change? Update = -> (message, model) { if message.ctrl_c? Rooibos::Command.exit elsif message.key? model + 1 end } end Rooibos.run(Counter) That's the whole pattern: Model holds state, Init creates it, View renders it, and Update changes it. The runtime handles everything else. --- === Your First Real Application A file browser in sixty lines. It opens files, navigates directories, handles errors, styles directories and hidden files differently, and supports vim-style keyboard shortcuts. If you can do this much with this little code, imagine how easy _your_ app will be to build. require "rooibos" module FileBrowser # Model: What state does your app need? Model = Data.define(:path, :entries, :selected, :error) Init = -> { path = Dir.pwd entries = Entries[path] Ractor.make_shareable( # Ensures thread safety Model.new(path:, entries:, selected: entries.first, error: nil)) } View = -> (model, tui) { tui.block( titles: [model.error || model.path, { content: KEYS, position: :bottom, alignment: :right}], borders: [:all], border_style: if model.error then tui.style(fg: :red) else nil end, children: [tui.list(items: model.entries.map(&ListItem[model, tui]), selected_index: model.entries.index(model.selected), highlight_symbol: "", highlight_style: tui.style(modifiers: [:reversed]))] ) } Update = -> (message, model) { return model.with(error: ERROR) if message.error? model = model.with(error: nil) if model.error && message.key? if message.ctrl_c? || message.q? then Rooibos::Command.exit elsif message.home? || message.g? then model.with(selected: model.entries.first) elsif message.end? || message.G? then model.with(selected: model.entries.last) elsif message.up_arrow? || message.k? then Select[:-, model] elsif message.down_arrow? || message.j? then Select[:+, model] elsif message.enter? then Open[model] elsif message.escape? then Navigate[File.dirname(model.path), model] end } private # Lines below this are implementation details KEYS = "↑/↓/Home/End: Select | Enter: Open | Esc: Navigate Up | q: Quit" ERROR = "Sorry, opening the selected file failed." ListItem = -> (model, tui) { -> (name) { modifiers = name.start_with?(".") ? [:dim] : [] fg = :blue if name.end_with?("/") tui.list_item(content: name, style: tui.style(fg:, modifiers:)) } } Select = -> (operator, model) { new_index = model.entries.index(model.selected).public_send(operator, 1) model.with(selected: model.entries[new_index.clamp(0, model.entries.length - 1)]) } Open = -> (model) { full = File.join(model.path, model.selected.delete_suffix("/")) model.selected.end_with?("/") ? Navigate[full, model] : Rooibos::Command.open(full) } Navigate = -> (path, model) { entries = Entries[path] model.with(path:, entries:, selected: entries.first, error: nil) } Entries = -> (path) { Dir.children(path).map { |name| File.directory?(File.join(path, name)) ? "#{name}/" : name }.sort_by { |name| [name.end_with?("/") ? 0 : 1, name.downcase] } } end Rooibos.run(FileBrowser) --- === Batteries Included ==== Commands Applications fetch data, run shell commands, and set timers. \Rooibos Commands run off the main thread and send results back as messages. <b>HTTP requests:</b> Update = -> (message, model) { case message in :fetch_users [model.with(loading: true), Rooibos::Command.http(:get, "/api/users", :got_users)] in { type: :http, envelope: :got_users, status: 200, body: } model.with(loading: false, users: JSON.parse(body)) in { type: :http, envelope: :got_users, status: } model.with(error: "HTTP #{status}") end } <b>Shell commands:</b> Update = -> (message, model) { case message in :list_files Rooibos::Command.system("ls -la", :listed_files) in { type: :system, envelope: :listed_files, stdout:, status: 0 } model.with(files: stdout.lines.map(&:chomp)) in { type: :system, envelope: :listed_files, stderr:, status: } model.with(error: stderr) end } <b>Timers:</b> Update = -> (message, model) { case message in { type: :timer, envelope: :tick, elapsed: } [model.with(frame: model.frame + 1), Rooibos::Command.wait(1.0 / 24, :tick)] end } <b>And more!</b> \Rooibos includes <tt>all</tt>, <tt>batch</tt>, <tt>bubble</tt>, <tt>cancel</tt>, <tt>custom</tt>, <tt>deliver</tt>, <tt>exit</tt>, <tt>http</tt>, <tt>map</tt>, <tt>open</tt>, <tt>system</tt>, <tt>tick</tt>, and <tt>wait</tt> commands. You can also define your own custom commands for complex orchestration. Every command produces a message, and Update handles it the same way. ==== Testing \Rooibos makes TUIs so easy to test, you'll save more time by writing tests than by not testing. <b>Unit test Update, View, and Init.</b> No terminal needed. Test helpers included. def test_moves_selection_down_with_j model = Ractor.make_shareable(FileBrowser::Model.new( path: "/", entries: %w[bin exe lib], selected: "bin", error: nil)) message = RatatuiRuby::Event::Key.new(code: "j") result = FileBrowser::Update.call(message, model) assert_equal "exe", result.selected end <b>Style assertions.</b> Draw to a headless terminal, verify colors and modifiers. def test_directories_are_blue with_test_terminal(60, 10) do model = Ractor.make_shareable(FileBrowser::Model.new( path: "/", entries: %w[file.txt subdir/], selected: "file.txt", error: nil)) widget = FileBrowser::View.call(model, RatatuiRuby::TUI.new) RatatuiRuby.draw { |frame| frame.render_widget(widget, frame.area) } assert_blue(1, 2) # "subdir/" at column 1, row 2 end end <b>System tests.</b> Inject events, run the full app, snapshot the result. def test_selection_moves_down with_test_terminal(120, 30) do Dir.mktmpdir do |dir| FileUtils.touch(File.join(dir, "a")) FileUtils.touch(File.join(dir, "b")) FileUtils.touch(File.join(dir, "c")) inject_key(:down) inject_key(:ctrl_c) # Tests use explicit params to inject deterministic initial state. Rooibos.run( model: Ractor.make_shareable(FileBrowser::Model.new( path: dir, entries: %w[a b c], selected: "a", error: nil)), view: FileBrowser::View, update: FileBrowser::Update ) assert_snapshots("selection_moved_down") do |lines| title = "┌/tmp/test#{'─' * 107}┐" lines.map do |l| l.gsub(/┌#{Regexp.escape(dir)}[^┐]*┐/, title) end end end end end Snapshots record both plain text and ANSI colors. Normalization blocks mask dynamic content (timestamps, temp paths) for cross-platform reproducibility. Run <tt>UPDATE_SNAPSHOTS=1 rake test</tt> to regenerate baselines. ==== Scale Up Large applications decompose into fragments. Each fragment has its own Model, View, Update, and Init. Parents compose children. The pattern scales. The Router DSL eliminates boilerplate: module Dashboard include Rooibos::Router route :stats, to: StatsPanel route :network, to: NetworkPanel receive_events :ctrl_c, -> { Rooibos::Command.exit } only when: -> (_message, model) { !model.modal_open } do receive_events :q, -> { Rooibos::Command.exit } forward_events :s, to: :stats, as: :fetch forward_events :p, to: :network, as: :ping end Update = from_router # ... Model, Init, View below end Declare routes and event handlers. The router generates Update for you. Use guards to ignore messages when needed. ==== CLI The <tt>rooibos</tt> command scaffolds projects and runs applications. rooibos new my_app # Generate project structure rooibos run # Run the app in current directory Generated apps include tests, type signatures, and a working welcome screen with keyboard and mouse support. --- === The Ecosystem \Rooibos builds on RatatuiRuby[https://www.ratatui-ruby.dev], a Rubygem built on Ratatui[https://ratatui.rs]. You get native performance with the joy of Ruby. \Rooibos is one way to manage state and composition. Kit is another. ==== Rooibos[https://www.rooibos.run] Model-View-Update architecture. Inspired by Elm, Bubble Tea, and React + Redux. Your UI is a pure function of state. - Functional programming with MVU - Commands work off the main thread - Messages, not callbacks, drive updates ==== {Kit}[https://sr.ht/~kerrick/ratatui_ruby/#chapter-3-the-object-path--kit] (Coming Soon) Component-based architecture. Encapsulate state, input handling, and rendering in reusable pieces. - OOP with stateful components - Separate UI state from domain logic - Built-in focus management & click handling Both use the same widget library and rendering engine. Pick the paradigm that fits your brain. --- === Links [Get Started] {Getting Started}[https://www.rooibos.run/docs/trunk/doc/getting_started/index_md.html], {Tutorial}[https://www.rooibos.run/docs/trunk/doc/tutorial/index_md.html], {Examples}[https://www.rooibos.run/docs/trunk/examples/app_fractal_dashboard/README_md.html] [Coming From...] {React/Redux}[https://www.rooibos.run/docs/trunk/doc/getting_started/for_react_developers_md.html], {BubbleTea}[https://www.rooibos.run/docs/trunk/doc/getting_started/for_go_developers_md.html], {Textual}[https://www.rooibos.run/docs/trunk/doc/getting_started/for_python_developers_md.html] [Learn More] {Essentials}[https://www.rooibos.run/docs/trunk/doc/essentials/index_md.html], {Scaling Up}[https://www.rooibos.run/docs/trunk/doc/scaling_up/index_md.html], {Best Practices}[https://www.rooibos.run/docs/trunk/doc/best_practices/index_md.html], {Troubleshooting}[https://www.rooibos.run/docs/trunk/doc/troubleshooting/index_md.html] [Community] {Forum}[https://forum.setdef.com/c/rooibos], {Announcements}[https://forum.setdef.com/tags/c/rooibos/announcement], {Bug Tracker}[https://forum.setdef.com/tags/c/rooibos/bug], {Contribution Guide}[https://github.com/setdef/Rooibos/blob/trunk/CONTRIBUTING.md], {Code of Conduct}[https://github.com/setdef/Rooibos/blob/trunk/CODE_OF_CONDUCT.md] --- [Website] https://rooibos.run [Source] https://github.com/setdef/Rooibos [RubyGems] https://rubygems.org/gems/rooibos © 2026 Kerrick Long · Library: LGPL-3.0-or-later · Website: CC-BY-NC-ND-4.0 · Snippets: MIT-0

Contentful API wrapper library exposing an ActiveRecord-like interface

No description provided.