Results for get-stdin

A clock/bulletin board with a STDIN interface. It's up to the user to wrap `gtk2clockapp` to provide additional functionality besides the clock. It assumes it'll get weather info, spot prices, and alerts... but one can put anything in those labels.

use css2sass(in command prompt) with the following arguments the format to convert : SASS(default) or SCSS followed by input filename.css followed by output filename.scss/sass or you can use stdin to convert to css and ctrl+z to end the input and get the output in stdout

Send commands through SSH, but using a tty/pty and STDIN. That's right: Interactive SSH sessions. **Note:** Programs that redraw the screen (e.g. vim) don't work that well. Apt-get and other programs that request input in a simple manner should work well enough.

use css2sass(in command prompt) with the following arguments the format to convert -> SASS(default) or SCSS followed by input filename.css followed by output filename.scss/sass or you can use stdin to convert to css and ctrl+z to end the input and get the output in stdout

= Mcrypt - libmcrypt bindings for Ruby Mcrypt provides Ruby-language bindings for libmcrypt(3), a symmetric cryptography library. {Libmcrypt}[http://mcrypt.sourceforge.net/] supports lots of different ciphers and encryption modes. == You will need * A working Ruby installation (>= 1.8.6 or 1.9) * A working libmcrypt installation (2.5.x or 2.6.x, tested with 2.5.8) * A sane build environment == Installation Install the gem: gem install ruby-mcrypt --test -- --with-mcrypt-dir=/path/to/mcrypt/prefix If you're installing on Ubuntu: sudo apt-get install mcrypt libmcrypt-dev gem install ruby-mcrypt If you want to run the longer test suite, do this instead: MCRYPT_TEST_BRUTE=1 \ gem install ruby-mcrypt --test -- --with-mcrypt-dir=/path/to/mcrypt/prefix Put this in your code: require 'rubygems' require 'mcrypt' Or in Rails' environment.rb: gem "ruby-mcrypt", :lib => "mcrypt" == Usage crypto = Mcrypt.new(:twofish, :cbc, MY_KEY, MY_IV, :pkcs) # encryption and decryption in one step ciphertext = crypto.encrypt(plaintext) plaintext = crypto.decrypt(ciphertext) # encrypt in smaller steps while chunk = $stdin.read(4096) $stdout << crypto.encrypt_more(chunk) end $stdout << crypto.encrypt_finish # or decrypt: while chunk = $stdin.read(4096) $stdout << crypto.decrypt_more(chunk) end $stdout << crypto.decrypt_finish == Known Issues * Test coverage is lacking. If you find any bugs, please let the author know. == Wish List * IO-like behavior, e.g. crypto.open($stdin) { |stream| ... } == Author * Philip Garrett <philgarr at gmail.com> == Copyright and License Copyright (c) 2009-2013 Philip Garrett. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Sym is a ruby library (gem) that offers both the command line interface (CLI) and a set of rich Ruby APIs, which make it rather trivial to add encryption and decryption of sensitive data to your development or deployment workflow. For additional security the private key itself can be encrypted with a user-generated password. For decryption using the key the password can be input into STDIN, or be defined by an ENV variable, or an OS-X Keychain Entry. Unlike many other existing encryption tools, Sym focuses on getting out of your way by offering a streamlined interface with password caching (if MemCached is installed and running locally) in hopes to make encryption of application secrets nearly completely transparent to the developers. Sym uses symmetric 256-bit key encryption with the AES-256-CBC cipher, same cipher as used by the US Government. For password-protecting the key Sym uses AES-128-CBC cipher. The resulting data is zlib-compressed and base64-encoded. The keys are also base64 encoded for easy copying/pasting/etc. Sym accomplishes encryption transparency by combining several convenient features: 1. Sym can read the private key from multiple source types, such as pathname, an environment variable name, a keychain entry, or CLI argument. You simply pass either of these to the -k flag — one flag that works for all source types. 2. By utilizing OS-X Keychain on a Mac, Sym offers truly secure way of storing the key on a local machine, much more secure then storing it on a file system, 3. By using a local password cache (activated with -c) via an in-memory provider such as memcached, sym invocations take advantage of password cache, and only ask for a password once per a configurable time period, 4. By using SYM_ARGS environment variable, where common flags can be saved. This is activated with sym -A, 5. By reading the key from the default key source file ~/.sym.key which requires no flags at all, 6. By utilizing the --negate option to quickly encrypt a regular file, or decrypt an encrypted file with extension .enc 7. By implementing the -t (edit) mode, that opens an encrypted file in your $EDITOR, and replaces the encrypted version upon save & exit, optionally creating a backup. 8. By offering the Sym::MagicFile ruby API to easily read encrypted files into memory. Please refer the module documentation available here: https://www.rubydoc.info/gems/sym

Log2json lets you read, filter and send logs as JSON objects via Unix pipes. It is inspired by Logstash, and is meant to be compatible with it at the JSON event/record level so that it can easily work with Kibana. Reading logs is done via a shell script(eg, `tail`) running in its own process. You then configure(see the `syslog2json` or the `nginxlog2json` script for examples) and run your filters in Ruby using the `Log2Json` module and its contained helper classes. `Log2Json` reads from stdin the logs(one log record per line), parses the log lines into JSON records, and then serializes and writes the records to stdout, which then can be piped to another process for processing or sending it to somewhere else. Currently, Log2json ships with a `tail-log` script that can be run as the input process. It's the same as using the Linux `tail` utility with the `-v -F` options except that it also tracks the positions(as the numbers of lines read from the beginning of the files) in a few files in the file system so that if the input process is interrupted, it can continue reading from where it left off next time if the files had been followed. This feature is similar to the sincedb feature in Logstash's file input. Note: If you don't need the tracking feature(ie, you are fine with always tailling from the end of file with `-v -F -n0`), then you can just use the `tail` utility that comes with your Linux distribution.(Or more specifically, the `tail` from the GNU coreutils). Other versions of the `tail` utility may also work, but are not tested. The input protocol expected by Log2json is very simple and documented in the source code. ** The `tail-log` script uses a patched version of `tail` from the GNU coreutils package. A binary of the `tail` utility compiled for Ubuntu 12.04 LTS is included with the Log2json gem. If the binary doesn't work for your distribution, then you'll need to get GNU coreutils-8.13, apply the patch(it can be found in the src/ directory of the installed gem), and then replace the bin/tail binary in the directory of the installed gem with your version of the binary. ** P.S. If you know of a way to configure and compile ONLY the tail program in coreutils, please let me know! The reason I'm not building tail post gem installation is that it takes too long to configure &amp;&amp; make because that actually builds every utilties in coreutils. For shipping logs to Redis, there's the `lines2redis` script that can be used as the output process in the pipe. For shipping logs from Redis to ElasticSearch, Log2json provides a `redis2es` script. Finally here's an example of Log2json in action: From a client machine: tail-log /var/log/{sys,mail}log /var/log/{kern,auth}.log | syslog2json | queue=jsonlogs \ flush_size=20 \ flush_interval=30 \ lines2redis host.to.redis.server 6379 0 # use redis DB 0 On the Redis server: redis_queue=jsonlogs redis2es host.to.es.server Resources that help writing log2json filters: - look at log2json.rb source and example filters - http://grokdebug.herokuapp.com/ - http://www.ruby-doc.org/stdlib-1.9.3/libdoc/date/rdoc/DateTime.html#method-i-strftime

Log2json lets you read, filter and send logs as JSON objects via Unix pipes. It is inspired by Logstash, and is meant to be compatible with it at the JSON event/record level so that it can easily work with Kibana. Reading logs is done via a shell script(eg, `tail`) running in its own process. You then configure(see the `syslog2json` or the `nginxlog2json` script for examples) and run your filters in Ruby using the `Log2Json` module and its contained helper classes. `Log2Json` reads from stdin the logs(one log record per line), parses the log lines into JSON records, and then serializes and writes the records to stdout, which then can be piped to another process for processing or sending it to somewhere else. Currently, Log2json ships with a `tail-log` script that can be run as the input process. It's the same as using the Linux `tail` utility with the `-v -F` options except that it also tracks the positions(as the numbers of lines read from the beginning of the files) in a few files in the file system so that if the input process is interrupted, it can continue reading from where it left off next time if the files had been followed. This feature is similar to the sincedb feature in Logstash's file input. Note: If you don't need the tracking feature(ie, you are fine with always tailling from the end of file with `-v -F -n0`), then you can just use the `tail` utility that comes with your Linux distribution.(Or more specifically, the `tail` from the GNU coreutils). Other versions of the `tail` utility may also work, but are not tested. The input protocol expected by Log2json is very simple and documented in the source code. ** The `tail-log` script uses a patched version of `tail` from the GNU coreutils package. A binary of the `tail` utility compiled for Ubuntu 12.04 LTS is included with the Log2json gem. If the binary doesn't work for your distribution, then you'll need to get GNU coreutils-8.13, apply the patch(it can be found in the src/ directory of the installed gem), and then replace the bin/tail binary in the directory of the installed gem with your version of the binary. ** P.S. If you know of a way to configure and compile ONLY the tail program in coreutils, please let me know! The reason I'm not building tail post gem installation is that it takes too long to configure && make because that actually builds every utilties in coreutils. For shipping logs to Redis, there's the `lines2redis` script that can be used as the output process in the pipe. For shipping logs from Redis to ElasticSearch, Log2json provides a `redis2es` script. Finally here's an example of Log2json in action: From a client machine: tail-log /var/log/{sys,mail}log /var/log/{kern,auth}.log | syslog2json | queue=jsonlogs \ flush_size=20 \ flush_interval=30 \ lines2redis host.to.redis.server 6379 0 # use redis DB 0 On the Redis server: redis_queue=jsonlogs redis2es host.to.es.server Resources that help writing log2json filters: - look at log2json.rb source and example filters - http://grokdebug.herokuapp.com/ - http://www.ruby-doc.org/stdlib-1.9.3/libdoc/date/rdoc/DateTime.html#method-i-strftime

No description provided.

No description provided.

No description provided.

No description provided.