Results for github-git-setup

# DnsChecker Welcome to your new gem! In this directory, you'll find the files you need to be able to package up your Ruby library into a gem. Put your Ruby code in the file `lib/dns_checker`. To experiment with that code, run `bin/console` for an interactive prompt. ## Installation Add this line to your application's Gemfile: ```ruby gem 'dns_checker' ``` And then execute: $ bundle Or install it yourself as: $ gem install dns_checker ## Usage Just use it! ## Development After checking out the repo, run `bin/setup` to install dependencies. Then, run `rake spec` to run the tests. You can also run `bin/console` for an interactive prompt that will allow you to experiment. To install this gem onto your local machine, run `bundle exec rake install`. To release a new version, update the version number in `version.rb`, and then run `bundle exec rake release`, which will create a git tag for the version, push git commits and tags, and push the `.gem` file to [rubygems.org](https://rubygems.org). ## Contributing Bug reports and pull requests are welcome on GitHub at https://github.com/[USERNAME]/dns_checker. This project is intended to be a safe, welcoming space for collaboration, and contributors are expected to adhere to the [Contributor Covenant](contributor-covenant.org) code of conduct. ## License The gem is available as open source under the terms of the [MIT License](http://opensource.org/licenses/MIT).

# CheckTCPMemory This is a simple Nagios/Sensu check that checks that the current TCP memory usage is below the maximum allowed in the Linux kernel. This will find leaking TCP sockets. ## Installation Add this line to your application's Gemfile: ```ruby gem 'check_tcp_memory' ``` And then execute: $ bundle Or install it yourself as: $ gem install check_tcp_memory ## Usage ``` $ check_tcp_memory -h Usage: check_tcp_memory -w <warn percent> -c <critical percent> -w, --warn-percent PERCENT Warning when percentage of total TCP memory is over this threashold. Default: 50% -c, --crit-percent PERCENT Critical when percentage of total TCP memory is over this threashold. Default: 60% -h, --help Show this message --version Show version ``` ## Development After checking out the repo, run `bin/setup` to install dependencies. Then, run `rake spec` to run the tests. You can also run `bin/console` for an interactive prompt that will allow you to experiment. To install this gem onto your local machine, run `bundle exec rake install`. To release a new version, update the version number in `version.rb`, and then run `bundle exec rake release`, which will create a git tag for the version, push git commits and tags, and push the `.gem` file to [rubygems.org](https://rubygems.org). ## Contributing Bug reports and pull requests are welcome on GitHub at https://github.com/Altiscale/check_tcp_memory. This project is intended to be a safe, welcoming space for collaboration, and contributors are expected to adhere to the [Contributor Covenant](contributor-covenant.org) code of conduct.

# Optio Welcome to your new gem! In this directory, you'll find the files you need to be able to package up your Ruby library into a gem. Put your Ruby code in the file `lib/optio`. To experiment with that code, run `bin/console` for an interactive prompt. ## Installation Add this line to your application's Gemfile: ```ruby gem 'optio' ``` And then execute: $ bundle Or install it yourself as: $ gem install optio ## Usage Write usage instructions here ## Development After checking out the repo, run `bin/setup` to install dependencies. Then, run `rake test` to run the tests. You can also run `bin/console` for an interactive prompt that will allow you to experiment. To install this gem onto your local machine, run `bundle exec rake install`. To release a new version, update the version number in `version.rb`, and then run `bundle exec rake release`, which will create a git tag for the version, push git commits and tags, and push the `.gem` file to [rubygems.org](https://rubygems.org). ## Contributing Bug reports and pull requests are welcome on GitHub at https://github.com/[USERNAME]/optio. This project is intended to be a safe, welcoming space for collaboration, and contributors are expected to adhere to the [Contributor Covenant](http://contributor-covenant.org) code of conduct. ## License The gem is available as open source under the terms of the [MIT License](http://opensource.org/licenses/MIT). ## Code of Conduct Everyone interacting in the Optio project’s codebases, issue trackers, chat rooms and mailing lists is expected to follow the [code of conduct](https://github.com/[USERNAME]/optio/blob/master/CODE_OF_CONDUCT.md).

# Dotbot: A Cute Lil' Dotfiles Manager I made a simple little dotfiles manager because I got tired of creating symlinks all the time. ## Installation You can install `dotbot` via the `gem` command: $ gem install dotbot Once you have it installed, either create a `~/.dotbot` file (YAML) with the following contents. ``` dir: ~/.dotfiles # or whatever your preferred location is ``` Optionally, instead of a .dotbot file, you can use environment variables, each of the pattern DOTBOT_<var>. For instance, you could execute some commands by saying $ DOTBOT_DIR=~/shnargleflorp dotbot update More commands and options to come later. ## Usage ### Track a New File $ dotbot track <filename> [--git] This command adds the file to your dotfiles repo and creates a symlink in the file's old location so it will stay updated. Use the `--git` flag to also add/commit/push to your remote dotfiles repo. ### Update Your Dotfiles $ dotbot update This command is pretty much just a `git pull` in your dotfiles repo. ## Development After checking out the repo, run `bin/setup` to install dependencies. You can also run `bin/console` for an interactive prompt that will allow you to experiment. To install this gem onto your local machine, run `bundle exec rake install`. To release a new version, update the version number in `version.rb`, and then run `bundle exec rake release`, which will create a git tag for the version, push git commits and tags, and push the `.gem` file to [rubygems.org](https://rubygems.org). ## Contributing Bug reports and pull requests are welcome on GitHub at https://github.com/[USERNAME]/dotbot-mini. This project is intended to be a safe, welcoming space for collaboration, and contributors are expected to adhere to the [Contributor Covenant](http://contributor-covenant.org) code of conduct. ## License The gem is available as open source under the terms of the [MIT License](https://opensource.org/licenses/MIT). ## Code of Conduct Everyone interacting in the Dotbot::Mini project’s codebases, issue trackers, chat rooms and mailing lists is expected to follow the [code of conduct](https://github.com/rpalo/dotbot/blob/master/CODE_OF_CONDUCT.md).

# DECC 2050 CALCULATOR TOOL A C version and ruby wrapper for the www.decc.gov.uk 2050 energy and climate change excel calculator Further detail on the project: http://www.decc.gov.uk/2050 Canonical source: http://github.com/decc/decc_2050_model ## DEPENDENCIES 1. ruby 1.9.2 (including development headers) 2. basic c development headers This has ONLY been tested on OSX and on Ubuntu 64 bit EC2 ami. Grateful for reports from other platforms. In the util folder are two example scripts than can be helpful: 1. start-high-memory-instance.sh - is the script we use to setup an aws server to compile the model. You can't use it directly, because you won't have the right keys and certificates, but it can give clues. 2. setup-2050-model-builder-script.sh - is the script we use to get all the dependencies on that aws server correct, download this code, and then compile the model. Again, it may not be quite right for you but can server as inspiration ## INSTALLATION Note that this compiles the underlying c code, which might take 10-20 minutes or so gem install decc_2050_model ## UPDATING TO NEWER VERSIONS OF EXCEL MODEL First of all, you need to be working on the github version of the code, not the rubygem: git clone http://github.com/decc/decc_2050_model Then put the new spreadsheet in spreadsheet/2050Model.xlsx Then, from the top directory of the gem: bundle bundle exec rake The next step is to check whether lib/decc_2050_model/decc_2050_model_result.rb and lib/decc_2050_model/model_structure.rb need to be altered so that they pick up the correct places in the underlying excel. The final stage is to build and install the new gem: gem build decc_2050_model.gemspec gem install decc_2050_model-<version>.gem ... where <version> is the version number of the gem file that was created in the folder. Now follow the instructions in the twenty-fifty server directory in order to ensure that it is using this new version of the gem.

["This gem adds the integration for the nobrainer gem in Capistrano.\n\nIt creates the indexes automatically and run the database migration if any (WARNING: You need to use the zedtux's nobrainer fork in order to use migration scripts until it get merged).\n\n| Feature | capistrano-nobrainer version |\n| --------------------------- | ----------------------------- |\n| Nobrainer indexes creation | 0.2.0 |\n| Nobrainer migration scripts | 0.3.0 |\n\nSo if you don't use migration scripts, stick on version 0.2.0.\n\n## Installation\n\nAdd this line to your application's Gemfile:\n\n```ruby\ngem 'capistrano-nobrainer', '~> 0.2', require: false\n```\n\nAnd then execute:\n\n $ bundle install\n\nOr install it yourself as:\n\n $ gem install capistrano-nobrainer\n\n## Usage\n\nAdd the following require to your `Capfile`:\n\n```ruby\nrequire 'capistrano/nobrainer'\n```\n\n## Development\n\nAfter checking out the repo, run `bin/setup` to install dependencies. You can also run `bin/console` for an interactive prompt that will allow you to experiment.\n\nTo install this gem onto your local machine, run `bundle exec rake install`. To release a new version, update the version number in `version.rb`, and then run `bundle exec rake release`, which will create a git tag for the version, push git commits and tags, and push the `.gem` file to [rubygems.org](https://rubygems.org).\n\n## Contributing\n\nBug reports and pull requests are welcome on GitHub at https://gitlab.com/zedtux/capistrano-nobrainer. This project is intended to be a safe, welcoming space for collaboration, and contributors are expected to adhere to the [code of conduct](https://gitlab.com/zedtux/capistrano-nobrainer/blob/master/CODE_OF_CONDUCT.md).\n"]

# CheckChefConverge This is a Nagios/Sensu check that can check if nodes returned from a chef search have converged recently. ## Installation Add this line to your application's Gemfile: ```ruby gem 'check_chef_converge' ``` And then execute: $ bundle Or install it yourself as: $ gem install check_chef_converge ## Usage ``` Usage: check_chef_converge -w, --warn-minutes MINUTES Warning when chef has not converged in minutes.Default 65 -c, --crit-minutes MINUTES Critical when chef has not converged in minutes.Default 70 -q, --query SEARCH Chef query to filter on. Default 'fqdn:travis-work-mbp.local' --chef-client-config CONFIG Chef client configuration. --chef-server-url URL Chef Server URL. Must pass client-name and client-key or client-key-file with this option. --chef-client-name NAME Chef Client Name. Only used with server-url --chef-client-key KEY Chef Client Key (string). Only used with server-url. Takes precedence over client-key-file. --chef-client-key-file PATH Chef Client Key File. Only used with server-url -h, --help Show this message --version Show version ``` ## Development After checking out the repo, run `bin/setup` to install dependencies. Then, run `rake spec` to run the tests. You can also run `bin/console` for an interactive prompt that will allow you to experiment. To install this gem onto your local machine, run `bundle exec rake install`. To release a new version, update the version number in `version.rb`, and then run `bundle exec rake release`, which will create a git tag for the version, push git commits and tags, and push the `.gem` file to [rubygems.org](https://rubygems.org). ## Contributing Bug reports and pull requests are welcome on GitHub at https://github.com/Altiscale/check_chef_converge. This project is intended to be a safe, welcoming space for collaboration, and contributors are expected to adhere to the [Contributor Covenant](contributor-covenant.org) code of conduct.

# SshSig - SSH signature verification in pure ruby SshSig is a Ruby gem which can be used to verify signatures signed created by `ssh-keygen`. This capability was [first added](https://github.com/openssh/openssh-portable/commit/2a9c9f7272c1e8665155118fe6536bebdafb6166) in OpenSSH 8.0 allows SSH keys to be used for GPG-like signing capabilities, [including signing git commits](https://github.com/git/git/pull/1041). ## Installation Add this line to your application's Gemfile: ```ruby gem 'ssh_sig' ``` And then execute: $ bundle install Or install it yourself as: $ gem install ssh_sig ## Usage Version 1 of [the SSH signature format](https://github.com/openssh/openssh-portable/blob/b7ffbb17e37f59249c31f1ff59d6c5d80888f689/PROTOCOL.sshsig) supports `ed25519` and `rsa` keys. It is recommended that you use `ed25519` over `rsa` where possible (`ssh-keygen -t ed25519`). In order to verify a signature you need: 1. The public key of the sender 1. The signature file 1. The message to be verified. ```ruby require 'ssh_sig' armored_pubkey = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAILXPkJPI4TMFWZP4xRBQjNeizUG99KuZCt9G23rX48kz" blob = ::SshSig::Blob.from_armor( <<~EOF -----BEGIN SSH SIGNATURE----- U1NIU0lHAAAAAQAAADMAAAALc3NoLWVkMjU1MTkAAAAgtc+Qk8jhMwVZk/jFEFCM16LNQb 30q5kK30bbetfjyTMAAAAEZmlsZQAAAAAAAAAGc2hhNTEyAAAAUwAAAAtzc2gtZWQyNTUx OQAAAECJITeYJIlEeydsCTh1DkfdhlDJFBa73ojfWe0MbrIzoJKd9THd9WeQrhygSRGsNG cU/stk3/919nykg67yG2gN -----END SSH SIGNATURE----- EOF ) message = "This message was definitely sent by Brian Williams" valid = ::SshSig::Verifier .from_armored_pubkey(armored_pubkey) .verify(blob, message) if valid puts 'Signature is valid' else puts 'Signature is not valid' end ``` Signatures can be created using `ssh-keygen -Y sign -n file -f ~/.ssh/ed_25519 message.txt` and will be outputted in `message.txt.sig`. Public keys can be found in a variety of places, including: - Your `~/.ssh/id_<alg>.pub` file - `authorized_keys` files on servers - `https://gitlab.com/<username>.keys` - `https://github.com/<username>.keys` The `SshSig::Verifier#from_gitlab` and `SshSig::Verifier#from_github` methods are provided to automatically load public keys from the respective `<username>.keys` urls. ```ruby require 'ssh_sig' blob = ::SshSig::Blob.from_armor( <<~EOF -----BEGIN SSH SIGNATURE----- U1NIU0lHAAAAAQAAADMAAAALc3NoLWVkMjU1MTkAAAAgtc+Qk8jhMwVZk/jFEFCM16LNQb 30q5kK30bbetfjyTMAAAAEZmlsZQAAAAAAAAAGc2hhNTEyAAAAUwAAAAtzc2gtZWQyNTUx OQAAAECJITeYJIlEeydsCTh1DkfdhlDJFBa73ojfWe0MbrIzoJKd9THd9WeQrhygSRGsNG cU/stk3/919nykg67yG2gN -----END SSH SIGNATURE----- EOF ) message = 'This message was definitely sent by Brian Williams' valid = ::SshSig::Verifier .from_gitlab('bwill') .verify(blob, message) if valid puts 'Signature is valid' else puts 'Signature is not valid' end ``` ## Is it safe to re-purpose SSH keys for signing? Yes. The [SSH signature protocol](https://github.com/openssh/openssh-portable/blob/d575cf44895104e0fcb0629920fb645207218129/PROTOCOL.sshsig) is designed to be resistant to cross-protocol attacks, where signatures created for one purpose (i.e. signing a git commit), may be re-used for another purpose (i.e. authenticating to a server). It does this using the magic pre-amble (to differentiate between messages signed by `ssh-keygen` and messages used for SSH authentication) and namespaces (to differentiate between messages signed by `ssh-keygen` but used for different purposes). This causes identical messages to produce different signatures for each different protocol. ## Development After checking out the repo, run `bin/setup` to install dependencies. Then, run `rake spec` to run the tests. You can also run `bin/console` for an interactive prompt that will allow you to experiment. To install this gem onto your local machine, run `bundle exec rake install`. To release a new version, update the version number in `version.rb`, and then run `bundle exec rake release`, which will create a git tag for the version, push git commits and the created tag, and push the `.gem` file to [rubygems.org](https://rubygems.org). ## Contributing Bug reports and pull requests are welcome on GitHub at https://github.com/[USERNAME]/ssh_sig. This project is intended to be a safe, welcoming space for collaboration, and contributors are expected to adhere to the [code of conduct](https://github.com/[USERNAME]/ssh_sig/blob/main/CODE_OF_CONDUCT.md). ## License The gem is available as open source under the terms of the [MIT License](https://opensource.org/licenses/MIT).

# Soft Delete &gt; In a production app, you should probably never really delete anything. [source](https://twitter.com/theebeastmaster/status/966870021099180034) A soft-delete marks a record as deleted, and keeps it in the database for historical reference. ## Installation Add this line to your application's Gemfile: ```ruby gem "soft_delete-workbar", require: "soft_delete" ``` And then execute: $ bundle Or install it yourself as: $ gem install soft_delete-workbar ## Usage Safely "delete" records from your database without losing them permanently. * Add SoftDelete to a model ``` class MyModel &lt; ActiveRecord::Base include SoftDelete end ``` * Add a `deleted_at` column to the model's database table ``` rails g migration AddSoftDeleteToMyModels deleted_at:timestamp ``` * Safely call `MyModel#delete` without losing the record forever ## Methods Please see the `SoftDelete` module and the associated tests for a description of the methods that will be added to your model. * `.not_deleted` - records without a deleted_at timestamp * `.deleted` - records with a deleted_at timestamp * `#delete` - set the deleted_at timestamp * `#delete!` - delete the record from the database * `#destroy` - set the deleted_at timestamp, and run callbacks * `#destroy!` - delete the record from the database, and run callbacks * `#restore` - set the deleted_at timestamp to nil It will be necessary to exclude deleted records when querying the model. Use the `not_deleted` scope that now exists on the model. ```ruby class MyModelsController &lt; ApplicationController def index @my_models = MyModel.not_deleted end end ``` ## Development After checking out the repo, run `bin/setup` to install dependencies. Then, run `rake spec` to run the tests. You can also run `bin/console` for an interactive prompt that will allow you to experiment. To install this gem onto your local machine, run `bundle exec rake install`. To release a new version, update the version number in `version.rb`, and then run `bundle exec rake release`, which will create a git tag for the version, push git commits and tags, and push the `.gem` file to [rubygems.org](https://rubygems.org). ## Contributing Bug reports and pull requests are welcome on GitHub at https://github.com/workbar-dev/soft_delete. ## License The gem is available as open source under the terms of the [MIT License](https://opensource.org/licenses/MIT).

# Mint::Money Mint::Money perform currency conversion and arithmetics with different currencies. ## Installation Add this line to your application's Gemfile: ```ruby gem 'mint-money' ``` And then execute: $ bundle Or install it yourself as: $ gem install mint-money ## Usage ``` # Configure the currency rates with respect to a base currency (here EUR):   Money.conversion_rates('EUR', {   'USD'     =&gt; 1.11,   'Bitcoin' =&gt; 0.0047 }) ```   ``` # Instantiate money objects:   fifty_eur = Money.new(50, 'EUR')   # Get amount and currency:   fifty_eur.amount   # =&gt; 50 fifty_eur.currency # =&gt; "EUR" fifty_eur.inspect  # =&gt; "50.00 EUR" ```   ``` # Convert to a different currency (should return a Money # instance, not a String):   fifty_eur.convert_to('USD') # =&gt; 55.50 USD ```   ``` # Perform operations in different currencies:   twenty_dollars = Money.new(20, 'USD')   # Arithmetics:   fifty_eur + twenty_dollars # =&gt; 68.02 EUR fifty_eur - twenty_dollars # =&gt; 31.98 EUR fifty_eur / 2              # =&gt; 25 EUR twenty_dollars * 3         # =&gt; 60 USD ```   ``` # Comparisons (also in different currencies):   twenty_dollars == Money.new(20, 'USD') # =&gt; true twenty_dollars == Money.new(30, 'USD') # =&gt; false   fifty_eur_in_usd = fifty_eur.convert_to('USD') fifty_eur_in_usd == fifty_eur          # =&gt; true   twenty_dollars &gt; Money.new(5, 'USD')   # =&gt; true twenty_dollars &lt; fifty_eur             # =&gt; true ``` ## Development After checking out the repo, run `bin/setup` to install dependencies. Then, run `rake spec` to run the tests. You can also run `bin/console` for an interactive prompt that will allow you to experiment. To install this gem onto your local machine, run `bundle exec rake install`. To release a new version, update the version number in `version.rb`, and then run `bundle exec rake release`, which will create a git tag for the version, push git commits and tags, and push the `.gem` file to [rubygems.org](https://rubygems.org). ## Contributing Bug reports and pull requests are welcome on GitHub at https://github.com/mpakus/mint-money. [](https://circleci.com/gh/mpakus/mint-money)

# FaradayError [](https://badge.fury.io/rb/faraday_error) A [Faraday](https://github.com/lostisland/faraday) middleware for adding request parameters to your exception tracker. ### Supports - [Honeybadger](https://www.honeybadger.io/) - [NewRelic](http://newrelic.com/) - Your favorite thing, as soon as you make a pull request! ## Installation Add this line to your application's Gemfile: ```ruby gem 'faraday_error' ``` And then execute: $ bundle Or install it yourself as: $ gem install faraday_error ## Usage Configure your Faraday connection to use this middleware. You can optionally specify a name; defaults to `faraday`. It is expected that you also use `Faraday::Response::RaiseError` somewhere in your stack. ```ruby connection = Faraday.new(url: 'http://localhost:4567') do |faraday| faraday.use FaradayError::Middleware, name: "example_request" faraday.use Faraday::Response::RaiseError faraday.adapter Faraday.default_adapter end ``` And that's it. Make a request as you normally would. ```ruby connection.post do |req| req.url '/503' req.headers['Content-Type'] = 'application/json' req.body = JSON.generate(abc: "xyz") end ``` If any request fails, Honeybadger's "context" for this error will include your request parameters. If sending JSON or `application/x-www-form-urlencoded`, these will be included in parsed form. ```json { "example_request": { "method": "post", "url": "http://localhost:4567/503", "request_headers": { "User-Agent": "Faraday v0.9.2", "Content-Type": "application/json" }, "body_length": 13, "body": { "abc": "xyz" } } } ``` ## Development After checking out the repo, run `bin/setup` to install dependencies. Then, run `rake spec` to run the tests. You can also run `bin/console` for an interactive prompt that will allow you to experiment. To install this gem onto your local machine, run `bundle exec rake install`. To release a new version, update the version number in `version.rb`, and then run `bundle exec rake release`, which will create a git tag for the version, push git commits and tags, and push the `.gem` file to [rubygems.org](https://rubygems.org). The included [RestReflector](../master/spec/rest_reflector.rb) Sinatra app is suitable for making requests that are guaranteed to fail in particlar ways. ## Contributing Bug reports and pull requests are welcome on GitHub at https://github.com/jelder/faraday_error. This project is intended to be a safe, welcoming space for collaboration, and contributors are expected to adhere to the [Contributor Covenant](http://contributor-covenant.org) code of conduct. ## License The gem is available as open source under the terms of the [MIT License](http://opensource.org/licenses/MIT).

# Cryptophysh My attempt to produce a solution to the requirements listed [here](https://github.com/krystal/code-tasks/blob/main/password-generator.md). Essentially, a library/gem you can include in to your own code to add a `::generate_password` class method on a class. I've pushed the built gem up to RubyGems for completeness' sake. ## Installation Install the gem and add to the application's Gemfile by executing: $ bundle add cryptophysh If bundler is not being used to manage dependencies, install the gem by executing: $ gem install cryptophysh ## Usage ### Extending your own class `require cryptophysh` and Add to your class: `extend Cryptophysh` Your class will now have access to the `::generate_password` class method. ### Using the Cryptophysh::PasswordGenerator Class See the YARD documentation on the class itself for details. ## Development After checking out the repo, run `bin/setup` to install dependencies. Then, run `rake spec` to run the tests. You can also run `bin/console` for an interactive prompt that will allow you to experiment. To install this gem onto your local machine, run `bundle exec rake install`. To release a new version, update the version number in `version.rb`, and then run `bundle exec rake release`, which will create a git tag for the version, push git commits and the created tag, and push the `.gem` file to [rubygems.org](https://rubygems.org). ## Contributing Bug reports and pull requests are welcome on GitHub at https://github.com/[USERNAME]/cryptophysh. This project is intended to be a safe, welcoming space for collaboration, and contributors are expected to adhere to the [code of conduct](https://github.com/kryptykphysh/cryptophysh/blob/master/CODE_OF_CONDUCT.md). ## License The gem is available as open source under the terms of the [MIT License](https://opensource.org/licenses/MIT). ## Code of Conduct Everyone interacting in the Cryptophysh project's codebases, issue trackers, chat rooms and mailing lists is expected to follow the [code of conduct](https://github.com/kryptykphysh/cryptophysh/blob/master/CODE_OF_CONDUCT.md).

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.