Results for require-again

require the same thing the second time

Forked ahoward/bj because the way the bin/bj before_run method interacts with Main's logger= instance menthod breaks in Ruby 1.8.7. Forked again to add missing 'require logger'

Create dump file in temporary folder of root directory, if folder not present in dir then it will create one. Usage: open interactive prompt by typing 'irb' and require 'generate_dump_file'. again, require File.expand_path('../config/environment', __FILE__) and then run GenerateDumpFile.create

CircuitBreaker is a relatively simple Ruby mixin that will wrap a call to a given service in a circuit breaker pattern. The circuit starts off "closed" meaning that all calls will go through. However, consecutive failures are recorded and after a threshold is reached, the circuit will "trip", setting the circuit into an "open" state. In an "open" state, every call to the service will fail by raising CircuitBrokenException. The circuit will remain in an "open" state until the failure timeout has elapsed. After the failure_timeout has elapsed, the circuit will go into a "half open" state and the call will go through. A failure will immediately pop the circuit open again, and a success will close the circuit and reset the failure count. require 'circuit_breaker' class TestService include CircuitBreaker def call_remote_service() ... circuit_method :call_remote_service # Optional circuit_handler do |handler| handler.logger = Logger.new(STDOUT) handler.failure_threshold = 5 handler.failure_timeout = 5 end # Optional circuit_handler_class MyCustomCircuitHandler end

CircuitBreaker is a relatively simple Ruby mixin that will wrap a call to a given service in a circuit breaker pattern. The circuit starts off "closed" meaning that all calls will go through. However, consecutive failures are recorded and after a threshold is reached, the circuit will "trip", setting the circuit into an "open" state. In an "open" state, every call to the service will fail by raising CircuitBrokenException. The circuit will remain in an "open" state until the failure timeout has elapsed. After the failure_timeout has elapsed, the circuit will go into a "half open" state and the call will go through. A failure will immediately pop the circuit open again, and a success will close the circuit and reset the failure count. require 'circuit_breaker' class TestService include CircuitBreaker def call_remote_service() ... circuit_method :call_remote_service # Optional circuit_handler do |handler| handler.logger = Logger.new(STDOUT) handler.failure_threshold = 5 handler.failure_timeout = 5 end # Optional circuit_handler_class MyCustomCircuitHandler end

$Id: README.txt 204 2010-11-30 02:20:04Z pwilkins $ sm-transcript reads results of SLS processing and produces transcripts for the SpokenMedia browser. For each file in the source folder whose extension matches the source type, a file of destination type is created in the destination folder. All of these parameters have default values. Note: Examples of the commands you enter in the terminal are for *nix. The command prompt in the examples is: felix$ <command line> If you are a Windows user, make the usual adjustments. Requirements: sm-transcript is written in Ruby and packaged as a RubyGem. Since Ruby is not a compiled language, you will need to have Ruby installed on your machine to run sm-transcript. You can determine if Ruby is installed by typing "ruby -v" at a terminal prompt. It should return the version of Ruby that is installed. If Ruby is not installed on your machine, navigate to http://www.ruby-lang.org/ and follow the installation instructions. sm-transcript was developed using Ruby 1.8. Other Ruby versions have not been tested as of this release. Installation: You can get sm-transcript as either a RubyGem or as source from svn. The preferred way to install this package is as a Rubygem. You can download and install the gem with this command: felix$ sudo gem install [--verbose] sm-transcript This command downloads the most recent version of the gem from rubygems.org and makes it active. Previous versions of the gem remain installed, but are deactivated. You must use "sudo" to properly install the gem. If you execute "gem install" (omitting the "sudo") the gem is installed in your home gem repository and it isn't in your path without additional configuration. Note: You need sudo privileges to run the command as written. If you can't sudo, then you can install it locally and will need some additional configuration. Contact me (or your local Ruby wizard) for assistance. The executable is now in your path. You can cleanly uninstall the gem with this command: felix$ sudo gem uninstall sm-transcript If you have access to our svn repository, you are welcome to check out the code. Be warned that the trunk tip is not necessarily stable. It changes frequently as enhancements (and bug fixes) are added. (note that the 'smb_transcript' in the command line below is not a typo.) svn co svn+ssh://svn.mit.edu/oeit-tsa/SMB/smb_transcript/trunk sm_transcript build the gem by running this command from the directory you installed the source. This is what it looks like on my machine: felix$ rake gem The gem will be built and put in ./pkg You can now use the gem installation instructions above. Using the App: Run with no command line parameters, the app reads *.wrd files out of ./results and writes *.t1.html files to ./transcripts. These directories are relative to where sm_transcript is called. Note: destination files are overwritten without a warning prompt. If you want to preserve an existing output file, rename it before running the app again. For example, run the app by navigating to the bin folder and enter projects/sm_transcript/bin felix$ sm_transcript This command run from this folder will read *.wrd files from bin/results and write *-t1.html to bin/transcripts. Usage: sm_transcript [options] --srcdir PATH Read files from this folder (Default: ./results) --destdir PATH Write files to this folder (Default: ./transcripts) --srctype wrd | seg | txt | ttml | srt Kind of file to process (Default: wrd) --desttype html | ttml | datajs | json Kind of file to output (Default: html) -h, --help Show this message There is a serious gotch'a in specifying the srctype parameter: it must match the case of the file extension that you're processing. This means that if the srt files that you are processing have the extension .SRT, then you must specify the srctype as "SRT". Pretty lame, I know. I will update the gem with a fix shortly. My apologies until then. Troubleshooting: sm-transcript requires additional gems to operate. The RubyGem installation should install dependencies automatically, but when it doesn't, you get an error that includes ... no such file to load -- builder (LoadError) in the first few lines when you run sm-transcript, the problem is a missing dependent gem. (the error above indicates that the Builder gem is missing.) Try installing the missing gem. For the error above, the command looks like this on my computer: felix$ sudo gem install builder See "Required Gems" below for more information. A warning message such as: "WARNING: Nokogiri was built against LibXML version 2.7.6, but has dynamically loaded 2.7.7"" may be safely ignored. If you continue to have trouble, feel free to contact me. Upgrading: You can easily upgrade by simply executing the same command you used to install the gem. Running install again will add the newer version and make it active. By default the most recent version is used, but older versions are still available, simply inactive. If are using svn, you should already know what to do. Required Gems: builder - create structured data, such as XML extensions - added for the 'require_relative' command. (To get this command in Ruby 1.8 you need to install this gem, for Ruby 1.9 the command is already part of the core.) htmlentities - html parsing json - create JSON structured data nokogiri - xml parsing library optparse - option parsing of command line ostruct - open data structures ppcommand - pp is a pretty printer. It is used only for debugging rake - make for Ruby rubygems - support for gems (shouldn't be needed for Ruby 1.9) shoulda - enhancement for Test::Unit This command installs gems on OSX and Linux: felix$ sudo gem install <gem name> I recommend running the following command to update to latest version of rubygems before loading new gems. felix$ sudo gem update --system Unit Tests: You may run all unit tests by navigating to the test folder and running rake with no parameters (the default rake task runs all tests). On my computer, it looks like this: projects/sm_transcript/test felix$ rake Release Notes: Initial Version - runs under Ruby 1.8.x. version 0.0.4 - fixes bug when processing .WRD files with CRLF line endings. version 0.0.5 - removed due to posting error version 0.0.6 - added srctype of ttml and desttype of json, fixed bug where beginning time of word was actually for previous word. version 0.0.7 - added srt as srctype version 0.0.8 - fixed bug that dropped last phrase from transcripts version 1.0.0 - declared this version 1.0.0 to conform more closely with gem numbering conventions. All tests run successfully. To Do: - specify individual files for processing rather than folders - fix bug in srt processing: can't read Creole srt content. - allow user to modify the "t1" file extension for addition languages of the same transcript. - update code to run under Ruby 1.9

Send SMS messages using the CellForce API

= TMail http://tmail.rubyforge.org/ Mikel Lindsaar maintainer Trans assitant developer Minero Aoki original developer == NOTE: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ! THIS IS A FORK OF TMAIL HACKED TOGETHER TO WORK WITH RUBY 1.9.1 ! ! USE AT YOUR OWN DISCRETION ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! == DESCRIPTION: TMail is a mail handling library for Ruby. It abstracts a mail message into a usable object allowing you to read, set, add and delete headers and the mail body. TMail is used by the Ruby on Rails web framework as the Email abstraction layer for their ActionMailer module. It is also used by the Nitro framework and many other applications on and off the web. The goal of the TMail handling library is to be able to parse and handle raw Email sources and produce RFC compliant Emails as a result. If you find something that TMail does that violates an RFC, we want to know and we'll get it fixed fast. == DOCUMENTATION: The place you will want to look first is the TMail::Mail class. This has the vast majority of methods you will be using to talk to your TMail object. == FEATURES/PROBLEMS: TMail is fairly RFC compliant on the handling of emails. There are also some problems in the header handling, but for 99.9% of email, you will be fine. Usually, the problems revolve around parsing incomming emails and making sense of them. I really welcome any examples of Emails that "didn't work" with TMail so I can use them as test cases. == SYNOPSIS: TMail is very easy to use. You simply require the library and then pass a raw email text message into the TMail::Mail.parse method. This returns a TMail::Mail object which you can now query and run methods against to modify, inspect or add to the Email. You can find almost all of the methods that you will use to talk to and update a TMail instance in the TMail::Mail class. I am constantly updating this code, with comments, added a fair bit and have a lot more to go!. === Short Version: irb(main):001:0&gt; require 'tmail' irb(main):002:0&gt; raw_email = File.open("my_raw_email", 'r') { |f| @mail = f.read } irb(main):003:0&gt; email = TMail::Mail.parse(raw_email) irb(main):004:0&gt; puts email['to'] mikel@example.com =&gt; nil irb(main):005:0&gt; email['to'] = 'mikel@somewhere.else.com' =&gt; "mikel@somewhere.else.com" irb(main):006:0&gt; puts email['to'] mikel@somewhere.else.com =&gt; nil === Longer Version: Assuming you have a single raw email in the variable my_message, you can do the following: require 'tmail' email = TMail::Mail.parse(my_message) This will give you a TMail::Mail class containing your parsed message. There are other methods of opening emails through Ports. You can view this email by a simple puts: puts email Return-Path: &lt;mikel@nowhere.com&gt; Date: Sun, 21 Oct 2007 19:38:13 +1000 From: Mikel Lindsaar &lt;mikel@nowhere.com&gt; To: mikel@somewhere.com Message-Id: &lt;009601c813c6$19df3510$0437d30a@mikel091a&gt; Subject: Testing Email Hello Mikel Easy right? === Adding a header to the EMail: Say now that you have opened your message, you want to put in a Reply-To field. You do this like so: email['reply-to'] = "My Email Address &lt;my_address@anotherplace.com&gt;" Is it really there? Well, find out with a puts: puts email Return-Path: &lt;mikel@nowhere.com&gt; Date: Sun, 21 Oct 2007 19:38:13 +1000 From: Mikel Lindsaar &lt;mikel@nowhere.com&gt; Reply-To: My Email Address &lt;my_address@anotherplace.com&gt; To: mikel@somewhere.com Message-Id: &lt;009601c813c6$19df3510$0437d30a@mikel091a&gt; Subject: Testing Email Hello Mikel Yup looks good. === Inspecting a header: You can then inspect your added header by doing: email['reply-to'] # =&gt; #&lt;TMail::AddressHeader "My Email Address &lt;my_address@anotherplace.com&gt;"&gt; If you just want to the actual value, not the AddressHeader object, pass to_s to this. email['reply-to'].to_s # =&gt; "My Email Address &lt;my_address@anotherplace.com&gt;" === Deleting a header: One way of deleting a header from an Email is just assigning it nil like so: email['reply-to'] = nil # =&gt; nil If you now puts the email again, it will not be included: puts email Return-Path: &lt;mikel@nowhere.com&gt; Date: Sun, 21 Oct 2007 19:38:13 +1000 From: Mikel Lindsaar &lt;mikel@nowhere.com&gt; To: mikel@somewhere.com Message-Id: &lt;009601c813c6$19df3510$0437d30a@mikel091a&gt; Subject: Testing Email Hello Mikel === Writing out an Email: You can just call to_s on any email to have it serialized out as a single string with the right number of line breaks and encodings. == CONTRIBUTING: You can visit the {Contributing to TMail}[link:http://tmail.rubyforge.org/contributing/] to find out how to contribute to TMail, developers are welcome and wanted! == REQUIREMENTS: * C compiler if you want the Ruby extension for Scanner * Ruby 1.8 or later == INSTALLATION: * sudo gem install tmail Or manually, * sudo script/setup == LICENSE: (The MIT License) Copyright (c) 2007 FIX Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the 'Software'), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED 'AS IS', WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Contentful API wrapper library exposing an ActiveRecord-like interface

Ame Ame provides a simple command-line interface API for Ruby¹. It can be used to provide both simple interfaces like that of ‹rm›² and complex ones like that of ‹git›³. It uses Ruby’s own classes, methods, and argument lists to provide an interface that is both simple to use from the command-line side and from the Ruby side. The provided command-line interface is flexible and follows commond standards for command-line processing. ¹ See http://ruby-lang.org/ ² See http://pubs.opengroup.org/onlinepubs/9699919799/utilities/rm.html ³ See http://git-scm.com/docs/ § Usage Let’s begin by looking at two examples, one where we mimic the POSIX¹ command-line interface to the ‹rm› command. Looking at the entry² in the standard, ‹rm› takes the following options: = -f. = Do not prompt for confirmation. = -i. = Prompt for confirmation. = -R. = Remove file hierarchies. = -r. = Equivalent to /-r/. It also takes the following arguments: = FILE. = A pathname or directory entry to be removed. And actually allows one or more of these /FILE/ arguments to be given. We also note that the ‹rm› command is described as a command to “remove directory entries”. ¹ See http://pubs.opengroup.org/onlinepubs/9699919799/utilities/contents.html ² See http://pubs.opengroup.org/onlinepubs/9699919799/utilities/rm.html Let’s turn this specification into one using Ame’s API. We begin by adding a flag for each of the options listed above: class Rm &lt; Ame::Root flag 'f', '', false, 'Do not prompt for confirmation' flag 'i', '', nil, 'Prompt for confirmation' do |options| options['f'] = false end flag 'R', '', false, 'Remove file hierarchies' flag 'r', '', nil, 'Equivalent to -R' do |options| options['r'] = true end A flag¹ is a boolean option that doesn’t take an argument. Each flag gets a short and long name, where an empty name means that there’s no corresponding short or long name for the flag, a default value (true, false, or nil), and a description of what the flag does. Each flag can also optionally take a block that can do further processing. In this case we use this block to modify the Hash that maps option names to their values passed to the block to set other flags’ values than the ones that the block is associated with. As these flags (‘i’ and ‘r’) aren’t themselves of interest, their default values have been set to nil, which means that they won’t be included in the Hash that maps option names to their values when passed to the method. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#flag-class-method There are quite a few other kinds of options besides flags that can be defined using Ame, but flags are all that are required for this example. We’ll get to the other kinds in later examples. Next we add a “splus” argument. splus 'FILE', String, 'File to remove' A splus¹ argument is like a Ruby “splat”, that is, an Array argument at the end of the argument list to a method preceded by a star, except that a splus requires at least one argument. A splus argument gets a name for the argument (‹FILE›), the type of argument it represents (String), and a description. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#splus-class-method Then we add a description of the command (method) itself: description 'Remove directory entries' Descriptions¹ will be used in help output to assist the user in using the command. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#description-class-method Finally, we add the Ruby method that’ll implement the command (all preceding code included here for completeness): class Rm &lt; Ame::Root version '1.0.0' flag 'f', '', false, 'Do not prompt for confirmation' flag 'i', '', nil, 'Prompt for confirmation' do |options| options['f'] = false end flag 'R', '', false, 'Remove file hierarchies' flag 'r', '', nil, 'Equivalent to -R' do |options| options['r'] = true end splus 'FILE', String, 'File to remove' description 'Remove directory entries' def rm(files, options = {}) require 'fileutils' FileUtils.send options['R'] ? :rm_r : :rm, [first] + rest, :force =&gt; options['f'] end end Actually, another bit of code was also added, namely version '1.0.0' This sets the version¹ String of the command. This information is used when the command is invoked with the “‹--version›” flag. This flag is automatically added, so you don’t need to add it yourself. Another flag, “‹--help›”, is also added automatically. When given, this flag’ll make Ame output usage information of the command. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#version-class-method To actually run the command, all you need to do is invoke Rm.process This’ll invoke the command using the command-line arguments stored in ‹ARGV›, but you can also specify other ones if you want to: Rm.process 'rm', %w[-r /tmp/*] The first argument to #process¹ is the name of the method to invoke, which defaults to ‹File.basename($0)›, and the second argument is an Array of Strings that should be processed as command-line arguments passed to the command. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#process-class-method If you’d store the complete ‹Rm› class defined above in a file called ‹rm› and add ‹#! /usr/bin/ruby -w› at the beginning and ‹Rm.process› at the end, you’d have a fully functional ‹rm› command (after making it executable). Let’s see it in action: % rm --help Usage: rm [OPTIONS]... FILE... Remove directory entries Arguments: FILE... File to remove Options: -R Remove file hierarchies -f Do not prompt for confirmation --help Display help for this method -i Prompt for confirmation -r Equivalent to -R --version Display version information % rm --version rm 1.0.0 Some commands are more complex than ‹rm›. For example, ‹git›¹ has a rather complex command-line interface. We won’t mimic it all here, but let’s introduce the rest of the Ame API using a fake ‹git› clone as an example. ¹ See http://git-scm.com/docs/ ‹Git› uses sub-commands to achieve most things. Implementing sub-commands with Ame is done using a “dispatch”. We’ll discuss dispatches in more detail later, but suffice it to say that a dispatch delegates processing to a child class that’ll handle the sub-command in question. We begin by defining our main ‹git› command using a class called ‹Git› under the ‹Git::CLI› namespace: module Git end class Git::CLI &lt; Ame::Root version '1.0.0' class Git &lt; Ame::Class description 'The stupid content tracker' def initialize; end We’re setting things up to use the ‹Git› class as a dispatch in the ‹Git::CLI› class. The description on the ‹initialize› method will be used as a description of the ‹git› dispatch command itself. Next, let’s add the ‹format-patch›¹ sub-command: description 'Prepare patches for e-mail submission' flag ?n, 'numbered', false, 'Name output in [PATCH n/m] format' flag ?N, 'no-numbered', nil, 'Name output in [PATCH] format' do |options| options['numbered'] = false end toggle ?s, 'signoff', false, 'Add Signed-off-by: line to the commit message' switch '', 'thread', 'STYLE', nil, Ame::Types::Enumeration[:shallow, :deep], 'Controls addition of In-Reply-To and References headers' flag '', 'no-thread', nil, 'Disables addition of In-Reply-To and Reference headers' do |options, _| options.delete 'thread' end option '', 'start-number', 'N', 1, 'Start numbering the patches at N instead of 1' multioption '', 'to', 'ADDRESS', String, 'Add a To: header to the email headers' optional 'SINCE', 'N/A', 'Generate patches for commits after SINCE' def format_patch(since = '', options = {}) p since, options end ¹ See http://git-scm.com/docs/git-format-patch/ We’re using quite a few new Ame commands here. Let’s look at each in turn: toggle ?s, 'signoff', false, 'Add Signed-off-by: line to the commit message' A “toggle”¹ is a flag that also has an inverse. Beyond the flags ‘s’ and “signoff”, the toggle also defines “no-signoff”, which will set “signoff” to false. This is useful if you want to support configuration files that set “signoff”’s default to true, but still allow it to be overridden on the command line. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#toggle-class-method When using the short form of a toggle (and flag and switch), multiple ones may be juxtaposed after the initial one. For example, “‹-sn›” is equivalent to “‹-s -n›” to “git format-patch›”. switch '', 'thread', 'STYLE', nil, Ame::Types::Enumeration[:shallow, :deep], 'Controls addition of In-Reply-To and References headers' A “switch”¹ is an option that takes an optional argument. This allows you to have separate defaults for when the switch isn’t present on the command line and for when it’s given without an argument. The third argument to a switch is the name of the argument. We’re also introducing a new concept here in ‹Ame::Types::Enumeration›. An enumeration² allows you to limit the allowed input to a set of Symbols. An enumeration also has a default value in the first item to its constructor (which is aliased as ‹.[]›). In this case, the “thread” switch defaults to nil, but, when given, will default to ‹:shallow› if no argument is given. If an argument is given it must be either “shallow” or “deep”. A switch isn’t required to take an enumeration as its argument default and can take any kind of default value for its argument that Ame knows how to handle. We’ll look at this in more detail later, but know that the type of the default value will be used to inform Ame how to parse a command-line argument into a Ruby value. An argument to a switch must be given, in this case, as “‹--thread=deep›” on the command line. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#switch-class-method ² See http://disu.se/software/ame-1.0/api/user/Ame/Types/Enumeration/ option '', 'start-number', 'N', 1, 'Start numbering the patches at N instead of 1' An “option”¹ is an option that takes an argument. The argument must always be present and may be given, in this case, as “‹--start-number=2›” or “‹--start-number 2›” on the command line. For a short-form option, anything that follows the option is seen as an argument, so assuming that “start-number” also had a short name of ‘S’, “‹-S2›” would be equivalent to “‹-S 2›”, which would be equivalent to “‹--start-number 2›”. Note that “‹-snS2›” would still work as expected. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#option-class-method multioption '', 'to', 'ADDRESS', String, 'Add a To: header to the email headers' A “multioption”¹ is an option that takes an argument and may be repeated any number of times. Each argument will be added to an Array stored in the Hash that maps option names to their values. Instead of taking a default argument, it takes a type for the argument (String, in this case). Again, types are used to inform Ame how to parse command-line arguments into Ruby values. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#multioption-class-method optional 'SINCE', 'N/A', 'Generate patches for commits after SINCE' An “optional”¹ argument is an argument that isn’t required. If it’s not present on the command line it’ll get its default value (the String ‹'N/A'›, in this case). ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#optional-class-method We’ve now covered all kinds of options and one new kind of argument. There are three more types of argument (one that we’ve already seen and two new) that we’ll look into now: “argument”, “splat”, and “splus”. description 'Annotate file lines with commit information' argument 'FILE', String, 'File to annotate' def annotate(file) p file end An “argument”¹ is an argument that’s required. If it’s not present on the command line, an error will be raised (and by default reported to the terminal). As it’s required, it doesn’t take a default, but rather a type. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#argument-class-method description 'Add file contents to the index' splat 'PATHSPEC', String, 'Files to add content from' def add(paths) p paths end A “splat”¹ is an argument that’s not required, but may be given any number of times. The type of a splat is the type of one argument and the type of a splat as a whole is an Array of values of that type. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#splat-class-method description 'Display gitattributes information' splus 'PATHNAME', String, 'Files to list attributes of' def check_attr(paths) p paths end A “splus”¹ is an argument that’s required, but may also be given any number of times. The type of a splus is the type of one argument and the type of a splus as a whole is an Array of values of that type. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#splus-class-method Now that we’ve seen all kinds of options and arguments, let’s look on an additional tool at our disposal, the dispatch¹. class Remote &lt; Ame::Class description 'Manage set of remote repositories' def initialize; end description 'Shows a list of existing remotes' flag 'v', 'verbose', false, 'Show remote URL after name' def list(options = {}) p options end description 'Adds a remote named NAME for the repository at URL' argument 'name', String, 'Name of the remote to add' argument 'url', String, 'URL to the repository of the remote to add' def add(name, url) p name, url end end ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#dispatch-class-method Here we’re defining a child class to Git::CLI::Git called “Remote” that doesn’t introduce anything new. Then we set up the dispatch: dispatch Remote, :default =&gt; 'list' This adds a method called “remote” to Git::CLI::Git that will dispatch processing of the command line to an instance of the Remote class when “‹git remote›” is seen on the command line. The “remote” method expects an argument that’ll be used to decide what sub-command to execute. Here we’ve specified that in the absence of such an argument, the “list” method should be invoked. We add the same kind of dispatch to Git under Git::CLI: dispatch Git and then we’re done. Here’s all the previous code in its entirety: module Git end class Git::CLI &lt; Ame::Root version '1.0.0' class Git &lt; Ame::Class description 'The stupid content tracker' def initialize; end description 'Prepare patches for e-mail submission' flag ?n, 'numbered', false, 'Name output in [PATCH n/m] format' flag ?N, 'no-numbered', nil, 'Name output in [PATCH] format' do |options| options['numbered'] = false end toggle ?s, 'signoff', false, 'Add Signed-off-by: line to the commit message' switch '', 'thread', 'STYLE', nil, Ame::Types::Enumeration[:shallow, :deep], 'Controls addition of In-Reply-To and References headers' flag '', 'no-thread', nil, 'Disables addition of In-Reply-To and Reference headers' do |options, _| options.delete 'thread' end option '', 'start-number', 'N', 1, 'Start numbering the patches at N instead of 1' multioption '', 'to', 'ADDRESS', String, 'Add a To: header to the email headers' optional 'SINCE', 'N/A', 'Generate patches for commits after SINCE' def format_patch(since = '', options = {}) p since, options end description 'Annotate file lines with commit information' argument 'FILE', String, 'File to annotate' def annotate(file) p file end description 'Add file contents to the index' splat 'PATHSPEC', String, 'Files to add content from' def add(paths) p paths end description 'Display gitattributes information' splus 'PATHNAME', String, 'Files to list attributes of' def check_attr(paths) p paths end class Remote &lt; Ame::Class description 'Manage set of remote repositories' def initialize; end description 'Shows a list of existing remotes' flag 'v', 'verbose', false, 'Show remote URL after name' def list(options = {}) p options end description 'Adds a remote named NAME for the repository at URL' argument 'name', String, 'Name of the remote to add' argument 'url', String, 'URL to the repository of the remote to add' def add(name, url) p name, url end end dispatch Remote, :default =&gt; 'list' end dispatch Git end If we put this code in a file called “git” and add ‹#! /usr/bin/ruby -w› at the beginning and ‹Git::CLI.process› at the end, you’ll have a very incomplete git command-line interface on your hands. Let’s look at what some of its ‹--help› output looks like: % git --help Usage: git [OPTIONS]... METHOD [ARGUMENTS]... The stupid content tracker Arguments: METHOD Method to run [ARGUMENTS]... Arguments to pass to METHOD Options: --help Display help for this method --version Display version information Methods: add Add file contents to the index annotate Annotate file lines with commit information check-attr Display gitattributes information format-patch Prepare patches for e-mail submission remote Manage set of remote repositories % git format-patch --help Usage: git format-patch [OPTIONS]... [SINCE] Prepare patches for e-mail submission Arguments: [SINCE=N/A] Generate patches for commits after SINCE Options: -N, --no-numbered Name output in [PATCH] format --help Display help for this method -n, --numbered Name output in [PATCH n/m] format --no-thread Disables addition of In-Reply-To and Reference headers -s, --signoff Add Signed-off-by: line to the commit message --start-number=N Start numbering the patches at N instead of 1 --thread[=STYLE] Controls addition of In-Reply-To and References headers --to=ADDRESS* Add a To: header to the email headers % git remote --help Usage: git remote [OPTIONS]... [METHOD] [ARGUMENTS]... Manage set of remote repositories Arguments: [METHOD=list] Method to run [ARGUMENTS]... Arguments to pass to METHOD Options: --help Display help for this method Methods: add Adds a remote named NAME for the repository at URL list Shows a list of existing remotes § API The previous section gave an introduction to the whole user API in an informal and introductory way. For an indepth reference to the user API, see the {user API documentation}¹. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/ If you want to extend the API or use it in some way other than as a command-line-interface writer, see the {developer API documentation}¹. ¹ See http://disu.se/software/ame-1.0/api/developer/Ame/ § Financing Currently, most of my time is spent at my day job and in my rather busy private life. Please motivate me to spend time on this piece of software by donating some of your money to this project. Yeah, I realize that requesting money to develop software is a bit, well, capitalistic of me. But please realize that I live in a capitalistic society and I need money to have other people give me the things that I need to continue living under the rules of said society. So, if you feel that this piece of software has helped you out enough to warrant a reward, please PayPal a donation to now@disu.se¹. Thanks! Your support won’t go unnoticed! ¹ Send a donation: https://www.paypal.com/cgi-bin/webscr?cmd=_donations&amp;business=now@disu.se&amp;item_name=Ame § Reporting Bugs Please report any bugs that you encounter to the {issue tracker}¹. ¹ See https://github.com/now/ame/issues § Authors Nikolai Weibull wrote the code, the tests, the documentation, and this README. § Licensing Ame is free software: you may redistribute it and/or modify it under the terms of the {GNU Lesser General Public License, version 3}¹ or later², as published by the {Free Software Foundation}³. ¹ See http://disu.se/licenses/lgpl-3.0/ ² See http://gnu.org/licenses/ ³ See http://fsf.org/

This documentation describes LaunchDarkly's REST API. To access the complete OpenAPI spec directly, use [Get OpenAPI spec](https://launchdarkly.com/docs/api/other/get-openapi-spec). To learn how to use LaunchDarkly using the user interface (UI) instead, read our [product documentation](https://launchdarkly.com/docs/home). ## Authentication LaunchDarkly's REST API uses the HTTPS protocol with a minimum TLS version of 1.2. All REST API resources are authenticated with either [personal or service access tokens](https://launchdarkly.com/docs/home/account/api), or session cookies. Other authentication mechanisms are not supported. You can manage personal access tokens on your [**Authorization**](https://app.launchdarkly.com/settings/authorization) page in the LaunchDarkly UI. LaunchDarkly also has SDK keys, mobile keys, and client-side IDs that are used by our server-side SDKs, mobile SDKs, and JavaScript-based SDKs, respectively. **These keys cannot be used to access our REST API**. These keys are environment-specific, and can only perform read-only operations such as fetching feature flag settings. | Auth mechanism | Allowed resources | Use cases | | ----------------------------------------------------------------------------------------------- | ----------------------------------------------------------------------------------------------------- | -------------------------------------------------- | | [Personal or service access tokens](https://launchdarkly.com/docs/home/account/api) | Can be customized on a per-token basis | Building scripts, custom integrations, data export. | | SDK keys | Can only access read-only resources specific to server-side SDKs. Restricted to a single environment. | Server-side SDKs | | Mobile keys | Can only access read-only resources specific to mobile SDKs, and only for flags marked available to mobile keys. Restricted to a single environment. | Mobile SDKs | | Client-side ID | Can only access read-only resources specific to JavaScript-based client-side SDKs, and only for flags marked available to client-side. Restricted to a single environment. | Client-side JavaScript | > #### Keep your access tokens and SDK keys private > > Access tokens should _never_ be exposed in untrusted contexts. Never put an access token in client-side JavaScript, or embed it in a mobile application. LaunchDarkly has special mobile keys that you can embed in mobile apps. If you accidentally expose an access token or SDK key, you can reset it from your [**Authorization**](https://app.launchdarkly.com/settings/authorization) page. > > The client-side ID is safe to embed in untrusted contexts. It's designed for use in client-side JavaScript. ### Authentication using request header The preferred way to authenticate with the API is by adding an `Authorization` header containing your access token to your requests. The value of the `Authorization` header must be your access token. Manage personal access tokens from the [**Authorization**](https://app.launchdarkly.com/settings/authorization) page. ### Authentication using session cookie For testing purposes, you can make API calls directly from your web browser. If you are logged in to the LaunchDarkly application, the API will use your existing session to authenticate calls. Depending on the permissions granted as part of your [role](https://launchdarkly.com/docs/home/account/roles), you may not have permission to perform some API calls. You will receive a `401` response code in that case. > ### Modifying the Origin header causes an error > > LaunchDarkly validates that the Origin header for any API request authenticated by a session cookie matches the expected Origin header. The expected Origin header is `https://app.launchdarkly.com`. > > If the Origin header does not match what's expected, LaunchDarkly returns an error. This error can prevent the LaunchDarkly app from working correctly. > > Any browser extension that intentionally changes the Origin header can cause this problem. For example, the `Allow-Control-Allow-Origin: *` Chrome extension changes the Origin header to `http://evil.com` and causes the app to fail. > > To prevent this error, do not modify your Origin header. > > LaunchDarkly does not require origin matching when authenticating with an access token, so this issue does not affect normal API usage. ## Representations All resources expect and return JSON response bodies. Error responses also send a JSON body. To learn more about the error format of the API, read [Errors](https://launchdarkly.com/docs/api#errors). In practice this means that you always get a response with a `Content-Type` header set to `application/json`. In addition, request bodies for `PATCH`, `POST`, and `PUT` requests must be encoded as JSON with a `Content-Type` header set to `application/json`. ### Summary and detailed representations When you fetch a list of resources, the response includes only the most important attributes of each resource. This is a _summary representation_ of the resource. When you fetch an individual resource, such as a single feature flag, you receive a _detailed representation_ of the resource. The best way to find a detailed representation is to follow links. Every summary representation includes a link to its detailed representation. ### Expanding responses Sometimes the detailed representation of a resource does not include all of the attributes of the resource by default. If this is the case, the request method will clearly document this and describe which attributes you can include in an expanded response. To include the additional attributes, append the `expand` request parameter to your request and add a comma-separated list of the attributes to include. For example, when you append `?expand=members,maintainers` to the [Get team](https://launchdarkly.com/docs/api/teams/get-team) endpoint, the expanded response includes both of these attributes. ### Links and addressability The best way to navigate the API is by following links. These are attributes in representations that link to other resources. The API always uses the same format for links: - Links to other resources within the API are encapsulated in a `_links` object - If the resource has a corresponding link to HTML content on the site, it is stored in a special `_site` link Each link has two attributes: - An `href`, which contains the URL - A `type`, which describes the content type For example, a feature resource might return the following: ```json { "_links": { "parent": { "href": "/api/features", "type": "application/json" }, "self": { "href": "/api/features/sort.order", "type": "application/json" } }, "_site": { "href": "/features/sort.order", "type": "text/html" } } ``` From this, you can navigate to the parent collection of features by following the `parent` link, or navigate to the site page for the feature by following the `_site` link. Collections are always represented as a JSON object with an `items` attribute containing an array of representations. Like all other representations, collections have `_links` defined at the top level. Paginated collections include `first`, `last`, `next`, and `prev` links containing a URL with the respective set of elements in the collection. ## Updates Resources that accept partial updates use the `PATCH` verb. Most resources support the [JSON patch](https://launchdarkly.com/docs/api#updates-using-json-patch) format. Some resources also support the [JSON merge patch](https://launchdarkly.com/docs/api#updates-using-json-merge-patch) format, and some resources support the [semantic patch](https://launchdarkly.com/docs/api#updates-using-semantic-patch) format, which is a way to specify the modifications to perform as a set of executable instructions. Each resource supports optional [comments](https://launchdarkly.com/docs/api#updates-with-comments) that you can submit with updates. Comments appear in outgoing webhooks, the audit log, and other integrations. When a resource supports both JSON patch and semantic patch, we document both in the request method. However, the specific request body fields and descriptions included in our documentation only match one type of patch or the other. ### Updates using JSON patch [JSON patch](https://datatracker.ietf.org/doc/html/rfc6902) is a way to specify the modifications to perform on a resource. JSON patch uses paths and a limited set of operations to describe how to transform the current state of the resource into a new state. JSON patch documents are always arrays, where each element contains an operation, a path to the field to update, and the new value. For example, in this feature flag representation: ```json { "name": "New recommendations engine", "key": "engine.enable", "description": "This is the description", ... } ``` You can change the feature flag's description with the following patch document: ```json [{ "op": "replace", "path": "/description", "value": "This is the new description" }] ``` You can specify multiple modifications to perform in a single request. You can also test that certain preconditions are met before applying the patch: ```json [ { "op": "test", "path": "/version", "value": 10 }, { "op": "replace", "path": "/description", "value": "The new description" } ] ``` The above patch request tests whether the feature flag's `version` is `10`, and if so, changes the feature flag's description. Attributes that are not editable, such as a resource's `_links`, have names that start with an underscore. ### Updates using JSON merge patch [JSON merge patch](https://datatracker.ietf.org/doc/html/rfc7386) is another format for specifying the modifications to perform on a resource. JSON merge patch is less expressive than JSON patch. However, in many cases it is simpler to construct a merge patch document. For example, you can change a feature flag's description with the following merge patch document: ```json { "description": "New flag description" } ``` ### Updates using semantic patch Some resources support the semantic patch format. A semantic patch is a way to specify the modifications to perform on a resource as a set of executable instructions. Semantic patch allows you to be explicit about intent using precise, custom instructions. In many cases, you can define semantic patch instructions independently of the current state of the resource. This can be useful when defining a change that may be applied at a future date. To make a semantic patch request, you must append `domain-model=launchdarkly.semanticpatch` to your `Content-Type` header. Here's how: ``` Content-Type: application/json; domain-model=launchdarkly.semanticpatch ``` If you call a semantic patch resource without this header, you will receive a `400` response because your semantic patch will be interpreted as a JSON patch. The body of a semantic patch request takes the following properties: * `comment` (string): (Optional) A description of the update. * `environmentKey` (string): (Required for some resources only) The environment key. * `instructions` (array): (Required) A list of actions the update should perform. Each action in the list must be an object with a `kind` property that indicates the instruction. If the instruction requires parameters, you must include those parameters as additional fields in the object. The documentation for each resource that supports semantic patch includes the available instructions and any additional parameters. For example: ```json { "comment": "optional comment", "instructions": [ {"kind": "turnFlagOn"} ] } ``` Semantic patches are not applied partially; either all of the instructions are applied or none of them are. If **any** instruction is invalid, the endpoint returns an error and will not change the resource. If all instructions are valid, the request succeeds and the resources are updated if necessary, or left unchanged if they are already in the state you request. ### Updates with comments You can submit optional comments with `PATCH` changes. To submit a comment along with a JSON patch document, use the following format: ```json { "comment": "This is a comment string", "patch": [{ "op": "replace", "path": "/description", "value": "The new description" }] } ``` To submit a comment along with a JSON merge patch document, use the following format: ```json { "comment": "This is a comment string", "merge": { "description": "New flag description" } } ``` To submit a comment along with a semantic patch, use the following format: ```json { "comment": "This is a comment string", "instructions": [ {"kind": "turnFlagOn"} ] } ``` ## Errors The API always returns errors in a common format. Here's an example: ```json { "code": "invalid_request", "message": "A feature with that key already exists", "id": "30ce6058-87da-11e4-b116-123b93f75cba" } ``` The `code` indicates the general class of error. The `message` is a human-readable explanation of what went wrong. The `id` is a unique identifier. Use it when you're working with LaunchDarkly Support to debug a problem with a specific API call. ### HTTP status error response codes | Code | Definition | Description | Possible Solution | | ---- | ----------------- | ------------------------------------------------------------------------------------------- | ---------------------------------------------------------------- | | 400 | Invalid request | The request cannot be understood. | Ensure JSON syntax in request body is correct. | | 401 | Invalid access token | Requestor is unauthorized or does not have permission for this API call. | Ensure your API access token is valid and has the appropriate permissions. | | 403 | Forbidden | Requestor does not have access to this resource. | Ensure that the account member or access token has proper permissions set. | | 404 | Invalid resource identifier | The requested resource is not valid. | Ensure that the resource is correctly identified by ID or key. | | 405 | Method not allowed | The request method is not allowed on this resource. | Ensure that the HTTP verb is correct. | | 409 | Conflict | The API request can not be completed because it conflicts with a concurrent API request. | Retry your request. | | 422 | Unprocessable entity | The API request can not be completed because the update description can not be understood. | Ensure that the request body is correct for the type of patch you are using, either JSON patch or semantic patch. | 429 | Too many requests | Read [Rate limiting](https://launchdarkly.com/docs/api#rate-limiting). | Wait and try again later. | ## CORS The LaunchDarkly API supports Cross Origin Resource Sharing (CORS) for AJAX requests from any origin. If an `Origin` header is given in a request, it will be echoed as an explicitly allowed origin. Otherwise the request returns a wildcard, `Access-Control-Allow-Origin: *`. For more information on CORS, read the [CORS W3C Recommendation](http://www.w3.org/TR/cors). Example CORS headers might look like: ```http Access-Control-Allow-Headers: Accept, Content-Type, Content-Length, Accept-Encoding, Authorization Access-Control-Allow-Methods: OPTIONS, GET, DELETE, PATCH Access-Control-Allow-Origin: * Access-Control-Max-Age: 300 ``` You can make authenticated CORS calls just as you would make same-origin calls, using either [token or session-based authentication](https://launchdarkly.com/docs/api#authentication). If you are using session authentication, you should set the `withCredentials` property for your `xhr` request to `true`. You should never expose your access tokens to untrusted entities. ## Rate limiting We use several rate limiting strategies to ensure the availability of our APIs. Rate-limited calls to our APIs return a `429` status code. Calls to our APIs include headers indicating the current rate limit status. The specific headers returned depend on the API route being called. The limits differ based on the route, authentication mechanism, and other factors. Routes that are not rate limited may not contain any of the headers described below. > ### Rate limiting and SDKs > > LaunchDarkly SDKs are never rate limited and do not use the API endpoints defined here. LaunchDarkly uses a different set of approaches, including streaming/server-sent events and a global CDN, to ensure availability to the routes used by LaunchDarkly SDKs. ### Global rate limits Authenticated requests are subject to a global limit. This is the maximum number of calls that your account can make to the API per ten seconds. All service and personal access tokens on the account share this limit, so exceeding the limit with one access token will impact other tokens. Calls that are subject to global rate limits may return the headers below: | Header name | Description | | ------------------------------ | -------------------------------------------------------------------------------- | | `X-Ratelimit-Global-Remaining` | The maximum number of requests the account is permitted to make per ten seconds. | | `X-Ratelimit-Reset` | The time at which the current rate limit window resets in epoch milliseconds. | We do not publicly document the specific number of calls that can be made globally. This limit may change, and we encourage clients to program against the specification, relying on the two headers defined above, rather than hardcoding to the current limit. ### Route-level rate limits Some authenticated routes have custom rate limits. These also reset every ten seconds. Any service or personal access tokens hitting the same route share this limit, so exceeding the limit with one access token may impact other tokens. Calls that are subject to route-level rate limits return the headers below: | Header name | Description | | ----------------------------- | ----------------------------------------------------------------------------------------------------- | | `X-Ratelimit-Route-Remaining` | The maximum number of requests to the current route the account is permitted to make per ten seconds. | | `X-Ratelimit-Reset` | The time at which the current rate limit window resets in epoch milliseconds. | A _route_ represents a specific URL pattern and verb. For example, the [Delete environment](https://launchdarkly.com/docs/api/environments/delete-environment) endpoint is considered a single route, and each call to delete an environment counts against your route-level rate limit for that route. We do not publicly document the specific number of calls that an account can make to each endpoint per ten seconds. These limits may change, and we encourage clients to program against the specification, relying on the two headers defined above, rather than hardcoding to the current limits. ### IP-based rate limiting We also employ IP-based rate limiting on some API routes. If you hit an IP-based rate limit, your API response will include a `Retry-After` header indicating how long to wait before re-trying the call. Clients must wait at least `Retry-After` seconds before making additional calls to our API, and should employ jitter and backoff strategies to avoid triggering rate limits again. ## OpenAPI (Swagger) and client libraries We have a [complete OpenAPI (Swagger) specification](https://app.launchdarkly.com/api/v2/openapi.json) for our API. We auto-generate multiple client libraries based on our OpenAPI specification. To learn more, visit the [collection of client libraries on GitHub](https://github.com/search?q=topic%3Alaunchdarkly-api+org%3Alaunchdarkly&type=Repositories). Alternatively, you can use the specification to generate client libraries to interact with our REST API in your language of choice. Or, you can refer to our API endpoints' documentation for guidance on how to make requests with a common HTTP library in your language of choice. Our OpenAPI specification is supported by several API-based tools such as Postman and Insomnia. In many cases, you can directly import our specification to explore our APIs. ## Method overriding Some firewalls and HTTP clients restrict the use of verbs other than `GET` and `POST`. In those environments, our API endpoints that use `DELETE`, `PATCH`, and `PUT` verbs are inaccessible. To avoid this issue, our API supports the `X-HTTP-Method-Override` header, allowing clients to "tunnel" `DELETE`, `PATCH`, and `PUT` requests using a `POST` request. For example, to call a `PATCH` endpoint using a `POST` request, you can include `X-HTTP-Method-Override:PATCH` as a header. ## Beta resources We sometimes release new API resources in **beta** status before we release them with general availability. Resources that are in beta are still undergoing testing and development. They may change without notice, including becoming backwards incompatible. We try to promote resources into general availability as quickly as possible. This happens after sufficient testing and when we're satisfied that we no longer need to make backwards-incompatible changes. We mark beta resources with a "Beta" callout in our documentation, pictured below: > ### This feature is in beta > > To use this feature, pass in a header including the `LD-API-Version` key with value set to `beta`. Use this header with each call. To learn more, read [Beta resources](https://launchdarkly.com/docs/api#beta-resources). > > Resources that are in beta are still undergoing testing and development. They may change without notice, including becoming backwards incompatible. ### Using beta resources To use a beta resource, you must include a header in the request. If you call a beta resource without this header, you receive a `403` response. Use this header: ``` LD-API-Version: beta ``` ## Federal and EU environments In addition to the commercial versions, LaunchDarkly offers instances for federal agencies and those based in the European Union (EU). ### Federal environments The version of LaunchDarkly that is available on domains controlled by the United States government is different from the version of LaunchDarkly available to the general public. If you are an employee or contractor for a United States federal agency and use LaunchDarkly in your work, you likely use the federal instance of LaunchDarkly. If you are working in the federal instance of LaunchDarkly, the base URI for each request is `https://app.launchdarkly.us`. To learn more, read [LaunchDarkly in federal environments](https://launchdarkly.com/docs/home/infrastructure/federal). ### EU environments The version of LaunchDarkly that is available in the EU is different from the version of LaunchDarkly available to other regions. If you are based in the EU, you likely use the EU instance of LaunchDarkly. The LaunchDarkly EU instance complies with EU data residency principles, including the protection and confidentiality of EU customer information. If you are working in the EU instance of LaunchDarkly, the base URI for each request is `https://app.eu.launchdarkly.com`. To learn more, read [LaunchDarkly in the European Union (EU)](https://launchdarkly.com/docs/home/infrastructure/eu). ## Versioning We try hard to keep our REST API backwards compatible, but we occasionally have to make backwards-incompatible changes in the process of shipping new features. These breaking changes can cause unexpected behavior if you don't prepare for them accordingly. Updates to our REST API include support for the latest features in LaunchDarkly. We also release a new version of our REST API every time we make a breaking change. We provide simultaneous support for multiple API versions so you can migrate from your current API version to a new version at your own pace. ### Setting the API version per request You can set the API version on a specific request by sending an `LD-API-Version` header, as shown in the example below: ``` LD-API-Version: 20240415 ``` The header value is the version number of the API version you would like to request. The number for each version corresponds to the date the version was released in `yyyymmdd` format. In the example above the version `20240415` corresponds to April 15, 2024. ### Setting the API version per access token When you create an access token, you must specify a specific version of the API to use. This ensures that integrations using this token cannot be broken by version changes. Tokens created before versioning was released have their version set to `20160426`, which is the version of the API that existed before the current versioning scheme, so that they continue working the same way they did before versioning. If you would like to upgrade your integration to use a new API version, you can explicitly set the header described above. > ### Best practice: Set the header for every client or integration > > We recommend that you set the API version header explicitly in any client or integration you build. > > Only rely on the access token API version during manual testing. ### API version changelog <table> <tr> <th>Version</th> <th>Changes</th> <th>End of life (EOL)</th> </tr> <tr> <td>`20240415`</td> <td> <ul><li>Changed several endpoints from unpaginated to paginated. Use the `limit` and `offset` query parameters to page through the results.</li> <li>Changed the [list access tokens](https://launchdarkly.com/docs/api/access-tokens/get-tokens) endpoint: <ul><li>Response is now paginated with a default limit of `25`</li></ul></li> <li>Changed the [list account members](https://launchdarkly.com/docs/api/account-members/get-members) endpoint: <ul><li>The `accessCheck` filter is no longer available</li></ul></li> <li>Changed the [list custom roles](https://launchdarkly.com/docs/api/custom-roles/get-custom-roles) endpoint: <ul><li>Response is now paginated with a default limit of `20`</li></ul></li> <li>Changed the [list feature flags](https://launchdarkly.com/docs/api/feature-flags/get-feature-flags) endpoint: <ul><li>Response is now paginated with a default limit of `20`</li><li>The `environments` field is now only returned if the request is filtered by environment, using the `filterEnv` query parameter</li><li>The `followerId`, `hasDataExport`, `status`, `contextKindTargeted`, and `segmentTargeted` filters are no longer available</li><li>The `compare` query parameter is no longer available</li></ul></li> <li>Changed the [list segments](https://launchdarkly.com/docs/api/segments/get-segments) endpoint: <ul><li>Response is now paginated with a default limit of `20`</li></ul></li> <li>Changed the [list teams](https://launchdarkly.com/docs/api/teams/get-teams) endpoint: <ul><li>The `expand` parameter no longer supports including `projects` or `roles`</li><li>In paginated results, the maximum page size is now 100</li></ul></li> <li>Changed the [get workflows](https://launchdarkly.com/docs/api/workflows/get-workflows) endpoint: <ul><li>Response is now paginated with a default limit of `20`</li><li>The `_conflicts` field in the response is no longer available</li></ul></li> </ul> </td> <td>Current</td> </tr> <tr> <td>`20220603`</td> <td> <ul><li>Changed the [list projects](https://launchdarkly.com/docs/api/projects/get-projects) return value:<ul><li>Response is now paginated with a default limit of `20`.</li><li>Added support for filter and sort.</li><li>The project `environments` field is now expandable. This field is omitted by default.</li></ul></li><li>Changed the [get project](https://launchdarkly.com/docs/api/projects/get-project) return value:<ul><li>The `environments` field is now expandable. This field is omitted by default.</li></ul></li></ul> </td> <td>2025-04-15</td> </tr> <tr> <td>`20210729`</td> <td> <ul><li>Changed the [create approval request](https://launchdarkly.com/docs/api/approvals/post-approval-request) return value. It now returns HTTP Status Code `201` instead of `200`.</li><li> Changed the [get user](https://launchdarkly.com/docs/api/users/get-user) return value. It now returns a user record, not a user. </li><li>Added additional optional fields to environment, segments, flags, members, and segments, including the ability to create big segments. </li><li> Added default values for flag variations when new environments are created. </li><li>Added filtering and pagination for getting flags and members, including `limit`, `number`, `filter`, and `sort` query parameters. </li><li>Added endpoints for expiring user targets for flags and segments, scheduled changes, access tokens, Relay Proxy configuration, integrations and subscriptions, and approvals. </li></ul> </td> <td>2023-06-03</td> </tr> <tr> <td>`20191212`</td> <td> <ul><li>[List feature flags](https://launchdarkly.com/docs/api/feature-flags/get-feature-flags) now defaults to sending summaries of feature flag configurations, equivalent to setting the query parameter `summary=true`. Summaries omit flag targeting rules and individual user targets from the payload. </li><li> Added endpoints for flags, flag status, projects, environments, audit logs, members, users, custom roles, segments, usage, streams, events, and data export. </li></ul> </td> <td>2022-07-29</td> </tr> <tr> <td>`20160426`</td> <td> <ul><li>Initial versioning of API. Tokens created before versioning have their version set to this.</li></ul> </td> <td>2020-12-12</td> </tr> </table> To learn more about how EOL is determined, read LaunchDarkly's [End of Life (EOL) Policy](https://launchdarkly.com/policies/end-of-life-policy/).

:title: The Ruby API :section: PYAPNS::Client There's python in my ruby! This is a class used to send notifications, provision applications and retrieve feedback using the Apple Push Notification Service. PYAPNS is a multi-application APS provider, meaning it is possible to send notifications to any number of different applications from the same application and same server. It is also possible to scale the client to any number of processes and servers, simply balanced behind a simple web proxy. It may seem like overkill for such a bare interface - after all, the APS service is rather simplistic. However, PYAPNS takes no shortcuts when it comes to completeness/compliance with the APNS protocol and allows the user many optimization and scaling vectors not possible with other libraries. No bandwidth is wasted, connections are persistent and the server is asynchronous therefore notifications are delivered immediately. PYAPNS takes after the design of 3rd party push notification service that charge a fee each time you push a notification, and charge extra for so-called 'premium' service which supposedly gives you quicker access to the APS servers. However, PYAPNS is free, as in beer and offers more scaling opportunities without the financial draw. :section: Provisioning To add your app to the PYAPNS server, it must be `provisioned` at least once. Normally this is done once upon the start-up of your application, be it a web service, desktop application or whatever... It must be done at least once to the server you're connecting to. Multiple instances of PYAPNS will have to have their applications provisioned individually. To provision an application manually use the `PYAPNS::Client#provision` method. require 'pyapns' client = PYAPNS::Client.configure client.provision :app_id => 'cf', :cert => '/home/ss/cert.pem', :env => 'sandbox', :timeout => 15 This basically says "add an app reference named 'cf' to the server and start a connection using the certification, and if it can't within 15 seconds, raise a `PYAPNS::TimeoutException` That's all it takes to get started. Of course, this can be done automatically by using PYAPNS::ClientConfiguration middleware. `PYAPNS::Client` is a singleton class that is configured using the class method `PYAPNS::Client#configure`. It is sensibly configured by default, but can be customized by specifying a hash See the docs on `PYAPNS::ClientConfiguration` for a list of available configuration parameters (some of these are important, and you can specify initial applications) to be configured by default. :section: Sending Notifications Once your client is configured, and application provisioned (again, these should be taken care of before you write notification code) you can begin sending notifications to users. If you're wondering how to acquire a notification token, you've come to the wrong place... I recommend using google. However, if you want to send hundreds of millions of notifications to users, here's how it's done, one at a time... The `PYAPNS::Client#notify` is a sort of polymorphic method which can notify any number of devices at a time. It's basic form is as follows: client.notify 'cf', 'long ass app token', {:aps=> {:alert => 'hello?'}} However, as stated before, it is sort of polymorphic: client.notify 'cf', ['token', 'token2', 'token3'], [alert, alert2, alert3] client.notify :app_id => 'cf', :tokens => 'mah token', :notifications => alertHash client.notify 'cf', 'token', PYAPNS::Notification('hello tits!') As you can see, the method accepts paralell arrays of tokens and notifications meaning any number of notifications can be sent at once. Hashes will be automatically converted to `PYAPNS::Notification` objects so they can be optimized for the wire (nil values removed, etc...), and you can pass `PYAPNS::Notification` objects directly if you wish. :section: Retrieving Feedback The APS service offers a feedback functionality that allows application servers to retrieve a list of device tokens it deems to be no longer in use, and the time it thinks they stopped being useful (the user uninstalled your app, better luck next time...) Sounds pretty straight forward, and it is. Apple recommends you do this at least once an hour. PYAPNS will return a list of 2-element lists with the date and the token: feedbacks = client.feedback 'cf' :section: Asynchronous Calls PYAPNS::Client will, by default, perform no funny stuff and operate entirely within the calling thread. This means that certain applications may hang when, say, sending a notification, if only for a fraction of a second. Obviously not a desirable trait, all `provision`, `feedback` and `notify` methods also take a block, which indicates to the method you want to call PYAPNS asynchronously, and it will be done so handily in another thread, calling back your block with a single argument when finished. Note that `notify` and `provision` return absolutely nothing (nil, for you rub--wait you are ruby developers!). It is probably wise to always use this form of operation so your calling thread is never blocked (especially important in UI-driven apps and asynchronous servers) Just pass a block to provision/notify/feedback like so: PYAPNS::Client.instance.feedback do |feedbacks| feedbacks.each { |f| trim_token f } end :section: PYAPNS::ClientConfiguration A middleware class to make `PYAPNS::Client` easy to use in web contexts Automates configuration of the client in Rack environments using a simple confiuration middleware. To use `PYAPNS::Client` in Rack environments with the least code possible `use PYAPNS::ClientConfiguration` (no, really, in some cases, that's all you need!) middleware with an optional hash specifying the client variables. Options are as follows: use PYAPNS::ClientConfiguration( :host => 'http://localhost/' :port => 7077, :initial => [{ :app_id => 'myapp', :cert => '/home/myuser/apps/myapp/cert.pem', :env => 'sandbox', :timeout => 15 }]) Where the configuration variables are defined: :host String the host where the server can be found :port Number the port to which the client should connect :initial Array OPTIONAL - an array of INITIAL hashes INITIAL HASHES: :app_id String the id used to send messages with this certification can be a totally arbitrary value :cert String a path to the certification or the certification file as a string :env String the environment to connect to apple with, always either 'sandbox' or 'production' :timoeut Number The timeout for the server to use when connecting to the apple servers :section: PYAPNS::Notification An APNS Notification You can construct notification objects ahead of time by using this class. However unnecessary, it allows you to programmatically generate a Notification like so: note = PYAPNS::Notification.new 'alert text', 9, 'flynn.caf', {:extra => 'guid'} -- or -- note = PYAPNS::Notification.new 'alert text' These can be passed to `PYAPNS::Client#notify` the same as hashes

No description provided.

No description provided.