Results for simple-binary-install

Simple command line creation and editing of Evernote notes in Markdown format with your favorite editor via a gem installed binary

(This is Alex's version of Showoff, so I can share my presentations \ without waiting for pull requests and updates from busy Scott. It installs a binary called "showoff" which overwrites the official one, so if you install this hack, be careful about updates.) ShowOff is a Sinatra web app that reads simple configuration files for a presentation. It is sort of like a Keynote web app engine. I am using it to do all my talks in 2010, because I have a deep hatred in my heart for Keynote and yet it is by far the best in the field. \ The idea is that you setup your slide files in section subdirectories and then startup the showoff server in that directory. It will read in your showoff.json file for which sections go in which order and then will give you a URL to present from.

Log2json lets you read, filter and send logs as JSON objects via Unix pipes. It is inspired by Logstash, and is meant to be compatible with it at the JSON event/record level so that it can easily work with Kibana. Reading logs is done via a shell script(eg, `tail`) running in its own process. You then configure(see the `syslog2json` or the `nginxlog2json` script for examples) and run your filters in Ruby using the `Log2Json` module and its contained helper classes. `Log2Json` reads from stdin the logs(one log record per line), parses the log lines into JSON records, and then serializes and writes the records to stdout, which then can be piped to another process for processing or sending it to somewhere else. Currently, Log2json ships with a `tail-log` script that can be run as the input process. It's the same as using the Linux `tail` utility with the `-v -F` options except that it also tracks the positions(as the numbers of lines read from the beginning of the files) in a few files in the file system so that if the input process is interrupted, it can continue reading from where it left off next time if the files had been followed. This feature is similar to the sincedb feature in Logstash's file input. Note: If you don't need the tracking feature(ie, you are fine with always tailling from the end of file with `-v -F -n0`), then you can just use the `tail` utility that comes with your Linux distribution.(Or more specifically, the `tail` from the GNU coreutils). Other versions of the `tail` utility may also work, but are not tested. The input protocol expected by Log2json is very simple and documented in the source code. ** The `tail-log` script uses a patched version of `tail` from the GNU coreutils package. A binary of the `tail` utility compiled for Ubuntu 12.04 LTS is included with the Log2json gem. If the binary doesn't work for your distribution, then you'll need to get GNU coreutils-8.13, apply the patch(it can be found in the src/ directory of the installed gem), and then replace the bin/tail binary in the directory of the installed gem with your version of the binary. ** P.S. If you know of a way to configure and compile ONLY the tail program in coreutils, please let me know! The reason I'm not building tail post gem installation is that it takes too long to configure && make because that actually builds every utilties in coreutils. For shipping logs to Redis, there's the `lines2redis` script that can be used as the output process in the pipe. For shipping logs from Redis to ElasticSearch, Log2json provides a `redis2es` script. Finally here's an example of Log2json in action: From a client machine: tail-log /var/log/{sys,mail}log /var/log/{kern,auth}.log | syslog2json | queue=jsonlogs \ flush_size=20 \ flush_interval=30 \ lines2redis host.to.redis.server 6379 0 # use redis DB 0 On the Redis server: redis_queue=jsonlogs redis2es host.to.es.server Resources that help writing log2json filters: - look at log2json.rb source and example filters - http://grokdebug.herokuapp.com/ - http://www.ruby-doc.org/stdlib-1.9.3/libdoc/date/rdoc/DateTime.html#method-i-strftime

Log2json lets you read, filter and send logs as JSON objects via Unix pipes. It is inspired by Logstash, and is meant to be compatible with it at the JSON event/record level so that it can easily work with Kibana. Reading logs is done via a shell script(eg, `tail`) running in its own process. You then configure(see the `syslog2json` or the `nginxlog2json` script for examples) and run your filters in Ruby using the `Log2Json` module and its contained helper classes. `Log2Json` reads from stdin the logs(one log record per line), parses the log lines into JSON records, and then serializes and writes the records to stdout, which then can be piped to another process for processing or sending it to somewhere else. Currently, Log2json ships with a `tail-log` script that can be run as the input process. It's the same as using the Linux `tail` utility with the `-v -F` options except that it also tracks the positions(as the numbers of lines read from the beginning of the files) in a few files in the file system so that if the input process is interrupted, it can continue reading from where it left off next time if the files had been followed. This feature is similar to the sincedb feature in Logstash's file input. Note: If you don't need the tracking feature(ie, you are fine with always tailling from the end of file with `-v -F -n0`), then you can just use the `tail` utility that comes with your Linux distribution.(Or more specifically, the `tail` from the GNU coreutils). Other versions of the `tail` utility may also work, but are not tested. The input protocol expected by Log2json is very simple and documented in the source code. ** The `tail-log` script uses a patched version of `tail` from the GNU coreutils package. A binary of the `tail` utility compiled for Ubuntu 12.04 LTS is included with the Log2json gem. If the binary doesn't work for your distribution, then you'll need to get GNU coreutils-8.13, apply the patch(it can be found in the src/ directory of the installed gem), and then replace the bin/tail binary in the directory of the installed gem with your version of the binary. ** P.S. If you know of a way to configure and compile ONLY the tail program in coreutils, please let me know! The reason I'm not building tail post gem installation is that it takes too long to configure && make because that actually builds every utilties in coreutils. For shipping logs to Redis, there's the `lines2redis` script that can be used as the output process in the pipe. For shipping logs from Redis to ElasticSearch, Log2json provides a `redis2es` script. Finally here's an example of Log2json in action: From a client machine: tail-log /var/log/{sys,mail}log /var/log/{kern,auth}.log | syslog2json | queue=jsonlogs \ flush_size=20 \ flush_interval=30 \ lines2redis host.to.redis.server 6379 0 # use redis DB 0 On the Redis server: redis_queue=jsonlogs redis2es host.to.es.server Resources that help writing log2json filters: - look at log2json.rb source and example filters - http://grokdebug.herokuapp.com/ - http://www.ruby-doc.org/stdlib-1.9.3/libdoc/date/rdoc/DateTime.html#method-i-strftime

= id3lib-ruby id3lib-ruby provides a Ruby interface to the id3lib C++ library for easily editing ID3 tags (v1 and v2) of MP3 audio files. The class documentation starts at ID3Lib::Tag. == Features * Read and write ID3v1 and ID3v2 tags * Simple interface for adding, changing and removing frames * Quick access to common text frames like title and performer * Custom data frames like attached picture (APIC) * Pretty complete coverage of id3lib's features * UTF-16 support (warning: id3lib writes broken UTF-16 frames) * Windows binary gem available The CHANGES file contains a list of changes between versions. == Installation See INSTALL. == Online Information The home of id3lib-ruby is http://id3lib-ruby.rubyforge.org == Usage require 'rubygems' require 'id3lib' # Load a tag from a file tag = ID3Lib::Tag.new('talk.mp3') # Get and set text frames with convenience methods tag.title #=> "Talk" tag.album = 'X&Y' tag.track = '5/13' # Tag is a subclass of Array and each frame is a Hash tag[0] #=> { :id => :TPE1, :textenc => 0, :text => "Coldplay" } # Get the number of frames tag.length #=> 7 # Remove all comment frames tag.delete_if{ |frame| frame[:id] == :COMM } # Get info about APIC frame to see which fields are allowed ID3Lib::Info.frame(:APIC) #=> [ 2, :APIC, "Attached picture", #=> [:textenc, :mimetype, :picturetype, :description, :data] ] # Add an attached picture frame cover = { :id => :APIC, :mimetype => 'image/jpeg', :picturetype => 3, :description => 'A pretty picture', :textenc => 0, :data => File.read('cover.jpg') } tag << cover # Last but not least, apply changes tag.update! == Licence This library has Ruby's licence: http://www.ruby-lang.org/en/LICENSE.txt == Author Robin Stocker <robinstocker at rubyforge.org>

No description provided.

No description provided.