Results for super-email

Super simple authentication system for Rails, using username, email and password.

Super simple authentication system for Rails, using username, email and password.

One stop shop for sending sms via email.

One stop shop for sending sms via email.

The OhMySMTP Rails Gem is a plug in for ActionMailer to send emails via OhMySMTP to make sending emails from Rails apps super simple.

The MailPace Rails Gem is a plug in for ActionMailer to send emails via MailPace to make sending emails from Rails apps super simple.

NanoAuth is a super stripped down Rails authentication module. It's comprised (so far) of one file that provides some additional methods to be mixed in to your User model. Over the years I kept tweaking code in various projects and continued to see the same boiler plate code for: * authentication a user via User.authenticate(email,password) * encrypt(password) * authenticated?(password) \ So I decided on some down time to pull all this stuff out and make a nice little gem of it.

== Devise::Revokable A module for Devise[http://github.com/plataformatec/devise] This gem was created by "borrowing" heavily from Devise::Invitable[http://github.com/scambra/devise_invitable] It exists to extend Devise to provide the basis for what is essentially the reverse of the standard <tt>confirmable</tt> module. Where <tt>confirmable</tt> sends an email and awaits a response, before confirming a new registration, <tt>revokable</tt> allows immediate access and sends an email which provides a link to "revoke" the account if it was created fraudulently. This is useful if you want to lower the barrier to entry to creating accounts, and clearly, if account security isn't a concern. Note that tests are non-existent. Use freely but at your own risk. === Configuring It works like normal Devise modules. Add the <tt>:revokable</tt> module to the declaration. # in user.rb devise :revokable # plus other devise modules If the user who received the revocation email follows the provided link and confirms revocation, the account will effectively be "revoked" and inactive, unable to log in. Additionally, you may want to override <tt>#revoke!</tt> to perfom additional revocation on the account, e.g. deleting posts made, resetting personal information, etc. The super method yields to a block for this purpose. # in user.rb def revoke! super do self.some_method_that_resets_me! end end That's about the extent of it. As with typical devise modules you can override the mailers and views with your own. Additionally you can define the module accessor <tt>@@mailer</tt> on the module with a proc to handle your mail if you need to. This proc is yielded two arguments, the method name (e.g. :revocation_instructions), and the affected resource. # in config/initializers/devise_revokable.rb require 'devise_revokable' require 'my_mailer' DeviseRevokable.mailer = proc {|method_name, resource| MyMailer.send(:method_name, resource) }

Inventory Inventory keeps track of the contents of your Ruby¹ projects. Such an inventory can be used to load the project, create gem specifications and gems, run unit tests, compile extensions, and verify that the project’s content is what you think it is. ¹ See http://ruby-lang.org/ § Usage Let’s begin by discussing the project structure that Inventory expects you to use. It’s pretty much exactly the same as the standard Ruby project structure¹: ├── README ├── Rakefile ├── lib │ ├── foo-1.0 │ │ ├── bar.rb │ │ └── version.rb │ └── foo-1.0.rb └── test └── unit ├── foo-1.0 │ ├── bar.rb │ └── version.rb └── foo-1.0.rb Here you see a simplified version of a project called “Foo”’s project structure. The only real difference from the standard is that the main entry point into the library is named “foo-1.0.rb” instead of “foo.rb” and that the root sub-directory of “lib” is similarly named “foo-1.0” instead of “foo”. The difference is the inclusion of the API version. This must be the major version of the project followed by a constant “.0”. The reason for this is that it allows concurrent installations of different major versions of the project and means that the wrong version will never accidentally be loaded with require. There’s a bigger difference in the content of the files. ‹Lib/foo-1.0/version.rb› will contain our inventory instead of a String: require 'inventory-1.0' class Foo Version = Foo.new(1, 4, 0){ authors{ author 'A. U. Thor', 'a.u.thor@example.org' } homepage 'http://example.org/' licenses{ license 'LGPLv3+', 'GNU Lesser General Public License, version 3 or later', 'http://www.gnu.org/licenses/' } def dependencies super + Dependencies.new{ development 'baz', 1, 3, 0 runtime 'goo', 2, 0, 0 optional 'roo-loo', 3, 0, 0, :feature =&gt; 'roo-loo' } end def package_libs %w[bar.rb] end } end We’re introducing quite a few concepts at once, and we’ll look into each in greater detail, but we begin by setting the ‹Version› constant to a new instance of an Inventory with major, minor, and patch version atoms 1, 4, and 0. Then we add a couple of dependencies and list the library files that are included in this project. The version numbers shouldn’t come as a surprise. These track the version of the API that we’re shipping using {semantic versioning}². They also allow the Inventory#to_s method to act as if you’d defined Version as ‹'1.4.0'›. Next follows information about the authors of the project, the project’s homepage, and the project’s licenses. Each author has a name and an email address. The homepage is simply a string URL. Licenses have an abbreviation, a name, and a URL where the license text can be found. We then extend the definition of ‹dependencies› by adding another set of dependencies to ‹super›. ‹Super› includes a dependency on the version of the inventory project that’s being used with this project, so you’ll never have to list that yourself. The other three dependencies are all of different kinds: development, runtime, and optional. A development dependency is one that’s required while developing the project, for example, a unit-testing framework, a documentation generator, and so on. Runtime dependencies are requirements of the project to be able to run, both during development and when installed. Finally, optional dependencies are runtime dependencies that may or may not be required during execution. The difference between runtime and optional is that the inventory won’t try to automatically load an optional dependency, instead leaving that up to you to do when and if it becomes necessary. By that logic, runtime dependencies will be automatically loaded, which is a good reason for having dependency information available at runtime. The version numbers of dependencies also use semantic versioning, but note that the patch atom is ignored unless the major atom is 0. You should always only depend on the major and minor atoms. As mentioned, runtime dependencies will be automatically loaded and the feature they try to load is based on the name of the dependency with a “-X.0” tacked on the end, where ‘X’ is the major version of the dependency. Sometimes, this isn’t correct, in which case the :feature option may be given to specify the name of the feature. You may also override other parts of a dependency by passing in a block to the dependency, much like we’re doing for inventories. The rest of an inventory will list the various files included in the project. This project only consists of one additional file to those that an inventory automatically include (Rakefile, README, the main entry point, and the version.rb file that defines the inventory itself), namely the library file ‹bar.rb›. Library files will be loaded automatically when the main entry point file loads the inventory. Library files that shouldn’t be loaded may be listed under a different heading, namely “additional_libs”. Both these sets of files will be used to generate a list of unit test files automatically, so each library file will have a corresponding unit test file in the inventory. We’ll discuss the different headings of an inventory in more detail later on. Now that we’ve written our inventory, let’s set it up so that it’s content gets loaded when our main entry point gets loaded. We add the following piece of code to ‹lib/foo-1.0.rb›: module Foo load File.expand_path('../foo-1.0/version.rb', __FILE__) Version.load end That’s all there’s to it. The inventory can also be used to great effect from a Rakefile using a separate project called Inventory-Rake³. Using it’ll give us tasks for cleaning up our project, compiling extensions, installing dependencies, installing and uninstalling the project itself, and creating and pushing distribution files to distribution points. require 'inventory-rake-1.0' load File.expand_path('../lib/foo-1.0/version.rb', __FILE__) Inventory::Rake::Tasks.define Foo::Version Inventory::Rake::Tasks.unless_installing_dependencies do require 'lookout-rake-3.0' Lookout::Rake::Tasks::Test.new end It’s ‹Inventory::Rake::Tasks.define› that does the heavy lifting. It takes our inventory and sets up the tasks mentioned above. As we want to be able to use our Rakefile to install our dependencies for us, the rest of the Rakefile is inside the conditional #unless_installing_dependencies, which, as the name certainly implies, executes its block unless the task being run is the one that installs our dependencies. This becomes relevant when we set up Travis⁴ integration next. The only conditional set-up we do in our Rakefile is creating our test task via Lookout-Rake⁵, which also uses our inventory to find the unit tests to run when executed. Travis integration is straightforward. Simply put before_script: - gem install inventory-rake -v '~&gt; VERSION' --no-rdoc --no-ri - rake gem:deps:install in the project’s ‹.travis.yml› file, replacing ‹VERSION› with the version of Inventory-Rake that you require. This’ll make sure that Travis installs all development, runtime, and optional dependencies that you’ve listed in your inventory before running any tests. You might also need to put env: - RUBYOPT=rubygems in your ‹.travis.yml› file, depending on how things are set up. ¹ Ruby project structure: http://guides.rubygems.org/make-your-own-gem/ ² Semantic versioning: http://semver.org/ ³ Inventory-Rake: http://disu.se/software/inventory-rake-1.0/ ⁴ Travis: http://travis-ci.org/ ⁵ Lookout-Rake: http://disu.se/software/lookout-rake-3.0/ § API If the guide above doesn’t provide you with all the answers you seek, you may refer to the API¹ for more answers. ¹ See http://disu.se/software/inventory-1.0/api/Inventory/ § Financing Currently, most of my time is spent at my day job and in my rather busy private life. Please motivate me to spend time on this piece of software by donating some of your money to this project. Yeah, I realize that requesting money to develop software is a bit, well, capitalistic of me. But please realize that I live in a capitalistic society and I need money to have other people give me the things that I need to continue living under the rules of said society. So, if you feel that this piece of software has helped you out enough to warrant a reward, please PayPal a donation to now@disu.se¹. Thanks! Your support won’t go unnoticed! ¹ Send a donation: https://www.paypal.com/cgi-bin/webscr?cmd=_donations&amp;business=now@disu.se&amp;item_name=Inventory § Reporting Bugs Please report any bugs that you encounter to the {issue tracker}¹. ¹ See https://github.com/now/inventory/issues § Authors Nikolai Weibull wrote the code, the tests, the documentation, and this README. § Licensing Inventory is free software: you may redistribute it and/or modify it under the terms of the {GNU Lesser General Public License, version 3}¹ or later², as published by the {Free Software Foundation}³. ¹ See http://disu.se/licenses/lgpl-3.0/ ² See http://gnu.org/licenses/ ³ See http://fsf.org/

Twitterpunch =============== Twitterpunch is designed to work with PhotoBooth and OS X Folder Actions. When this script is called with the name of an image file, it will post the image to Twitter, along with a message randomly chosen from a list and a specified hashtag. If you call the script with the `--stream` argument instead, it will listen for tweets to that hashtag and download them to a specified directory. If the tweet came from another user, Twitterpunch will speak it aloud. Typically, you'll run one copy on an OSX laptop with PhotoBooth, and a separate copy on another machine (either Windows or OSX) for the viewer. You can also use a mobile device as a remote control, if you like. This will allow the user to enter a custom message for each photo that gets tweeted out, if they'd like. Configuration =========== Configure the program via the `~/.twitterpunch/config.yaml` YAML file. This file should look similar to the example below. --- :twitter: # twitter configuration :consumer_key: &lt;consumer key&gt; :consumer_secret: &lt;consumer secret&gt; :access_token: &lt;access token&gt; :access_token_secret: &lt;access secret&gt; :messages: # list of messages to attach - Hello there # to outgoing tweets - I'm a posting fool - minimally viable product :hashtag: Twitterpunch # The hashtag to post and listen to :handle: Twitterpunch # The twitter username to post as :photodir: ~/Pictures/twitterpunch/ # Where to save downloaded images :logfile: ~/.twitterpunch/activity.log # Where to save logs :viewer: # Use the built-in slideshow viewer :count: 5 # How many images to have onscreen at once :remote: :timeout: 45 # How long the button should remain disabled for :apptitle: dslrBooth # The photo booth application title :hotkey: space # Which hotkey to send to trigger a photo 1. Generate a skeleton configuration file * `twitterpunch --configure` 1. Edit the configuration file as needed. You'll be prompted with the path. * If you have your own Twitter application credentials, you're welcome to use them. 1. Authorize the application with the Twitter API. * `twitterpunch --authorize` Usage ========== ### Using OS X PhotoBooth 1. Start PhotoBooth at least once to generate its library. 1. Install the Twitterpunch Folder Action * `twitterpunch --install` * It may claim that it could not be attached, fear not. 1. Profit! * _and by that, I mean take some shots with PhotoBooth!_ *Note*: if the folder action doesn't seem to work and photos aren't posted to Twitter, here are some troubleshooting steps to take: 1. Run Twitterpunch by hand with photos as arguments. This may help you isolate configuration or authorization issues. * `twitterpunch foo.jpg` 1. Correct the path in the workflow. * `which twitterpunch` * Edit the Twitterpunch folder action to include that path. #### Using the remote web app Configure the remote web app using the `:remote` hash in `config.yaml`. You can usually find the title of the app using `system_profiler -detailLevel full SPApplicationsDataType` and grepping for the name or path to the `.app`. In this example, the title is _dslrBooth_. [ben@ganymede] ~ $ system_profiler -detailLevel full SPApplicationsDataType | grep -B8 dslrBooth.app dslrBooth: Version: 2.9 Obtained from: Identified Developer Last Modified: 10/14/17, 9:50 PM Kind: Intel 64-Bit (Intel): Yes Signed by: Developer ID Application: Hope Pictures LLC (MZR5GHAQX4), Developer ID Certification Authority, Apple Root CA Location: /Applications/dslrBooth.app 1. Run the app with `twitterpunch --remote` 1. Browse to the app with http://{address}:8080 1. [optional] If on an iOS device, add to your homescreen * This will give you "app behaviour", such as full screen, and a nice icon #### Troubleshooting. 1. Make sure the folder action is installed properly 1. Use the Finder to navigate to `~/Pictures/` 1. Right click on the `Photo Booth Library` icon and choose _Show Package Contents_. 1. Right click on the `Pictures` folder and choose `Services &gt; Folder Actions Setup` 1. Make sure that the `Twitterpunch` action is attached. 1. Install the folder action 1. Open the `resources` folder of this gem. * Likely to be found in `/Library/Ruby/Gems/{version}/gems/twitterpunch-#{version}/resources/`. 1. Double click on the `Twitterpunch` folder action and install it. * It may claim that it could not be attached, fear not. ### Using something besides PhotoBooth Configure the program you are using for your photo shoot to call Twitterpunch each time it snaps a photo. Pass the name of the new photo as a command line argument. Alternatively, you could batch them, as Twitterpunch can accept multiple files at once. [ben@ganymede] ~ $ twitterpunch photo.jpg [photo2.jpg photo3.jpg photo4.jpg] You can manually install the Folder Action, or you can follow the automated install process after tweaking the workflow slightly. 1. Identify where the app stores the resulting image files. 1. Edit the Twitterpunch folder action to include that path. 1. Follow the steps above to install the Folder Action. ### Viewing the Twitter stream Twitterpunch will run on OS X or Windows equally well. Simply configure it on the computer that will act as the Twitter display and then run in streaming mode. [ben@ganymede] ~ $ twitterpunch --stream There are two modes that Twitterpunch can operate in. 1. If a `:hashtag` is defined then all images tweeted to the configured hashtag will be displayed in the slideshow. 1. Otherwise, Twitterpunch will stream the `:handle` Twitter user's stream and display all images either posted by that user or addressed to that user. With protected tweets, you can have rudimentary access control. In either mode, tweets that come from any other user will also be spoken aloud. If you don't want to use the built-in slideshow viewer, you can disable it by removing the `:viewer` key from your `~/.twitterpunch/config.yaml` config file. Twitterpunch will then simply download the tweeted images and save them into the `:photodir` directory. You can then use anything you like to view them. There are currently two decent viewing options I am aware of. * Windows background image: * Configure the Windows background to randomly cycle through photos in a directory. * Hide desktop icons. * Hide the taskbar. * Disable screensaver and power savings. * Drawbacks: You're using Windows and you have to install Ruby &amp; RubyGems manually. * OS X screensaver: * Choose one of the sexy screensavers and configure it to show photos from the `:photodir` * Set screensaver to a super short timeout. * Disable power savings. * Drawbacks: The screensaver doesn't reload dynamically, so I have to kick it and you'll see it reloading each time a new tweet comes in. Limitations =========== * It currently requires manual setup for Folder Actions. * Rubygame is kind of a pain to set up. Contact ======= * Author: Ben Ford * Email: binford2k@gmail.com * Twitter: @binford2k * IRC (Freenode): binford2k

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.