Results for unit-test-recorder

regression testing is all you need

Test result HTML recorder for capybara, test-unit, minitest, and RSpec

Uncool is a unit testing coverage tool that monitors tests recording all the methods covered for the tarageted namespaces.

Oracle enhanced adapter for Active Record. Additional patches to support ActiveRecord unit tests

Unit tests should be fast, active records (unless testing a complicated non data dependent business logic) should be connected to a database, but every time such a test method runs Rails will make sure Your fixtures are correctly loaded (and there's no way turning it off for particular tests).

Section9-unittest is an extension for Test::Unit. * 'describe' and 'it' are available (but 'before' and 'after' are not) * use 'verify_(actual) == expected' instead of 'assert_equal(expected, actual)' * register block which will be called at end of each test * integrated with Section9::Tmp and Section9::Recorder classes

This library provides a simple set of helper methods to manage slices and DNS zones/records on your Slicehost account (http://slicehost.com). == Capistrano tasks There are two capistrano tasks: cap slicehost:zone:add # Create DNS zone cap slicehost:zone:mx:google # Add Google Apps MX records To your config/deploy.rb, add the following: require "slicehost/recipes/capistrano" if Capistrano::Version::MAJOR >= 2 # Used to setup/update DNS registry of url => ip set :domain_mapping, "myurl.com" => "123.456.789.012" == Underlying API The current API is very alpha. It was just the simplest thing that worked. There are unit tests demonstrating it working and everything. Future releases will have a nicer, class-based API. Contact: Dr Nic Williams, drnicwilliams@gmail.com

A dynamic mock object framework for the .Net platform. It's purpose is to ease testing by allowing the developer to create mock implementations of custom objects and verify the interactions using unit testing. Rhino.Mocks is an attempt to create easier way to build and use mock objects and allow better refactoring support from the current tools. It's a hybrid approach between the pure Record/Replay of EasyMock.Net's model and NMock's expectation based model. Rhino.Mocks originated from EasyMock.Net and attempt to improve on their model to create easy to use and power mocking framework. It's free for use and modification for open source and commercial software.

{<img src="https://secure.travis-ci.org/socialcast/socialcast-shoulda-ext.png?branch=master" alt="Build Status" />}[http://travis-ci.org/socialcast/socialcast-shoulda-ext] = Socialcast Shoulda Extensions Adds new matchers and functionality to the shoulda test library = Installation In your Gemfile: group :test do gem 'socialcast_shoulda_ext', :git => 'git@github.com:socialcast/socialcast-shoulda-ext.git', :require => 'shoulda_ext' end If you want to include the trigger_callbacks matcher, also add the following to your test helper: ShouldaExt::Matchers::TriggerCallbackMatcher.attach_active_record_callback_hooks! = Matchers == RecordCountChangeMatcher Test if the count for a model has changed, and by how much. Requires the context_with_matcher_before_hooks patch, which is included by default. Provides the following matcher methods: - create_record(klass_or_symbol) Alias for change_record_count.for(klass_or_symbol).by(1) - create_records(klass_or_symbol, amount) Alias for change_record_count.for(klass_or_symbol).by(amount) - destroy_record(klass_or_symbol) Alias for change_record_count.for(klass_or_symbol).by(-1) - destroy_records(klass_or_symbol, amount) Alias for change_record_count.for(klass_or_symbol).by(-amount) - change_record_count Tests the difference in record count before and after the current setup/subject block Can be used with the follow methods: - for(klass_or_symbol) Provides the class which the test is being performed on. Can be a constant or a symbol - by(amount) Provides an expected difference for the number of records for the specified class. Excluding this number will allow the matcher to check for any difference Examples: context "creating a blog article" do context "with good parameters" do setup do post :create, :blog => {:title => 'my blog post', :body => 'Ipsum lorem...'} end should create_record :blog end context "without a body" do setup do post :create, :blog => {:title => 'my blog post' } end should_not create_record Blog end end == RespondWithJson Check if the controller's response is json Examples: context ":index.json" do setup do get :index, :format => 'json' end # Just check to see that the response was json should respond_with_json # Evaluate the hash produced by the json yourself should respond_with_json { |json| json.first['blog']['title'] == 'blog post 1'} # Provide an exact match should respond_with_json.exactly(['blog' => {'id' => 1, 'title' => 'blog post 1'}]) # Provide an exact match with a block should response_with_json.exactly{ |json| JSON.parse(Blog.all.to_json)} end context ":index.html" do setup do get :index end # or the negation should_not respond_with_json end == TriggerCallbackMatcher Test if create, update, destroy, or save callbacks were triggered. Requires running ShouldaExt::Matchers::TriggerCallbackMatcher.attach_active_record_callback_hooks! in your test suite in order to work properly. Examples: context "doing nothing to a record" do subject { Blog.new :title => 'blog title' } should_not trigger_callbacks end context "creating a record" do subject { Blog.create! :title => 'blog title' } should trigger_callbacks.for :create should_not trigger_callbacks.for :update, :destroy end = Integrations Currently only integrates with test/unit. RSpec support to come. = Shoulda Extensions == ContextWithMatcherBeforeHooks Adds the ability to define a 'before' method on any method which will be run before each context's setup/subject block. Used by RecordCountChangeMatcher to record the number of records before the tested operation takes place.

Lookout Lookout is a unit testing framework for Ruby¹ that puts your results in focus. Tests (expectations) are written as follows expect 2 do 1 + 1 end expect ArgumentError do Integer('1 + 1') end expect Array do [1, 2, 3].select{ |i| i % 2 == 0 } end expect [2, 4, 6] do [1, 2, 3].map{ |i| i * 2 } end Lookout is designed to encourage – force, even – unit testing best practices such as • Setting up only one expectation per test • Not setting expectations on non-public APIs • Test isolation This is done by • Only allowing one expectation to be set per test • Providing no (additional) way of accessing private state • Providing no setup and tear-down methods, nor a method of providing test helpers Other important points are • Putting the expected outcome of a test in focus with the steps of the calculation of the actual result only as a secondary concern • A focus on code readability by providing no mechanism for describing an expectation other than the code in the expectation itself • A unified syntax for setting up both state-based and behavior-based expectations The way Lookout works has been heavily influenced by expectations², by {Jay Fields}³. The code base was once also heavily based on expectations, based at Subversion {revision 76}⁴. A lot has happened since then and all of the work past that revision are due to {Nikolai Weibull}⁵. ¹ Ruby: http://ruby-lang.org/ ² Expectations: http://expectations.rubyforge.org/ ³ Jay Fields’s blog: http://blog.jayfields.com/ ⁴ Lookout revision 76: https://github.com/now/lookout/commit/537bedf3e5b3eb4b31c066b3266f42964ac35ebe ⁵ Nikolai Weibull’s home page: http://disu.se/ § Installation Install Lookout with % gem install lookout § Usage Lookout allows you to set expectations on an object’s state or behavior. We’ll begin by looking at state expectations and then take a look at expectations on behavior. § Expectations on State: Literals An expectation can be made on the result of a computation: expect 2 do 1 + 1 end Most objects, in fact, have their state expectations checked by invoking ‹#==› on the expected value with the result as its argument. Checking that a result is within a given range is also simple: expect 0.099..0.101 do 0.4 - 0.3 end Here, the more general ‹#===› is being used on the ‹Range›. § Regexps ‹Strings› of course match against ‹Strings›: expect 'ab' do 'abc'[0..1] end but we can also match a ‹String› against a ‹Regexp›: expect %r{a substring} do 'a string with a substring' end (Note the use of ‹%r{…}› to avoid warnings that will be generated when Ruby parses ‹expect /…/›.) § Modules Checking that the result includes a certain module is done by expecting the ‹Module›. expect Enumerable do [] end This, due to the nature of Ruby, of course also works for classes (as they are also modules): expect String do 'a string' end This doesn’t hinder us from expecting the actual ‹Module› itself: expect Enumerable do Enumerable end or the ‹Class›: expect String do String end for obvious reasons. As you may have figured out yourself, this is accomplished by first trying ‹#==› and, if it returns ‹false›, then trying ‹#===› on the expected ‹Module›. This is also true of ‹Ranges› and ‹Regexps›. § Booleans Truthfulness is expected with ‹true› and ‹false›: expect true do 1 end expect false do nil end Results equaling ‹true› or ‹false› are slightly different: expect TrueClass do true end expect FalseClass do false end The rationale for this is that you should only care if the result of a computation evaluates to a value that Ruby considers to be either true or false, not the exact literals ‹true› or ‹false›. § IO Expecting output on an IO object is also common: expect output("abc\ndef\n") do |io| io.puts 'abc', 'def' end This can be used to capture the output of a formatter that takes an output object as a parameter. § Warnings Expecting warnings from code isn’t very common, but should be done: expect warning('this is your final one!') do warn 'this is your final one!' end expect warning('this is your final one!') do warn '%s:%d: warning: this is your final one!' % [__FILE__, __LINE__] end ‹$VERBOSE› is set to ‹true› during the execution of the block, so you don’t need to do so yourself. If you have other code that depends on the value of $VERBOSE, that can be done with ‹#with_verbose› expect nil do with_verbose nil do $VERBOSE end end § Errors You should always be expecting errors from – and in, but that’s a different story – your code: expect ArgumentError do Integer('1 + 1') end Often, not only the type of the error, but its description, is important to check: expect StandardError.new('message') do raise StandardError.new('message') end As with ‹Strings›, ‹Regexps› can be used to check the error description: expect StandardError.new(/mess/) do raise StandardError.new('message') end § Queries Through Symbols Symbols are generally matched against symbols, but as a special case, symbols ending with ‹?› are seen as expectations on the result of query methods on the result of the block, given that the method is of zero arity and that the result isn’t a Symbol itself. Simply expect a symbol ending with ‹?›: expect :empty? do [] end To expect it’s negation, expect the same symbol beginning with ‹not_›: expect :not_nil? do [1, 2, 3] end This is the same as expect true do [].empty? end and expect false do [1, 2, 3].empty? end but provides much clearer failure messages. It also makes the expectation’s intent a lot clearer. § Queries By Proxy There’s also a way to make the expectations of query methods explicit by invoking methods on the result of the block. For example, to check that the even elements of the Array ‹[1, 2, 3]› include ‹1› you could write expect result.to.include? 1 do [1, 2, 3].reject{ |e| e.even? } end You could likewise check that the result doesn’t include 2: expect result.not.to.include? 2 do [1, 2, 3].reject{ |e| e.even? } end This is the same as (and executes a little bit slower than) writing expect false do [1, 2, 3].reject{ |e| e.even? }.include? 2 end but provides much clearer failure messages. Given that these two last examples would fail, you’d get a message saying “[1, 2, 3]#include?(2)” instead of the terser “true≠false”. It also clearly separates the actual expectation from the set-up. The keyword for this kind of expectations is ‹result›. This may be followed by any of the methods • ‹#not› • ‹#to› • ‹#be› • ‹#have› or any other method you will want to call on the result. The methods ‹#to›, ‹#be›, and ‹#have› do nothing except improve readability. The ‹#not› method inverts the expectation. § Literal Literals If you need to literally check against any of the types of objects otherwise treated specially, that is, any instances of • ‹Module› • ‹Range› • ‹Regexp› • ‹Exception› • ‹Symbol›, given that it ends with ‹?› you can do so by wrapping it in ‹literal(…)›: expect literal(:empty?) do :empty? end You almost never need to do this, as, for all but symbols, instances will match accordingly as well. § Expectations on Behavior We expect our objects to be on their best behavior. Lookout allows you to make sure that they are. Reception expectations let us verify that a method is called in the way that we expect it to be: expect mock.to.receive.to_str(without_arguments){ '123' } do |o| o.to_str end Here, ‹#mock› creates a mock object, an object that doesn’t respond to anything unless you tell it to. We tell it to expect to receive a call to ‹#to_str› without arguments and have ‹#to_str› return ‹'123'› when called. The mock object is then passed in to the block so that the expectations placed upon it can be fulfilled. Sometimes we only want to make sure that a method is called in the way that we expect it to be, but we don’t care if any other methods are called on the object. A stub object, created with ‹#stub›, expects any method and returns a stub object that, again, expects any method, and thus fits the bill. expect stub.to.receive.to_str(without_arguments){ '123' } do |o| o.to_str if o.convertable? end You don’t have to use a mock object to verify that a method is called: expect Object.to.receive.name do Object.name end As you have figured out by now, the expected method call is set up by calling ‹#receive› after ‹#to›. ‹#Receive› is followed by a call to the method to expect with any expected arguments. The body of the expected method can be given as the block to the method. Finally, an expected invocation count may follow the method. Let’s look at this formal specification in more detail. The expected method arguments may be given in a variety of ways. Let’s introduce them by giving some examples: expect mock.to.receive.a do |m| m.a end Here, the method ‹#a› must be called with any number of arguments. It may be called any number of times, but it must be called at least once. If a method must receive exactly one argument, you can use ‹Object›, as the same matching rules apply for arguments as they do for state expectations: expect mock.to.receive.a(Object) do |m| m.a 0 end If a method must receive a specific argument, you can use that argument: expect mock.to.receive.a(1..2) do |m| m.a 1 end Again, the same matching rules apply for arguments as they do for state expectations, so the previous example expects a call to ‹#a› with 1, 2, or the Range 1..2 as an argument on ‹m›. If a method must be invoked without any arguments you can use ‹without_arguments›: expect mock.to.receive.a(without_arguments) do |m| m.a end You can of course use both ‹Object› and actual arguments: expect mock.to.receive.a(Object, 2, Object) do |m| m.a nil, 2, '3' end The body of the expected method may be given as the block. Here, calling ‹#a› on ‹m› will give the result ‹1›: expect mock.to.receive.a{ 1 } do |m| raise 'not 1' unless m.a == 1 end If no body has been given, the result will be a stub object. To take a block, grab a block parameter and ‹#call› it: expect mock.to.receive.a{ |&b| b.call(1) } do |m| j = 0 m.a{ |i| j = i } raise 'not 1' unless j == 1 end To simulate an ‹#each›-like method, ‹#call› the block several times. Invocation count expectations can be set if the default expectation of “at least once” isn’t good enough. The following expectations are possible • ‹#at_most_once› • ‹#once› • ‹#at_least_once› • ‹#twice› And, for a given ‹N›, • ‹#at_most(N)› • ‹#exactly(N)› • ‹#at_least(N)› § Utilities: Stubs Method stubs are another useful thing to have in a unit testing framework. Sometimes you need to override a method that does something a test shouldn’t do, like access and alter bank accounts. We can override – stub out – a method by using the ‹#stub› method. Let’s assume that we have an ‹Account› class that has two methods, ‹#slips› and ‹#total›. ‹#Slips› retrieves the bank slips that keep track of your deposits to the ‹Account› from a database. ‹#Total› sums the ‹#slips›. In the following test we want to make sure that ‹#total› does what it should do without accessing the database. We therefore stub out ‹#slips› and make it return something that we can easily control. expect 6 do |m| stub(Class.new{ def slips raise 'database not available' end def total slips.reduce(0){ |m, n| m.to_i + n.to_i } end }.new, :slips => [1, 2, 3]){ |account| account.total } end To make it easy to create objects with a set of stubbed methods there’s also a convenience method: expect 3 do s = stub(:a => 1, :b => 2) s.a + s.b end This short-hand notation can also be used for the expected value: expect stub(:a => 1, :b => 2).to.receive.a do |o| o.a + o.b end and also works for mock objects: expect mock(:a => 2, :b => 2).to.receive.a do |o| o.a + o.b end Blocks are also allowed when defining stub methods: expect 3 do s = stub(:a => proc{ |a, b| a + b }) s.a(1, 2) end If need be, we can stub out a specific method on an object: expect 'def' do stub('abc', :to_str => 'def'){ |a| a.to_str } end The stub is active during the execution of the block. § Overriding Constants Sometimes you need to override the value of a constant during the execution of some code. Use ‹#with_const› to do just that: expect 'hello' do with_const 'A::B::C', 'hello' do A::B::C end end Here, the constant ‹A::B::C› is set to ‹'hello'› during the execution of the block. None of the constants ‹A›, ‹B›, and ‹C› need to exist for this to work. If a constant doesn’t exist it’s created and set to a new, empty, ‹Module›. The value of ‹A::B::C›, if any, is restored after the block returns and any constants that didn’t previously exist are removed. § Overriding Environment Variables Another thing you often need to control in your tests is the value of environment variables. Depending on such global values is, of course, not a good practice, but is often unavoidable when working with external libraries. ‹#With_env› allows you to override the value of environment variables during the execution of a block by giving it a ‹Hash› of key/value pairs where the key is the name of the environment variable and the value is the value that it should have during the execution of that block: expect 'hello' do with_env 'INTRO' => 'hello' do ENV['INTRO'] end end Any overridden values are restored and any keys that weren’t previously a part of the environment are removed when the block returns. § Overriding Globals You may also want to override the value of a global temporarily: expect 'hello' do with_global :$stdout, StringIO.new do print 'hello' $stdout.string end end You thus provide the name of the global and a value that it should take during the execution of a block of code. The block gets passed the overridden value, should you need it: expect true do with_global :$stdout, StringIO.new do |overridden| $stdout != overridden end end § Integration Lookout can be used from Rake¹. Simply install Lookout-Rake²: % gem install lookout-rake and add the following code to your Rakefile require 'lookout-rake-3.0' Lookout::Rake::Tasks::Test.new Make sure to read up on using Lookout-Rake for further benefits and customization. ¹ Read more about Rake at http://rake.rubyforge.org/ ² Get information on Lookout-Rake at http://disu.se/software/lookout-rake/ § API Lookout comes with an API¹ that let’s you create things such as new expected values, difference reports for your types, and so on. ¹ See http://disu.se/software/lookout/api/ § Interface Design The default output of Lookout can Spartanly be described as Spartan. If no errors or failures occur, no output is generated. This is unconventional, as unit testing frameworks tend to dump a lot of information on the user, concerning things such as progress, test count summaries, and flamboyantly colored text telling you that your tests passed. None of this output is needed. Your tests should run fast enough to not require progress reports. The lack of output provides you with the same amount of information as reporting success. Test count summaries are only useful if you’re worried that your tests aren’t being run, but if you worry about that, then providing such output doesn’t really help. Testing your tests requires something beyond reporting some arbitrary count that you would have to verify by hand anyway. When errors or failures do occur, however, the relevant information is output in a format that can easily be parsed by an ‹'errorformat'› for Vim or with {Compilation Mode}¹ for Emacs². Diffs are generated for Strings, Arrays, Hashes, and I/O. ¹ Read up on Compilation mode for Emacs at http://www.emacswiki.org/emacs/CompilationMode ² Visit The GNU Foundation’s Emacs’ software page at http://www.gnu.org/software/emacs/ § External Design Let’s now look at some of the points made in the introduction in greater detail. Lookout only allows you to set one expectation per test. If you’re testing behavior with a reception expectation, then only one method-invocation expectation can be set. If you’re testing state, then only one result can be verified. It may seem like this would cause unnecessary duplication between tests. While this is certainly a possibility, when you actually begin to try to avoid such duplication you find that you often do so by improving your interfaces. This kind of restriction tends to encourage the use of value objects, which are easy to test, and more focused objects, which require simpler tests, as they have less behavior to test, per method. By keeping your interfaces focused you’re also keeping your tests focused. Keeping your tests focused improves, in itself, test isolation, but let’s look at something that hinders it: setup and tear-down methods. Most unit testing frameworks encourage test fragmentation by providing setup and tear-down methods. Setup methods create objects and, perhaps, just their behavior for a set of tests. This means that you have to look in two places to figure out what’s being done in a test. This may work fine for few methods with simple set-ups, but makes things complicated when the number of tests increases and the set-up is complex. Often, each test further adjusts the previously set-up object before performing any verifications, further complicating the process of figuring out what state an object has in a given test. Tear-down methods clean up after tests, perhaps by removing records from a database or deleting files from the file-system. The duplication that setup methods and tear-down methods hope to remove is better avoided by improving your interfaces. This can be done by providing better set-up methods for your objects and using idioms such as {Resource Acquisition Is Initialization}¹ for guaranteed clean-up, test or no test. By not using setup and tear-down methods we keep everything pertinent to a test in the test itself, thus improving test isolation. (You also won’t {slow down your tests}² by keeping unnecessary state.) Most unit test frameworks also allow you to create arbitrary test helper methods. Lookout doesn’t. The same rationale as that that has been crystallized in the preceding paragraphs applies. If you need helpers you’re interface isn’t good enough. It really is as simple as that. To clarify: there’s nothing inherently wrong with test helper methods, but they should be general enough that they reside in their own library. The support for mocks in Lookout is provided through a set of test helper methods that make it easier to create mocks than it would have been without them. Lookout-rack³ is another example of a library providing test helper methods (well, one method, actually) that are very useful in testing web applications that use Rack⁴. A final point at which some unit test frameworks try to fragment tests further is documentation. These frameworks provide ways of describing the whats and hows of what’s being tested, the rationale being that this will provide documentation of both the test and the code being tested. Describing how a stack data structure is meant to work is a common example. A stack is, however, a rather simple data structure, so such a description provides little, if any, additional information that can’t be extracted from the implementation and its tests themselves. The implementation and its tests is, in fact, its own best documentation. Taking the points made in the previous paragraphs into account, we should already have simple, self-describing, interfaces that have easily understood tests associated with them. Rationales for the use of a given data structure or system-design design documentation is better suited in separate documentation focused at describing exactly those issues. ¹ Read the Wikipedia entry for Resource Acquisition Is Initialization at http://en.wikipedia.org/wiki/Resource_Acquisition_Is_Initialization ² Read how 37signals had problems with slow Test::Unit tests at http://37signals.com/svn/posts/2742-the-road-to-faster-tests/ ³ Visit the Lookout-rack home page at http://disu.se/software/lookout-rack/ ⁴ Visit the Rack Rubyforge project page at http://rack.rubyforge.org/ § Internal Design The internal design of Lookout has had a couple of goals. • As few external dependencies as possible • As few internal dependencies as possible • Internal extensibility provides external extensibility • As fast load times as possible • As high a ratio of value objects to mutable objects as possible • Each object must have a simple, obvious name • Use mix-ins, not inheritance for shared behavior • As few responsibilities per object as possible • Optimizing for speed can only be done when you have all the facts § External Dependencies Lookout used to depend on Mocha for mocks and stubs. While benchmarking I noticed that a method in Mocha was taking up more than 300 percent of the runtime. It turned out that Mocha’s method for cleaning up back-traces generated when a mock failed was doing something incredibly stupid: backtrace.reject{ |l| Regexp.new(@lib).match(File.expand_path(l)) } Here ‹@lib› is a ‹String› containing the path to the lib sub-directory in the Mocha installation directory. I reported it, provided a patch five days later, then waited. Nothing happened. {254 days later}¹, according to {Wolfram Alpha}², half of my patch was, apparently – I say “apparently”, as I received no notification – applied. By that time I had replaced the whole mocking-and-stubbing subsystem and dropped the dependency. Many Ruby developers claim that Ruby and its gems are too fast-moving for normal package-managing systems to keep up. This is testament to the fact that this isn’t the case and that the real problem is instead related to sloppy practices. Please note that I don’t want to single out the Mocha library nor its developers. I only want to provide an example where relying on external dependencies can be “considered harmful”. ¹ See the Wolfram Alpha calculation at http://www.wolframalpha.com/input/?i=days+between+march+17%2C+2010+and+november+26%2C+2010 ² Check out the Wolfram Alpha computational knowledge engine at http://www.wolframalpha.com/ § Internal Dependencies Lookout has been designed so as to keep each subsystem independent of any other. The diff subsystem is, for example, completely decoupled from any other part of the system as a whole and could be moved into its own library at a time where that would be of interest to anyone. What’s perhaps more interesting is that the diff subsystem is itself very modular. The data passes through a set of filters that depends on what kind of diff has been requested, each filter yielding modified data as it receives it. If you want to read some rather functional Ruby I can highly recommend looking at the code in the ‹lib/lookout/diff› directory. This lookout on the design of the library also makes it easy to extend Lookout. Lookout-rack was, for example, written in about four hours and about 5 of those 240 minutes were spent on setting up the interface between the two. § Optimizing For Speed The following paragraph is perhaps a bit personal, but might be interesting nonetheless. I’ve always worried about speed. The original Expectations library used ‹extend› a lot to add new behavior to objects. Expectations, for example, used to hold the result of their execution (what we now term “evaluation”) by being extended by a module representing success, failure, or error. For the longest time I used this same method, worrying about the increased performance cost that creating new objects for results would incur. I finally came to a point where I felt that the code was so simple and clean that rewriting this part of the code for a benchmark wouldn’t take more than perhaps ten minutes. Well, ten minutes later I had my results and they confirmed that creating new objects wasn’t harming performance. I was very pleased. § Naming I hate low lines (underscores). I try to avoid them in method names and I always avoid them in file names. Since the current “best practice” in the Ruby community is to put ‹BeginEndStorage› in a file called ‹begin_end_storage.rb›, I only name constants using a single noun. This has had the added benefit that classes seem to have acquired less behavior, as using a single noun doesn’t allow you to tack on additional behavior without questioning if it’s really appropriate to do so, given the rather limited range of interpretation for that noun. It also seems to encourage the creation of value objects, as something named ‹Range› feels a lot more like a value than ‹BeginEndStorage›. (To reach object-oriented-programming Nirvana you must achieve complete value.) § News § 3.0.0 The ‹xml› expectation has been dropped. It wasn’t documented, didn’t suit very many use cases, and can be better implemented by an external library. The ‹arg› argument matcher for mock method arguments has been removed, as it didn’t provide any benefit over using Object. The ‹#yield› and ‹#each› methods on stub and mock methods have been removed. They were slightly weird and their use case can be implemented using block parameters instead. The ‹stub› method inside ‹expect› blocks now stubs out the methods during the execution of a provided block instead of during the execution of the whole except block. When a mock method is called too many times, this is reported immediately, with a full backtrace. This makes it easier to pin down what’s wrong with the code. Query expectations were added. Explicit query expectations were added. Fluent boolean expectations, for example, ‹expect nil.to.be.nil?› have been replaced by query expectations (‹expect :nil? do nil end›) and explicit query expectations (‹expect result.to.be.nil? do nil end›). This was done to discourage creating objects as the expected value and creating objects that change during the course of the test. The ‹literal› expectation was added. Equality (‹#==›) is now checked before “caseity” (‹#===›) for modules, ranges, and regular expressions to match the documentation. § Financing Currently, most of my time is spent at my day job and in my rather busy private life. Please motivate me to spend time on this piece of software by donating some of your money to this project. Yeah, I realize that requesting money to develop software is a bit, well, capitalistic of me. But please realize that I live in a capitalistic society and I need money to have other people give me the things that I need to continue living under the rules of said society. So, if you feel that this piece of software has helped you out enough to warrant a reward, please PayPal a donation to now@disu.se¹. Thanks! Your support won’t go unnoticed! ¹ Send a donation: https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=now%40disu%2ese&item_name=Lookout § Reporting Bugs Please report any bugs that you encounter to the {issue tracker}¹. ¹ See https://github.com/now/lookout/issues § Contributors Contributors to the original expectations codebase are mentioned there. We hope no one on that list feels left out of this list. Please {let us know}¹ if you do. • Nikolai Weibull ¹ Add an issue to the Lookout issue tracker at https://github.com/now/lookout/issues § Licensing Lookout is free software: you may redistribute it and/or modify it under the terms of the {GNU Lesser General Public License, version 3}¹ or later², as published by the {Free Software Foundation}³. ¹ See http://disu.se/licenses/lgpl-3.0/ ² See http://gnu.org/licenses/ ³ See http://fsf.org/

= Webservice Client Library for InterMine Data-Warehouses This library provides an interface to the InterMine webservices API. It makes construction and execution of queries more straightforward, safe and convenient, and allows for results to be used directly in Ruby code. As well as traditional row based access, the library provides an object-orientated record result format (similar to ActiveRecords), and allows for fast, memory efficient iteration of result sets. == Example Get all protein domains associated with a set of genes and print their names: require "intermine/service" Service.new("www.flymine.org/query"). new_query("Pathway") select(:name). where("genes.symbol" =&gt; ["zen", "hox", "h", "bib"]). each_row { |row| puts row[:name]} == Who is this for? InterMine data warehouses are typically constructed to hold Biological data, and as this library facilitates programmatic access to these data, this install is primarily aimed at bioinformaticians. In particular, users of the following services may find it especially useful: * FlyMine (http://www.flymine.org/query) * YeastMine (http://yeastmine.yeastgenome.org/yeastmine) * RatMine (http://ratmine.mcw.edu/ratmine) * modMine (http://intermine.modencode.org/release-23) * metabolicMine (http://www.metabolicmine.org/beta) == How to use this library: We have tried to construct an interface to this library that does not require you to learn an entirely new set of concepts. As such, as well as the underlying methods that are common to all libraries, there is an additional set of aliases and sugar methods that emulate the DSL style of SQL: === SQL style service = Service.new("www.flymine.org/query") service.model. table("Gene"). select("*", "pathways.*"). where(:symbol =&gt; "zen"). order_by(:symbol). outerjoin(:pathways). each_row do |r| puts r end === Common InterMine interface service = Service.new("www.flymine.org/query") query = service.new_query("Gene") query.add_views("*", "pathways.*") query.add_constraint("symbol", "=", "zen") query.add_sort_order(:symbol) query.add_join(:pathways) query.each_row do |r| puts r end For more details, see the accompanying documentation and the unit tests for interface examples. Further documentation is available at www.intermine.org. == Support Support is available on our development mailing list: dev@intermine.org == License This code is Open Source under the LGPL. Source code for this gem can be checked out from https://github.com/intermine/intermine-ws-ruby

== Confidently Build Terminal Apps Rooibos[https://rooibos.run] helps you build interactive terminal applications. Keep your code understandable and testable as it scales. Rooibos handles keyboard, mouse, and async work so you can focus on behavior and user experience. gem install rooibos <i>Currently in beta. APIs may change before 1.0.</i> === Get Started in Seconds rooibos new my_app cd my_app rooibos run That's it. You have a working app with keyboard navigation, mouse support, and clickable buttons. Open <tt>lib/my_app.rb</tt> to make it your own. --- === The Pattern \Rooibos uses Model-View-Update, the architecture behind Elm[https://guide.elm-lang.org/architecture/], Redux[https://redux.js.org/], and {Bubble Tea}[https://github.com/charmbracelet/bubbletea]. State lives in one place. Updates flow in one direction. The runtime handles rendering and runs background work for you. --- === Hello, MVU The simplest \Rooibos app. Press any key to increment the counter. Press <tt>Ctrl</tt>+<tt>C</tt> to quit. require "rooibos" module Counter # Init: How do you create the initial model? Init = -> { 0 } # View: What does the user see? View = -> (model, tui) { tui.paragraph(text: <<~END) } Current count: #{model}. Press any key to increment. Press Ctrl+C to quit. END # Update: What happens when things change? Update = -> (message, model) { if message.ctrl_c? Rooibos::Command.exit elsif message.key? model + 1 end } end Rooibos.run(Counter) That's the whole pattern: Model holds state, Init creates it, View renders it, and Update changes it. The runtime handles everything else. --- === Your First Real Application A file browser in sixty lines. It opens files, navigates directories, handles errors, styles directories and hidden files differently, and supports vim-style keyboard shortcuts. If you can do this much with this little code, imagine how easy _your_ app will be to build. require "rooibos" module FileBrowser # Model: What state does your app need? Model = Data.define(:path, :entries, :selected, :error) Init = -> { path = Dir.pwd entries = Entries[path] Ractor.make_shareable( # Ensures thread safety Model.new(path:, entries:, selected: entries.first, error: nil)) } View = -> (model, tui) { tui.block( titles: [model.error || model.path, { content: KEYS, position: :bottom, alignment: :right}], borders: [:all], border_style: if model.error then tui.style(fg: :red) else nil end, children: [tui.list(items: model.entries.map(&ListItem[model, tui]), selected_index: model.entries.index(model.selected), highlight_symbol: "", highlight_style: tui.style(modifiers: [:reversed]))] ) } Update = -> (message, model) { return model.with(error: ERROR) if message.error? model = model.with(error: nil) if model.error && message.key? if message.ctrl_c? || message.q? then Rooibos::Command.exit elsif message.home? || message.g? then model.with(selected: model.entries.first) elsif message.end? || message.G? then model.with(selected: model.entries.last) elsif message.up_arrow? || message.k? then Select[:-, model] elsif message.down_arrow? || message.j? then Select[:+, model] elsif message.enter? then Open[model] elsif message.escape? then Navigate[File.dirname(model.path), model] end } private # Lines below this are implementation details KEYS = "↑/↓/Home/End: Select | Enter: Open | Esc: Navigate Up | q: Quit" ERROR = "Sorry, opening the selected file failed." ListItem = -> (model, tui) { -> (name) { modifiers = name.start_with?(".") ? [:dim] : [] fg = :blue if name.end_with?("/") tui.list_item(content: name, style: tui.style(fg:, modifiers:)) } } Select = -> (operator, model) { new_index = model.entries.index(model.selected).public_send(operator, 1) model.with(selected: model.entries[new_index.clamp(0, model.entries.length - 1)]) } Open = -> (model) { full = File.join(model.path, model.selected.delete_suffix("/")) model.selected.end_with?("/") ? Navigate[full, model] : Rooibos::Command.open(full) } Navigate = -> (path, model) { entries = Entries[path] model.with(path:, entries:, selected: entries.first, error: nil) } Entries = -> (path) { Dir.children(path).map { |name| File.directory?(File.join(path, name)) ? "#{name}/" : name }.sort_by { |name| [name.end_with?("/") ? 0 : 1, name.downcase] } } end Rooibos.run(FileBrowser) --- === Batteries Included ==== Commands Applications fetch data, run shell commands, and set timers. \Rooibos Commands run off the main thread and send results back as messages. <b>HTTP requests:</b> Update = -> (message, model) { case message in :fetch_users [model.with(loading: true), Rooibos::Command.http(:get, "/api/users", :got_users)] in { type: :http, envelope: :got_users, status: 200, body: } model.with(loading: false, users: JSON.parse(body)) in { type: :http, envelope: :got_users, status: } model.with(error: "HTTP #{status}") end } <b>Shell commands:</b> Update = -> (message, model) { case message in :list_files Rooibos::Command.system("ls -la", :listed_files) in { type: :system, envelope: :listed_files, stdout:, status: 0 } model.with(files: stdout.lines.map(&:chomp)) in { type: :system, envelope: :listed_files, stderr:, status: } model.with(error: stderr) end } <b>Timers:</b> Update = -> (message, model) { case message in { type: :timer, envelope: :tick, elapsed: } [model.with(frame: model.frame + 1), Rooibos::Command.wait(1.0 / 24, :tick)] end } <b>And more!</b> \Rooibos includes <tt>all</tt>, <tt>batch</tt>, <tt>bubble</tt>, <tt>cancel</tt>, <tt>custom</tt>, <tt>deliver</tt>, <tt>exit</tt>, <tt>http</tt>, <tt>map</tt>, <tt>open</tt>, <tt>system</tt>, <tt>tick</tt>, and <tt>wait</tt> commands. You can also define your own custom commands for complex orchestration. Every command produces a message, and Update handles it the same way. ==== Testing \Rooibos makes TUIs so easy to test, you'll save more time by writing tests than by not testing. <b>Unit test Update, View, and Init.</b> No terminal needed. Test helpers included. def test_moves_selection_down_with_j model = Ractor.make_shareable(FileBrowser::Model.new( path: "/", entries: %w[bin exe lib], selected: "bin", error: nil)) message = RatatuiRuby::Event::Key.new(code: "j") result = FileBrowser::Update.call(message, model) assert_equal "exe", result.selected end <b>Style assertions.</b> Draw to a headless terminal, verify colors and modifiers. def test_directories_are_blue with_test_terminal(60, 10) do model = Ractor.make_shareable(FileBrowser::Model.new( path: "/", entries: %w[file.txt subdir/], selected: "file.txt", error: nil)) widget = FileBrowser::View.call(model, RatatuiRuby::TUI.new) RatatuiRuby.draw { |frame| frame.render_widget(widget, frame.area) } assert_blue(1, 2) # "subdir/" at column 1, row 2 end end <b>System tests.</b> Inject events, run the full app, snapshot the result. def test_selection_moves_down with_test_terminal(120, 30) do Dir.mktmpdir do |dir| FileUtils.touch(File.join(dir, "a")) FileUtils.touch(File.join(dir, "b")) FileUtils.touch(File.join(dir, "c")) inject_key(:down) inject_key(:ctrl_c) # Tests use explicit params to inject deterministic initial state. Rooibos.run( model: Ractor.make_shareable(FileBrowser::Model.new( path: dir, entries: %w[a b c], selected: "a", error: nil)), view: FileBrowser::View, update: FileBrowser::Update ) assert_snapshots("selection_moved_down") do |lines| title = "┌/tmp/test#{'─' * 107}┐" lines.map do |l| l.gsub(/┌#{Regexp.escape(dir)}[^┐]*┐/, title) end end end end end Snapshots record both plain text and ANSI colors. Normalization blocks mask dynamic content (timestamps, temp paths) for cross-platform reproducibility. Run <tt>UPDATE_SNAPSHOTS=1 rake test</tt> to regenerate baselines. ==== Scale Up Large applications decompose into fragments. Each fragment has its own Model, View, Update, and Init. Parents compose children. The pattern scales. The Router DSL eliminates boilerplate: module Dashboard include Rooibos::Router route :stats, to: StatsPanel route :network, to: NetworkPanel receive_events :ctrl_c, -> { Rooibos::Command.exit } only when: -> (_message, model) { !model.modal_open } do receive_events :q, -> { Rooibos::Command.exit } forward_events :s, to: :stats, as: :fetch forward_events :p, to: :network, as: :ping end Update = from_router # ... Model, Init, View below end Declare routes and event handlers. The router generates Update for you. Use guards to ignore messages when needed. ==== CLI The <tt>rooibos</tt> command scaffolds projects and runs applications. rooibos new my_app # Generate project structure rooibos run # Run the app in current directory Generated apps include tests, type signatures, and a working welcome screen with keyboard and mouse support. --- === The Ecosystem \Rooibos builds on RatatuiRuby[https://www.ratatui-ruby.dev], a Rubygem built on Ratatui[https://ratatui.rs]. You get native performance with the joy of Ruby. \Rooibos is one way to manage state and composition. Kit is another. ==== Rooibos[https://www.rooibos.run] Model-View-Update architecture. Inspired by Elm, Bubble Tea, and React + Redux. Your UI is a pure function of state. - Functional programming with MVU - Commands work off the main thread - Messages, not callbacks, drive updates ==== {Kit}[https://sr.ht/~kerrick/ratatui_ruby/#chapter-3-the-object-path--kit] (Coming Soon) Component-based architecture. Encapsulate state, input handling, and rendering in reusable pieces. - OOP with stateful components - Separate UI state from domain logic - Built-in focus management & click handling Both use the same widget library and rendering engine. Pick the paradigm that fits your brain. --- === Links [Get Started] {Getting Started}[https://www.rooibos.run/docs/trunk/doc/getting_started/index_md.html], {Tutorial}[https://www.rooibos.run/docs/trunk/doc/tutorial/index_md.html], {Examples}[https://www.rooibos.run/docs/trunk/examples/app_fractal_dashboard/README_md.html] [Coming From...] {React/Redux}[https://www.rooibos.run/docs/trunk/doc/getting_started/for_react_developers_md.html], {BubbleTea}[https://www.rooibos.run/docs/trunk/doc/getting_started/for_go_developers_md.html], {Textual}[https://www.rooibos.run/docs/trunk/doc/getting_started/for_python_developers_md.html] [Learn More] {Essentials}[https://www.rooibos.run/docs/trunk/doc/essentials/index_md.html], {Scaling Up}[https://www.rooibos.run/docs/trunk/doc/scaling_up/index_md.html], {Best Practices}[https://www.rooibos.run/docs/trunk/doc/best_practices/index_md.html], {Troubleshooting}[https://www.rooibos.run/docs/trunk/doc/troubleshooting/index_md.html] [Community] {Forum}[https://forum.setdef.com/c/rooibos], {Announcements}[https://forum.setdef.com/tags/c/rooibos/announcement], {Bug Tracker}[https://forum.setdef.com/tags/c/rooibos/bug], {Contribution Guide}[https://github.com/setdef/Rooibos/blob/trunk/CONTRIBUTING.md], {Code of Conduct}[https://github.com/setdef/Rooibos/blob/trunk/CODE_OF_CONDUCT.md] --- [Website] https://rooibos.run [Source] https://github.com/setdef/Rooibos [RubyGems] https://rubygems.org/gems/rooibos © 2026 Kerrick Long · Library: LGPL-3.0-or-later · Website: CC-BY-NC-ND-4.0 · Snippets: MIT-0

No description provided.

No description provided.