Results for go-types

The type checker of the Goscript project.

Cargo extension to list size of all types in a crate

ego's base type system

Ergo blockchain types

Types definitions for Lago API

Nargo common types and error handling

Opens project in RubyMine, starts guard, starts Rails server.

Walk the stack in Pry, with STYLE.

Jump is a tool that allows you to quickly change directories in the bash and zsh shells using bookmarks. Thanks to Jump, you won't have to type those long paths anymore. Jump was inspired by go-tool by ActiveState (http://code.google.com/p/go-tool/).

Captures TDS (Sybase / MSSQL) packages directly from a network interface. Currently, only TDS_LANGUAGE (Query Statements) and their TDS_PARAMFMT/2 TDS_PARAMS are parsed. There are still many data types missing. Also replaces parameters from prepared statements (e.g. @sql9_object_id is going to be replaced by the corresponding value from TDS_PARAMS). Usage: sudo syspy interface destination_ip destination_port Example: sudo syspy eth0 192.168.1.6 2048

Augments ruby-lsp hover and go-to-definition with type information from sorbet/rbi/**/*.rbi. Drop it in your Gemfile and it just works.

YARD-Heuristics YARD-Heuristics heuristically determines types of parameters and return values for YARD documentation that doesn’t explicitly document it. This allows you to write documentation that isn’t adorned with “obvious” types, but still get that information into the output. It also lets you nice-looking references to parameters and have them be marked up appropriately in HTML output. § Heuristics The following sections list the various heuristics that YARD-Heuristics apply for determining types of parameters and return values. Note that for all heuristics, a type will only be added if none already exists. § Parameter Named “other” A parameter named “other” has the same type as the receiver. This turns class Point def ==(other) into class Point # @param [Point] other def ==(other) § Parameter Types Derived by Parameter Name Parameters to a method with names in the following table has the type listed on the same row. | Name | Type | |--------+-----------| | index | [Integer] | | object | [Object] | | range | [Range] | | string | [String] | Thus class Point def x_inside?(range) becomes class Point # @param [Range] range def x_inside?(range) § Block Parameters If the last parameter to a method’s name begins with ‘&’ it has the type [Proc]. class Method def initialize(&block) becomes class Method # @param [Block] block def initialize(&block) § Return Types by Method Name For the return type of a method with less than two ‹@return› tags, the method name is lookup up in the following table and has the type listed on the same row. For the “type” “self or type”, if a ‹@param› tag exists with the name “other”, the type of the receiver is used, otherwise “self” is used. For the “type” “type”, the type of the receiver is used. | Name | Type | |-----------------+----------------| | ‹<<› | self or type | | ‹>>› | self or type | | ‹==› | [Boolean] | | ‹===› | [Boolean] | | ‹=~› | [Boolean] | | ‹<=>› | [Integer, nil] | | ‹+› | type | | ‹-› | type | | ‹*› | type | | ‹/› | type | | each | [self] | | each_with_index | [self] | | hash | [Integer] | | inspect | [String] | | length | [Integer] | | size | [Integer] | | to_s | [String] | | to_str | [String] | Thus class Point def <<(other) becomes class Point # @return [Point] def <<(other) but class List def <<(item) becomes class List # @return [self] def <<(item) § Emphasizing Parameter Names When producing HTML output, any words in all uppercase, with a possible “th” suffix, that is also the name of a parameter, an ‹@option›, or a ‹@yieldparam›, will be downcased and emphasized with a class of “parameter”. In the following example, “OTHER” will be turned into ‹<em class="parameter">other</em>›: class Point # @return True if the receiver’s class and {#x} and {#y} `#==` those of # OTHER def ==(other) § Usage Add ‹--plugin yard-heuristics-1.0› to your YARD command line. If you’re using Inventory-Rake-Tasks-YARD¹, add the following to your Rakefile: Inventory::Rake::Tasks::YARD.new do |t| t.options += %w'--plugin yard-heuristics-1.0' end ¹ See http://disu.se/software/inventory-rake-tasks-yard/ § API There’s really not very much to the YARD-Heuristics API. What you can do is add (or modify) the types of parameters and return types of methods by adding (or modifying) entries in the Hash tables ‹YARDHeuristics::ParamTypes› and ‹YARDHeuristics::ReturnTypes› respectively. That’s about it. § Financing Currently, most of my time is spent at my day job and in my rather busy private life. Please motivate me to spend time on this piece of software by donating some of your money to this project. Yeah, I realize that requesting money to develop software is a bit, well, capitalistic of me. But please realize that I live in a capitalistic society and I need money to have other people give me the things that I need to continue living under the rules of said society. So, if you feel that this piece of software has helped you out enough to warrant a reward, please PayPal a donation to now@disu.se¹. Thanks! Your support won’t go unnoticed! ¹ Send a donation: https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=now@disu.se&item_name=YARD-Heuristics § Reporting Bugs Please report any bugs that you encounter to the {issue tracker}¹. ¹ See https://github.com/now/yard-heuristics/issues § Authors Nikolai Weibull wrote the code, the tests, and this README. § Licensing YARD-Heuristics is free software: you may redistribute it and/or modify it under the terms of the {GNU Lesser General Public License, version 3}¹ or later², as published by the {Free Software Foundation}³. ¹ See http://disu.se/licenses/lgpl-3.0/ ² See http://gnu.org/licenses/ ³ See http://fsf.org/

go (to project) do (stuffs) godo provides a smart way of opening a project folder in multiple terminal tabs and, in each tab, invoking a commands appropriate to that project. For example if the folder contains a Rails project the actions might include: starting mongrel, tailing one or more logs, starting consoles or IRB sessions, tailing production logs, opening an editor, running autospec, or gitk. godo works by searching your project paths for a given search string and trying to match it against paths found in one or more configured project roots. It will make some straightforward efforts to disambiguate among multiple matches to find the one you want. godo then uses configurable heuristics to figure out what type of project it is, for example &quot;a RoR project using RSpec and Subversion&quot;. From that it will invokes a series of action appropriate to the type of project detected with each action being run, from the project folder, in its own terminal session. godo is entirely configured by a YAML file (~/.godo) that contains project types, heuristics, actions, project paths, and a session controller. A sample configuration file is provided that can be installed using godo --install. godo comes with an iTerm session controller for MacOSX that uses the rb-appscript gem to control iTerm (see lib/session.rb and lib/sessions/iterm_session.rb). It should be relatively straightforward to add new controller (e.g. for Leopard Terminal.app), or a controller that works in a different way (e.g. by creating new windows instead of new tabs). There is nothing MacOSX specific about the rest of godo so creating controllers for other unixen should be straightforward if they can be controlled from ruby. godo is a rewrite of my original 'gp' script (http://matt.blogs.it/entries/00002674.html) which fixes a number of the deficiencies of that script, turns it into a gem, has a better name, and steals the idea of using heuristics to detect project types from Solomon White's gp variant (http://onrails.org/articles/2007/11/28/scripting-the-leopard-terminal). godo now includes contributions from Lee Marlow &lt;lee.marlow@gmail.com&gt; including support for project level .godo files to override the global configuration, support for Terminal.app, and maximum depth support to speed up the finder. godo lives at the excellent GitHub: http://github.com/mmower/godo/ and accepts patches and forks.

== PintosCheck -- Auto Pintos Checker to Save the Day == == Functionalities == The functionality of this simple script is to download pintos homework assignments from the mail inbox and then run through all the desired tests and finally generate reports in plain text or html formats, all automatically. == Requirements For Running PintosCheck == Since all the scripts are written in ruby, PintosCheck require ruby installed on the system. I use ruby 1.8.7 for development, but ruby 1.9.* versions are expected to function as well. However, ruby 1.8.6 and lower versions are not supported. For information of downloading and installing ruby, see http://www.ruby-lang.org/en/downloads/. In addition to ruby itself, RubyGems 1.3.* is also required because it hosts the installation source for this project and almost all other ruby projects as well. To download or update RubyGems, please go to http://gemcutter.org/pages/download for more information. == Installation == Once you have all the requirements on your system, it's really easy to install PintosCheck. In the UNIX shell or Windows command line environment, type the following command(sudo if needed): gem install pintoscheck --include-dependencies Go grab a cup of coffee, and PintosCheck will automatically download and install itself onto the system. To check the installation, type 'ptschk --version', and if something like 'PintosCheck 0.1.0' pops up then you're green to go! == Finally, how do I check my students' pintos homework? == This project ships with a 'ptschk' command tool. This tool needs a task configuration file to actually do everything. The configuration file is in YAML format, which is basically a recursive key-value pair representation. If you're using PintosCheck for the first time, there's a very nice command line option to generate the skeleton for you. Just run 'ptschk init my_first_task.config' and a file named 'my_first_task.config' will be generated for you. Inside this file there is a set of the minimal options for the task to run properly, and you just have to fill in what you need. After you set up your configuration file, run 'ptschk run my_first_task.config' and the tasks will kick off immediately, and after a while the report will be generated. A detailed configuration options for advanced task setup will be available in production release of this project.

# Wuffl <strong> 1. Introduction </strong> Wuffl is a simple image viewer which can move pictures either to a „Selected“ folder or to a „Deleted“ folder. "Selected" and "Deleted" folders are located in the same folder as the chosen picture. Wuffl is available for Linux Ubuntu >=14.04, Mac >= OS Ventura and Windows >=10. Imagine you review you vacation photographs and you need to select which pictures to show to your friends at the next party, or you work your way through a bunch of old pictures and you need to select a view of them for a anniversary celebration. Wuffl allows you to move the picture to an extra folder ("Selected") or to a "Deleted" folder while viewing it. <strong> 2. Installation </strong> To use the Wuffl image viewer you require: <ul> <li> <a href="https://www.ruby-lang.org/en/downloads/"><code>ruby</code></a> (v2.4) </ul> as well as the following Ruby gems: <ul> <li><code>fastimage</code> <li><code>fileutils</code> <li><code>gtk3</code> <li><code>stringio</code></li> </ul> Get the Wullf image viewer by typing ```gem install wuffl``` in your command line. This will install the wuffl gem as well as the gems mentined above. <strong>3. Usage</strong> Using your terminal or cmd start Wuffl by typing <code> wuffl</code> After starting Wuffl you'll see a start screen with a line of buttons at the bottom. To select an image go to the top left corner, klick on <code>File</code> → <code>Open file</code> and browse to the location of you images. Then select an image and click <code>open</code> or just doubleclick on the selected image. <strong>4. Remarks</strong> If you have any remarks, bugs, questions etc. please tell me, I'd be happy to help.

Ame Ame provides a simple command-line interface API for Ruby¹. It can be used to provide both simple interfaces like that of ‹rm›² and complex ones like that of ‹git›³. It uses Ruby’s own classes, methods, and argument lists to provide an interface that is both simple to use from the command-line side and from the Ruby side. The provided command-line interface is flexible and follows commond standards for command-line processing. ¹ See http://ruby-lang.org/ ² See http://pubs.opengroup.org/onlinepubs/9699919799/utilities/rm.html ³ See http://git-scm.com/docs/ § Usage Let’s begin by looking at two examples, one where we mimic the POSIX¹ command-line interface to the ‹rm› command. Looking at the entry² in the standard, ‹rm› takes the following options: = -f. = Do not prompt for confirmation. = -i. = Prompt for confirmation. = -R. = Remove file hierarchies. = -r. = Equivalent to /-r/. It also takes the following arguments: = FILE. = A pathname or directory entry to be removed. And actually allows one or more of these /FILE/ arguments to be given. We also note that the ‹rm› command is described as a command to “remove directory entries”. ¹ See http://pubs.opengroup.org/onlinepubs/9699919799/utilities/contents.html ² See http://pubs.opengroup.org/onlinepubs/9699919799/utilities/rm.html Let’s turn this specification into one using Ame’s API. We begin by adding a flag for each of the options listed above: class Rm &lt; Ame::Root flag 'f', '', false, 'Do not prompt for confirmation' flag 'i', '', nil, 'Prompt for confirmation' do |options| options['f'] = false end flag 'R', '', false, 'Remove file hierarchies' flag 'r', '', nil, 'Equivalent to -R' do |options| options['r'] = true end A flag¹ is a boolean option that doesn’t take an argument. Each flag gets a short and long name, where an empty name means that there’s no corresponding short or long name for the flag, a default value (true, false, or nil), and a description of what the flag does. Each flag can also optionally take a block that can do further processing. In this case we use this block to modify the Hash that maps option names to their values passed to the block to set other flags’ values than the ones that the block is associated with. As these flags (‘i’ and ‘r’) aren’t themselves of interest, their default values have been set to nil, which means that they won’t be included in the Hash that maps option names to their values when passed to the method. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#flag-class-method There are quite a few other kinds of options besides flags that can be defined using Ame, but flags are all that are required for this example. We’ll get to the other kinds in later examples. Next we add a “splus” argument. splus 'FILE', String, 'File to remove' A splus¹ argument is like a Ruby “splat”, that is, an Array argument at the end of the argument list to a method preceded by a star, except that a splus requires at least one argument. A splus argument gets a name for the argument (‹FILE›), the type of argument it represents (String), and a description. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#splus-class-method Then we add a description of the command (method) itself: description 'Remove directory entries' Descriptions¹ will be used in help output to assist the user in using the command. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#description-class-method Finally, we add the Ruby method that’ll implement the command (all preceding code included here for completeness): class Rm &lt; Ame::Root version '1.0.0' flag 'f', '', false, 'Do not prompt for confirmation' flag 'i', '', nil, 'Prompt for confirmation' do |options| options['f'] = false end flag 'R', '', false, 'Remove file hierarchies' flag 'r', '', nil, 'Equivalent to -R' do |options| options['r'] = true end splus 'FILE', String, 'File to remove' description 'Remove directory entries' def rm(files, options = {}) require 'fileutils' FileUtils.send options['R'] ? :rm_r : :rm, [first] + rest, :force =&gt; options['f'] end end Actually, another bit of code was also added, namely version '1.0.0' This sets the version¹ String of the command. This information is used when the command is invoked with the “‹--version›” flag. This flag is automatically added, so you don’t need to add it yourself. Another flag, “‹--help›”, is also added automatically. When given, this flag’ll make Ame output usage information of the command. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#version-class-method To actually run the command, all you need to do is invoke Rm.process This’ll invoke the command using the command-line arguments stored in ‹ARGV›, but you can also specify other ones if you want to: Rm.process 'rm', %w[-r /tmp/*] The first argument to #process¹ is the name of the method to invoke, which defaults to ‹File.basename($0)›, and the second argument is an Array of Strings that should be processed as command-line arguments passed to the command. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#process-class-method If you’d store the complete ‹Rm› class defined above in a file called ‹rm› and add ‹#! /usr/bin/ruby -w› at the beginning and ‹Rm.process› at the end, you’d have a fully functional ‹rm› command (after making it executable). Let’s see it in action: % rm --help Usage: rm [OPTIONS]... FILE... Remove directory entries Arguments: FILE... File to remove Options: -R Remove file hierarchies -f Do not prompt for confirmation --help Display help for this method -i Prompt for confirmation -r Equivalent to -R --version Display version information % rm --version rm 1.0.0 Some commands are more complex than ‹rm›. For example, ‹git›¹ has a rather complex command-line interface. We won’t mimic it all here, but let’s introduce the rest of the Ame API using a fake ‹git› clone as an example. ¹ See http://git-scm.com/docs/ ‹Git› uses sub-commands to achieve most things. Implementing sub-commands with Ame is done using a “dispatch”. We’ll discuss dispatches in more detail later, but suffice it to say that a dispatch delegates processing to a child class that’ll handle the sub-command in question. We begin by defining our main ‹git› command using a class called ‹Git› under the ‹Git::CLI› namespace: module Git end class Git::CLI &lt; Ame::Root version '1.0.0' class Git &lt; Ame::Class description 'The stupid content tracker' def initialize; end We’re setting things up to use the ‹Git› class as a dispatch in the ‹Git::CLI› class. The description on the ‹initialize› method will be used as a description of the ‹git› dispatch command itself. Next, let’s add the ‹format-patch›¹ sub-command: description 'Prepare patches for e-mail submission' flag ?n, 'numbered', false, 'Name output in [PATCH n/m] format' flag ?N, 'no-numbered', nil, 'Name output in [PATCH] format' do |options| options['numbered'] = false end toggle ?s, 'signoff', false, 'Add Signed-off-by: line to the commit message' switch '', 'thread', 'STYLE', nil, Ame::Types::Enumeration[:shallow, :deep], 'Controls addition of In-Reply-To and References headers' flag '', 'no-thread', nil, 'Disables addition of In-Reply-To and Reference headers' do |options, _| options.delete 'thread' end option '', 'start-number', 'N', 1, 'Start numbering the patches at N instead of 1' multioption '', 'to', 'ADDRESS', String, 'Add a To: header to the email headers' optional 'SINCE', 'N/A', 'Generate patches for commits after SINCE' def format_patch(since = '', options = {}) p since, options end ¹ See http://git-scm.com/docs/git-format-patch/ We’re using quite a few new Ame commands here. Let’s look at each in turn: toggle ?s, 'signoff', false, 'Add Signed-off-by: line to the commit message' A “toggle”¹ is a flag that also has an inverse. Beyond the flags ‘s’ and “signoff”, the toggle also defines “no-signoff”, which will set “signoff” to false. This is useful if you want to support configuration files that set “signoff”’s default to true, but still allow it to be overridden on the command line. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#toggle-class-method When using the short form of a toggle (and flag and switch), multiple ones may be juxtaposed after the initial one. For example, “‹-sn›” is equivalent to “‹-s -n›” to “git format-patch›”. switch '', 'thread', 'STYLE', nil, Ame::Types::Enumeration[:shallow, :deep], 'Controls addition of In-Reply-To and References headers' A “switch”¹ is an option that takes an optional argument. This allows you to have separate defaults for when the switch isn’t present on the command line and for when it’s given without an argument. The third argument to a switch is the name of the argument. We’re also introducing a new concept here in ‹Ame::Types::Enumeration›. An enumeration² allows you to limit the allowed input to a set of Symbols. An enumeration also has a default value in the first item to its constructor (which is aliased as ‹.[]›). In this case, the “thread” switch defaults to nil, but, when given, will default to ‹:shallow› if no argument is given. If an argument is given it must be either “shallow” or “deep”. A switch isn’t required to take an enumeration as its argument default and can take any kind of default value for its argument that Ame knows how to handle. We’ll look at this in more detail later, but know that the type of the default value will be used to inform Ame how to parse a command-line argument into a Ruby value. An argument to a switch must be given, in this case, as “‹--thread=deep›” on the command line. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#switch-class-method ² See http://disu.se/software/ame-1.0/api/user/Ame/Types/Enumeration/ option '', 'start-number', 'N', 1, 'Start numbering the patches at N instead of 1' An “option”¹ is an option that takes an argument. The argument must always be present and may be given, in this case, as “‹--start-number=2›” or “‹--start-number 2›” on the command line. For a short-form option, anything that follows the option is seen as an argument, so assuming that “start-number” also had a short name of ‘S’, “‹-S2›” would be equivalent to “‹-S 2›”, which would be equivalent to “‹--start-number 2›”. Note that “‹-snS2›” would still work as expected. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#option-class-method multioption '', 'to', 'ADDRESS', String, 'Add a To: header to the email headers' A “multioption”¹ is an option that takes an argument and may be repeated any number of times. Each argument will be added to an Array stored in the Hash that maps option names to their values. Instead of taking a default argument, it takes a type for the argument (String, in this case). Again, types are used to inform Ame how to parse command-line arguments into Ruby values. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#multioption-class-method optional 'SINCE', 'N/A', 'Generate patches for commits after SINCE' An “optional”¹ argument is an argument that isn’t required. If it’s not present on the command line it’ll get its default value (the String ‹'N/A'›, in this case). ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#optional-class-method We’ve now covered all kinds of options and one new kind of argument. There are three more types of argument (one that we’ve already seen and two new) that we’ll look into now: “argument”, “splat”, and “splus”. description 'Annotate file lines with commit information' argument 'FILE', String, 'File to annotate' def annotate(file) p file end An “argument”¹ is an argument that’s required. If it’s not present on the command line, an error will be raised (and by default reported to the terminal). As it’s required, it doesn’t take a default, but rather a type. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#argument-class-method description 'Add file contents to the index' splat 'PATHSPEC', String, 'Files to add content from' def add(paths) p paths end A “splat”¹ is an argument that’s not required, but may be given any number of times. The type of a splat is the type of one argument and the type of a splat as a whole is an Array of values of that type. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#splat-class-method description 'Display gitattributes information' splus 'PATHNAME', String, 'Files to list attributes of' def check_attr(paths) p paths end A “splus”¹ is an argument that’s required, but may also be given any number of times. The type of a splus is the type of one argument and the type of a splus as a whole is an Array of values of that type. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#splus-class-method Now that we’ve seen all kinds of options and arguments, let’s look on an additional tool at our disposal, the dispatch¹. class Remote &lt; Ame::Class description 'Manage set of remote repositories' def initialize; end description 'Shows a list of existing remotes' flag 'v', 'verbose', false, 'Show remote URL after name' def list(options = {}) p options end description 'Adds a remote named NAME for the repository at URL' argument 'name', String, 'Name of the remote to add' argument 'url', String, 'URL to the repository of the remote to add' def add(name, url) p name, url end end ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#dispatch-class-method Here we’re defining a child class to Git::CLI::Git called “Remote” that doesn’t introduce anything new. Then we set up the dispatch: dispatch Remote, :default =&gt; 'list' This adds a method called “remote” to Git::CLI::Git that will dispatch processing of the command line to an instance of the Remote class when “‹git remote›” is seen on the command line. The “remote” method expects an argument that’ll be used to decide what sub-command to execute. Here we’ve specified that in the absence of such an argument, the “list” method should be invoked. We add the same kind of dispatch to Git under Git::CLI: dispatch Git and then we’re done. Here’s all the previous code in its entirety: module Git end class Git::CLI &lt; Ame::Root version '1.0.0' class Git &lt; Ame::Class description 'The stupid content tracker' def initialize; end description 'Prepare patches for e-mail submission' flag ?n, 'numbered', false, 'Name output in [PATCH n/m] format' flag ?N, 'no-numbered', nil, 'Name output in [PATCH] format' do |options| options['numbered'] = false end toggle ?s, 'signoff', false, 'Add Signed-off-by: line to the commit message' switch '', 'thread', 'STYLE', nil, Ame::Types::Enumeration[:shallow, :deep], 'Controls addition of In-Reply-To and References headers' flag '', 'no-thread', nil, 'Disables addition of In-Reply-To and Reference headers' do |options, _| options.delete 'thread' end option '', 'start-number', 'N', 1, 'Start numbering the patches at N instead of 1' multioption '', 'to', 'ADDRESS', String, 'Add a To: header to the email headers' optional 'SINCE', 'N/A', 'Generate patches for commits after SINCE' def format_patch(since = '', options = {}) p since, options end description 'Annotate file lines with commit information' argument 'FILE', String, 'File to annotate' def annotate(file) p file end description 'Add file contents to the index' splat 'PATHSPEC', String, 'Files to add content from' def add(paths) p paths end description 'Display gitattributes information' splus 'PATHNAME', String, 'Files to list attributes of' def check_attr(paths) p paths end class Remote &lt; Ame::Class description 'Manage set of remote repositories' def initialize; end description 'Shows a list of existing remotes' flag 'v', 'verbose', false, 'Show remote URL after name' def list(options = {}) p options end description 'Adds a remote named NAME for the repository at URL' argument 'name', String, 'Name of the remote to add' argument 'url', String, 'URL to the repository of the remote to add' def add(name, url) p name, url end end dispatch Remote, :default =&gt; 'list' end dispatch Git end If we put this code in a file called “git” and add ‹#! /usr/bin/ruby -w› at the beginning and ‹Git::CLI.process› at the end, you’ll have a very incomplete git command-line interface on your hands. Let’s look at what some of its ‹--help› output looks like: % git --help Usage: git [OPTIONS]... METHOD [ARGUMENTS]... The stupid content tracker Arguments: METHOD Method to run [ARGUMENTS]... Arguments to pass to METHOD Options: --help Display help for this method --version Display version information Methods: add Add file contents to the index annotate Annotate file lines with commit information check-attr Display gitattributes information format-patch Prepare patches for e-mail submission remote Manage set of remote repositories % git format-patch --help Usage: git format-patch [OPTIONS]... [SINCE] Prepare patches for e-mail submission Arguments: [SINCE=N/A] Generate patches for commits after SINCE Options: -N, --no-numbered Name output in [PATCH] format --help Display help for this method -n, --numbered Name output in [PATCH n/m] format --no-thread Disables addition of In-Reply-To and Reference headers -s, --signoff Add Signed-off-by: line to the commit message --start-number=N Start numbering the patches at N instead of 1 --thread[=STYLE] Controls addition of In-Reply-To and References headers --to=ADDRESS* Add a To: header to the email headers % git remote --help Usage: git remote [OPTIONS]... [METHOD] [ARGUMENTS]... Manage set of remote repositories Arguments: [METHOD=list] Method to run [ARGUMENTS]... Arguments to pass to METHOD Options: --help Display help for this method Methods: add Adds a remote named NAME for the repository at URL list Shows a list of existing remotes § API The previous section gave an introduction to the whole user API in an informal and introductory way. For an indepth reference to the user API, see the {user API documentation}¹. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/ If you want to extend the API or use it in some way other than as a command-line-interface writer, see the {developer API documentation}¹. ¹ See http://disu.se/software/ame-1.0/api/developer/Ame/ § Financing Currently, most of my time is spent at my day job and in my rather busy private life. Please motivate me to spend time on this piece of software by donating some of your money to this project. Yeah, I realize that requesting money to develop software is a bit, well, capitalistic of me. But please realize that I live in a capitalistic society and I need money to have other people give me the things that I need to continue living under the rules of said society. So, if you feel that this piece of software has helped you out enough to warrant a reward, please PayPal a donation to now@disu.se¹. Thanks! Your support won’t go unnoticed! ¹ Send a donation: https://www.paypal.com/cgi-bin/webscr?cmd=_donations&amp;business=now@disu.se&amp;item_name=Ame § Reporting Bugs Please report any bugs that you encounter to the {issue tracker}¹. ¹ See https://github.com/now/ame/issues § Authors Nikolai Weibull wrote the code, the tests, the documentation, and this README. § Licensing Ame is free software: you may redistribute it and/or modify it under the terms of the {GNU Lesser General Public License, version 3}¹ or later², as published by the {Free Software Foundation}³. ¹ See http://disu.se/licenses/lgpl-3.0/ ² See http://gnu.org/licenses/ ³ See http://fsf.org/

== Terminal UIs, the Ruby Way RatatuiRuby[https://rubygems.org/gems/ratatui_ruby] is a RubyGem built on Ratatui[https://ratatui.rs], a leading TUI library written in Rust[https://rust-lang.org]. You get native performance with the joy of Ruby. gem install ratatui_ruby {rdoc-image:https://ratatui-ruby.dev/hero.gif}[https://www.ratatui-ruby.dev/docs/v0.10/examples/app_cli_rich_moments/README_md.html] === Rich Moments Add a spinner, a progress bar, or an inline menu to your CLI script. No full-screen takeover. Your terminal history stays intact. ==== Inline Viewports Standard TUIs erase themselves on exit. Your carefully formatted CLI output disappears. Users lose their scrollback. <b>Inline viewports</b> solve this. They occupy a fixed number of lines, render rich UI, then leave the output in place when done. Perfect for spinners, menus, progress indicators—any brief moment of richness. require "ratatui_ruby" RatatuiRuby.run(viewport: :inline, height: 1) do |tui| until connected? status = tui.paragraph(text: "\#{spin} Connecting...") tui.draw { |frame| frame.render_widget(status, frame.area) } end end === Build Something Real Full-screen applications with {keyboard and mouse input}[https://www.ratatui-ruby.dev/docs/v0.10/examples/app_all_events/README_md.html]. The managed loop sets up the terminal and restores it on exit, even after crashes. RatatuiRuby.run do |tui| loop do tui.draw do |frame| frame.render_widget( tui.paragraph(text: "Hello, RatatuiRuby!", alignment: :center), frame.area ) end case tui.poll_event in { type: :key, code: "q" } then break else nil end end end ==== Widgets included: [Layout] {Block}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_block/README_md.html], {Center}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_center/README_md.html], {Clear (Popup, Modal)}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_popup/README_md.html], {Layout (Split, Grid)}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_layout_split/README_md.html], {Overlay}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_overlay/README_md.html] [Data] {Bar Chart}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_barchart/README_md.html], {Chart}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_chart/README_md.html], {Gauge}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_gauge/README_md.html], {Line Gauge}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_line_gauge/README_md.html], {Sparkline}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_sparkline/README_md.html], {Table}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_table/README_md.html] [Text] {Cell}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_cell/README_md.html], {List}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_list/README_md.html], {Rich Text (Line, Span)}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_rich_text/README_md.html], {Scrollbar (Scroll)}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_scrollbar/README_md.html], {Tabs}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_tabs/README_md.html] [Graphics] {Calendar}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_calendar/README_md.html], {Canvas}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_canvas/README_md.html], {Map (World Map)}[https://www.ratatui-ruby.dev/docs/v0.10/examples/widget_map/README_md.html] Need something else? {Build custom widgets}[https://www.ratatui-ruby.dev/docs/v0.10/doc/concepts/custom_widgets_md.html] in Ruby! --- === Testing Built In TUI testing is tedious. You need a headless terminal, event injection, snapshot comparisons, and style assertions. RatatuiRuby bundles all of it. require "ratatui_ruby/test_helper" class TestColorPicker < Minitest::Test include RatatuiRuby::TestHelper def test_swatch_widget with_test_terminal(10, 3) do RatatuiRuby.draw do |frame| frame.render_widget(Swatch.new(:red), frame.area) end assert_cell_style 2, 1, char: "█", bg: :red end end end ==== What's inside: - <b>Headless terminal</b> — No real TTY needed - <b>Snapshots</b> — Plain text and rich (ANSI colors) - <b>Event injection</b> — Keys, mouse, paste, resize - <b>Style assertions</b> — Color, bold, underline at any cell - <b>Test doubles</b> — Mock frames and stub rects - <b>UPDATE_SNAPSHOTS=1</b> — Regenerate baselines in one command --- ==== Inline Menu Example require "ratatui_ruby" # This example renders an inline menu. Arrow keys select, enter confirms. # The menu appears in-place, preserving scrollback. When the user chooses, # the TUI closes and the script continues with the selected value. class RadioMenu CHOICES = ["Production", "Staging", "Development"] # ASCII strings are universally supported. PREFIXES = { active: "●", inactive: "○" } # Some terminals may not support Unicode. CONTROLS = "↑/↓: Select | Enter: Choose | Ctrl+C: Cancel" # Let users know what keys you handle. TITLES = ["Select Environment", # The default title position is top left. { content: CONTROLS, # Multiple titles can save space. position: :bottom, # Titles go on the top or bottom, alignment: :right }] # aligned left, right, or center def call # This method blocks until a choice is made. RatatuiRuby.run(viewport: :inline, height: 5) do |tui| # RatauiRuby.run manages the terminal. @tui = tui # The TUI instance is safe to store. show_menu until chosen? # You can use any loop keyword you like. end # `run` won't return until your block does, RadioMenu::CHOICES[@choice] # so you can use it synchronously. end # Classes like RadioMenu are convenient for private # CLI authors to offer "rich moments." def show_menu = @tui.draw do |frame| # RatatuiRuby gives you low-level access. widget = @tui.paragraph( # But the TUI facade makes it easy to use. text: menu_items, # Text can be spans, lines, or paragraphs. block: @tui.block(borders: :all, titles: TITLES) # Blocks give you boxes and titles, and hold ) # one or more widgets. We only use one here, frame.render_widget(widget, frame.area) # but "area" lets you compose sub-views. end def chosen? # You are responsible for handling input. interaction = @tui.poll_event # Every frame, you receive an event object: return choose if interaction.enter? # Key, Mouse, Resize, Paste, FocusGained, # FocusLost, or None objects. They come with move_by(-1) if interaction.up? # predicates, support pattern matching, and move_by(1) if interaction.down? # can be inspected for properties directly. quit! if interaction.ctrl_c? # Your application must handle every input, false # even interrupts and other exit patterns. end def choose # Here, the loop is about to exit, and the prepare_next_line # block will return. The inline viewport @choice # will be torn down and the terminal will end # be restored, but you are responsible for # positioning the cursor. def prepare_next_line # To ensure the next output is on a new area = @tui.viewport_area # line, query the viewport area and move RatatuiRuby.cursor_position = [0, area.y + area.height] # the cursor to the start of the last line. puts # Then print a newline. end def quit! # All of your familiar Ruby control flow prepare_next_line # keywords work as expected, so we can exit 0 # use them to leave the TUI. end def move_by(line_count) # You are in full control of your UX, so @choice = (@choice + line_count) % CHOICES.size # you can implement any logic you need: end # Would you "wrap around" here, or not? # def menu_items = CHOICES.map.with_index do |choice, i| # Notably, RatatuiRuby has no concept of "\#{prefix_for(i)} \#{choice}" # "menus" or "radio buttons". You are in end # full control, but it also means you must def prefix_for(choice_index) # implement the logic yourself. For larger return PREFIXES[:active] if choice_index == @choice # applications, consider using Rooibos, PREFIXES[:inactive] # an MVU framework built with RatatuiRuby. end # Or, use the upcoming ratatui-ruby-kit, # our object-oriented component library. def initialize = @choice = 0 # However, those are both optional, and end # designed for full-screen Terminal UIs. # RatatuiRuby will always give you the most choice = RadioMenu.new.call # control, and is enough for "rich CLI puts "You chose \#{choice}!" # moments" like this one. --- === Full App Solutions RatatuiRuby renders. For complex applications, add a framework that manages state and composition. ==== Rooibos[https://www.rooibos.run] (Framework) Model-View-Update architecture. Inspired by Elm, Bubble Tea, and React + Redux. Your UI is a pure function of state. - Functional programming with MVU - Commands work off the main thread - Messages, not callbacks, drive updates ==== {Kit}[https://sr.ht/~kerrick/ratatui_ruby/#chapter-3-the-object-path--kit] (Coming Soon) Component-based architecture. Encapsulate state, input handling, and rendering in reusable pieces. - OOP with stateful components - Separate UI state from domain logic - Built-in focus management & click handling Both use the same widget library and rendering engine. Pick the paradigm that fits your brain. --- === Why RatatuiRuby? Ruby deserves world-class terminal user interfaces. TUI developers deserve a world-class language. RatatuiRuby wraps Rust's Ratatui via native extension. The Rust library handles rendering. Your Ruby code handles design. >>> "Text UIs are seeing a renaissance with many new TUI libraries popping up. The Ratatui bindings have proven to be full featured and stable." — {Mike Perham}[https://www.mikeperham.com/], creator of Sidekiq[https://sidekiq.org/] and Faktory[https://contribsys.com/faktory/] ==== Why Rust? Why Ruby? Rust excels at low-level rendering. Ruby excels at expressing domain logic and UI. RatatuiRuby puts each language where it performs best. ==== Versus CharmRuby CharmRuby[https://charm-ruby.dev/] wraps Charm's Go libraries. Both projects give Ruby developers TUI options. [Integration] CharmRuby: Two runtimes, one process. RatatuiRuby: Native extension in Rust. [Runtime] CharmRuby: Go + Ruby (competing). RatatuiRuby: Ruby (Rust has no runtime). [Memory] CharmRuby: Two uncoordinated GCs. RatatuiRuby: One Garbage Collector. [Style] CharmRuby: The Elm Architecture (TEA). RatatuiRuby: TEA, OOP, or Imperative. --- === Links [Get Started] {Quickstart}[https://www.ratatui-ruby.dev/docs/v0.10/doc/getting_started/quickstart_md.html], {Examples}[https://www.ratatui-ruby.dev/docs/v0.10/examples/app_cli_rich_moments/README_md.html], {API Reference}[https://www.ratatui-ruby.dev/docs/v0.10/], {Guides}[https://www.ratatui-ruby.dev/docs/v0.10/doc/index_md.html] [Ecosystem] Rooibos[https://www.rooibos.run], {Kit}[https://sr.ht/~kerrick/ratatui_ruby/#chapter-3-the-object-path--kit] (Planned), {Framework}[https://sr.ht/~kerrick/ratatui_ruby/#chapter-5-the-framework] (Planned), {UI Widgets}[https://sr.ht/~kerrick/ratatui_ruby/#chapter-6-licensing] (Planned) [Community] {Forum}[https://forum.setdef.com/c/ratatui-ruby/6], {Announcements}[https://forum.setdef.com/tags/c/ratatui-ruby/6/announcement], {Discussion}[https://forum.setdef.com/tags/c/ratatui-ruby/6/discussion], {Bug Tracker}[https://forum.setdef.com/tags/c/ratatui-ruby/6/bug] [Contribute] {Contributing Guide}[https://man.sr.ht/~kerrick/ratatui_ruby/contributing.md], {Code of Conduct}[https://man.sr.ht/~kerrick/ratatui_ruby/code_of_conduct.md], {Project History}[https://man.sr.ht/~kerrick/ratatui_ruby/history/index.md], {Pull Requests}[https://forum.setdef.com/tags/c/ratatui-ruby/6/patch] --- [Website] https://www.ratatui-ruby.dev [Source] https://github.com/setdef/RatatuiRuby [RubyGems] https://rubygems.org/gems/ratatui_ruby [Upstream] https://ratatui.rs [Build Status] https://builds.sr.ht/~kerrick/ratatui_ruby © 2026 Kerrick Long · Library: LGPL-3.0-or-later · Website: CC-BY-NC-ND-4.0 · Snippets: MIT-0

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.